Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

MF Instant Gratification Mapping V1.0 (S4 and other controllers)

Home :: MIDIfighter Resources and Discussion :: MF Instant Gratification Mapping V1.0 (S4 and other controllers)Reply

MF Instant Gratification Mapping V1.0 (S4 and other controllers) Posted on: 07.02.2011 by Download the mapping here: http://www.djranking s.com/wp-conten...4Banks-1.0.zip This mapping requires 4 banks mode to be activated Learn how to enable 4 banks mode here: http://www.djranking s.com/community /showthread.php?t=9961 This mapping was designed for the S4 but is compatible with Traktor Pro and all controllers. If you have an older MF (pre 2/2011) you will need to update the firmware Get the auto firmware updater here (mac and pc): http://www.djranking s.com/community /showthread.php?t=24401
Jodi Lacerra 07.11.2011	Originally Posted by Zinorino i just bought the midifighter and added the instant gratification mapping. but it doesnt uses the same effects as ean golden in his video. and if i change them, they change back if i press a button. PLEASE HELP The effect settings most likely did not load properly. Please import the tsi file again using the large import button on the bottom left of the preferences window and then the effects should show up as in Ean's video. For the first time importing any of our mappings, you usually need to import twice in order for the effect settings to properly load (this is a weird traktor bug).
Jenny Ramrup 07.10.2011	Hi, i
Jodi Lacerra 18.07.2011	Originally Posted by Dj Pascman I too am getting this problem... when i import the mapping to traktor scratch pro, the assign table is empty ! what am i doing wrong ??? HELP edit im on windows 7 if that helps... If the assignment table is empty there is either an issue with the tsi file (make sure it is unzipped) you are trying to import or you are running an older version of traktor. in general you need version traktor pro version 1.2.4 or greater to properly import and use these mappings.
Jodi Lacerra 18.07.2011	Originally Posted by Escobar I too am having issues with my MF. I cant seem to get any response in traktor using the instant gratification mapping. I'm using the MF in conjunction with my S4 and am running the latest updates and firmware. I've tried reflashing my MF numerous times and it's running in 4 banks internal mode. I've imported the .tsi twice using the big import button. I have the correct effects chains stored in the effects banks and seem to be sending out midi notes (CTRL light is flashing
Jodi Lacerra 18.07.2011	Originally Posted by dr.sinclair Where can i Switch the Decks ? I have Traktor scratch pro and the S4 Controller + midi Fighter with this update. All Effects just work on Deck A. Where can i Change to Deck b or c ? You need your MF to be in 4 Banks mode. Then the 4 banks buttons (the top row) will toggle to indicate which Deck A through D, you are controlling.
Jodi Lacerra 18.07.2011	Originally Posted by thedjwoody Call me crazy but I dont see exactly what this update changed. Granted, im not currently using my s4 with the midifighter since its getting repaired, but I dont see any difference in the mapping on the MF. What changed??? I cant see it. minor bug fixes. no major functionality changed.
Jodi Lacerra 18.07.2011	Originally Posted by Rudy 1. Would you know if it would be possible to use the VCI 100 channel faders as "Smart Faders" using any spare modifiers not used by the VCI--like with the new midi fighters? 2. Would you happen to know how many (and which) modifiers does the VCI uses by itself--to save me the reverse engineering? :-) or 3. What is the DYI cost of upgrading the Midi Fighter I to the midi fighter II? (to forgo the whole process mentioned above) 1. I suppose you could try to do something like this as I remember the VCI faders putting out two CC's in opposite directions and a note at the bottom. It's been a while since I've tested this though. To do this you would need to make a new generic midi mapping though as the vci mapping is tapped out of modifiers. 2. The VCI mapping uses all 8 modifiers. If you are going to add to it, I would just add a new mapping and have both mappings ports set just to the VCI. Just make sure to watch out for conflicts between the two mappings when designing.
Rebbeca Geohagan 01.07.2011	Originally Posted by Escobar First post and just wanted to say how much I love this community ! It's such a great resource for knowledge and inspiration! much respect. I too am having issues with my MF. I cant seem to get any response in traktor using the instant gratification mapping. I'm using the MF in conjunction with my S4 and am running the latest updates and firmware. I've tried reflashing my MF numerous times and it's running in 4 banks internal mode. I've imported the .tsi twice using the big import button. I have the correct effects chains stored in the effects banks and seem to be sending out midi notes (CTRL light is flashing
Daniell Knopf 25.01.2012	derp I got it sorry
Daniell Knopf 25.01.2012	Hey when I try to download the mapping it appears as a winzip file and not a tsi. help please?
Laine Paskiewicz 23.01.2012	Hey I was wondering what do I have to do/change so that my midi fighter classic will work on all 4 of decks on Traktor Pro 2 along with my Kontrol S4???? would be a great help if someone helped me out
Jodi Lacerra 07.11.2011	Originally Posted by Zinorino i just bought the midifighter and added the instant gratification mapping. but it doesnt uses the same effects as ean golden in his video. and if i change them, they change back if i press a button. PLEASE HELP The effect settings most likely did not load properly. Please import the tsi file again using the large import button on the bottom left of the preferences window and then the effects should show up as in Ean's video. For the first time importing any of our mappings, you usually need to import twice in order for the effect settings to properly load (this is a weird traktor bug).
Contessa Elizaldi 03.11.2011	i just bought the midifighter and added the instant gratification mapping. but it doesnt uses the same effects as ean golden in his video. and if i change them, they change back if i press a button. PLEASE HELP
Brigitte Wiemann 21.10.2011	How did they know I needed this mapping now?
Laine Bloker 19.10.2011	Hello! I just got my midifighter, i'm using it with traktor and kontrol x1, i'm believeing it's best for me to use for effects and i believe this instant gratification mapping would be the best for me! Why it needs "4deck mode" ? I cant get it to work. The MF utility tool wont start "application crash x123010238183xxrandom" and the other instruction seem kinda complicated. Any ideas? I'm using windows 7 64bit i believe..
Jenny Ramrup 07.10.2011	Hi, i
Jodi Lacerra 18.07.2011	Originally Posted by Dj Pascman I too am getting this problem... when i import the mapping to traktor scratch pro, the assign table is empty ! what am i doing wrong ??? HELP edit im on windows 7 if that helps... If the assignment table is empty there is either an issue with the tsi file (make sure it is unzipped) you are trying to import or you are running an older version of traktor. in general you need version traktor pro version 1.2.4 or greater to properly import and use these mappings.
Jodi Lacerra 18.07.2011	Originally Posted by Escobar I too am having issues with my MF. I cant seem to get any response in traktor using the instant gratification mapping. I'm using the MF in conjunction with my S4 and am running the latest updates and firmware. I've tried reflashing my MF numerous times and it's running in 4 banks internal mode. I've imported the .tsi twice using the big import button. I have the correct effects chains stored in the effects banks and seem to be sending out midi notes (CTRL light is flashing
Jodi Lacerra 18.07.2011	Originally Posted by dr.sinclair Where can i Switch the Decks ? I have Traktor scratch pro and the S4 Controller + midi Fighter with this update. All Effects just work on Deck A. Where can i Change to Deck b or c ? You need your MF to be in 4 Banks mode. Then the 4 banks buttons (the top row) will toggle to indicate which Deck A through D, you are controlling.
Jodi Lacerra 18.07.2011	Originally Posted by thedjwoody Call me crazy but I dont see exactly what this update changed. Granted, im not currently using my s4 with the midifighter since its getting repaired, but I dont see any difference in the mapping on the MF. What changed??? I cant see it. minor bug fixes. no major functionality changed.
Jodi Lacerra 18.07.2011	Originally Posted by Rudy 1. Would you know if it would be possible to use the VCI 100 channel faders as "Smart Faders" using any spare modifiers not used by the VCI--like with the new midi fighters? 2. Would you happen to know how many (and which) modifiers does the VCI uses by itself--to save me the reverse engineering? :-) or 3. What is the DYI cost of upgrading the Midi Fighter I to the midi fighter II? (to forgo the whole process mentioned above) 1. I suppose you could try to do something like this as I remember the VCI faders putting out two CC's in opposite directions and a note at the bottom. It's been a while since I've tested this though. To do this you would need to make a new generic midi mapping though as the vci mapping is tapped out of modifiers. 2. The VCI mapping uses all 8 modifiers. If you are going to add to it, I would just add a new mapping and have both mappings ports set just to the VCI. Just make sure to watch out for conflicts between the two mappings when designing.
Rebbeca Geohagan 01.07.2011	Originally Posted by Escobar First post and just wanted to say how much I love this community ! It's such a great resource for knowledge and inspiration! much respect. I too am having issues with my MF. I cant seem to get any response in traktor using the instant gratification mapping. I'm using the MF in conjunction with my S4 and am running the latest updates and firmware. I've tried reflashing my MF numerous times and it's running in 4 banks internal mode. I've imported the .tsi twice using the big import button. I have the correct effects chains stored in the effects banks and seem to be sending out midi notes (CTRL light is flashing
Mildred Grody 01.07.2011	First post and just wanted to say how much I love this community ! It's such a great resource for knowledge and inspiration! much respect. I too am having issues with my MF. I cant seem to get any response in traktor using the instant gratification mapping. I'm using the MF in conjunction with my S4 and am running the latest updates and firmware. I've tried reflashing my MF numerous times and it's running in 4 banks internal mode. I've imported the .tsi twice using the big import button. I have the correct effects chains stored in the effects banks and seem to be sending out midi notes (CTRL light is flashing
Jeanetta Barni 23.06.2011	yea dude, just check this out. #5 is select 4 banks mode. Follow the instructions and do 4 banks internal mode. After you do this the top 4 buttons on the midifighter will be deck selections instead of what they are now. http://www.djranking s.com/community /showthread.php?t=9961
Ernestina Hartsel 23.06.2011	Where can i Switch the Decks ? I have Traktor scratch pro and the S4 Controller + midi Fighter with this update. All Effects just work on Deck A. Where can i Change to Deck b or c ?
Jeanetta Barni 22.06.2011	Call me crazy but I dont see exactly what this update changed. Granted, im not currently using my s4 with the midifighter since its getting repaired, but I dont see any difference in the mapping on the MF. What changed??? I cant see it.
Jamika Codding 21.06.2011	Originally Posted by flashflooder Cool idea, but unfortunately this isn't possible because there are absolutely no modifiers left. It took me a few redesigns of the modifier structure to even get this much functionality in one mapping. Sounds like a good mapping idea though for a second Midi Fighter though. Hey flashflooder, Thanks for the reply. I have 3 questions with the assumption that a new Midi fighter mapping will be created (also assuming the the Instant Gratification mapping won't be used): 1. Would you know if it would be possible to use the VCI 100 channel faders as "Smart Faders" using any spare modifiers not used by the VCI--like with the new midi fighters? 2. Would you happen to know how many (and which) modifiers does the VCI uses by itself--to save me the reverse engineering? :-) or 3. What is the DYI cost of upgrading the Midi Fighter I to the midi fighter II? (to forgo the whole process mentioned above) Thanks, Rudy
Russ Strutt 21.06.2011	Originally Posted by dr.sinclair any got one? It's in the download list just look
Ernestina Hartsel 20.06.2011	Originally Posted by Nicky H Is there a pdf or something with labels for the buttons? any got one?
Lorina Dubrosky 24.05.2011	Can you shed some more light on how to solve this mac issue raised by Zac. I just got mine and am dealing with similar issues, just not sure how to manually make sure the update is registered etc.
Tatum Ansaldo 17.05.2011	They're all here: http://www.djranking s.com/community /showthread.php?t=24757
Myrtice Mandrick 17.05.2011	Originally Posted by photojojo From the post linked in the first thread here http://www.djranking s.com/community /showthread.php?t=24514 Originally Posted by No Left Turn I believe I've found them all, but not sure if everyone wants the fun to be spoiled. I would definitely appreciate a PM with all the combos, too. - Runaway
Magaret Leffelman 02.05.2011	I have a midi fighter with the gratification mode. How can i use it to affect all 4 decks at the same time instead of actually choosing the deck that the effect will work on... thank you
Jodi Lacerra 29.04.2011	This mapping has been updated to fix a few minor bugs. See this thread: http://www.djranking s.com/community /showthread.php?t=29351
Geraldo Ottesen 25.04.2011	Hey guys having a bit of a problem getting into four banks mode to use the IG mapping, I have the latest firm ware , but since they released that the last pcbs had "bugs" and you have to manually reset in boot mode I have no clue how to use the "increments" in the menu mode without the lights showing me how to , I have the IG mapping working but only on one deck
Jodi Lacerra 22.04.2011	Originally Posted by Rudy I am not sure if this is a dumb question; however, I have some ideas I would like to implement on top of the Instant gratification/VCI mappings. Would anyone happen to know how I can get a cheat-sheet of the modifiers used for both mappings? If I am able to accomplish what I am believeing about, I will definitely share & document the spoils. This is what I am believeing: Having the 4 banks instant gratification map on the MF act as it normally does with the exception that if you tap the bank button again, the button will blink (instead of staying on solid), and you will enter a cue/loop-juggling mode. For TP2, I am believeing of reversing the bank buttons for the "C" and "D" decks. Single bank button tap will go into loop-juggle mode. I have to experiment with the FX (as I am still learning TP2). I guess, I can hack at it. I thought I would first attempt to find out if there were any easier ways first. Thanks, Rudy Cool idea, but unfortunately this isn't possible because there are absolutely no modifiers left. It took me a few redesigns of the modifier structure to even get this much functionality in one mapping. Sounds like a good mapping idea though for a second Midi Fighter though.
Jayne Watland 19.04.2011	The bottom 3 rows work for deck a. But the top bank works for deck B. Can't seem to figure out why. All of the controls seem to mimic what Ean is doing on bottom 3 banks in video. Flashed the latest firmware. Have Traktor Pro 2 on PC with Win 7.....any ideas? Also have 4 decks mode set.
Yon Gigler 19.04.2011	Originally Posted by GeekGod Did you change the order of the FX before importing the mapping as outlined prior in this thread? I'm not totally sure what you mean? I've went through this whole thread and found nothing to help me. All the other buttons and combos work fine.
Rosina Steinkuehler 19.04.2011	Originally Posted by hesitant I've found an issue with mine. Effect bank 2 has reverse grain / beatmasher / reverb when I loaded the mapping. But if I press the 4 buttons at the bottom of the midi fighter from left to right while hold the previous button (operating effect bank 1) the reverse grain on efx 2 changes to gator Anyone any idea? Did you change the order of the FX before importing the mapping as outlined prior in this thread?
Yon Gigler 19.04.2011	I've found an issue with mine. Effect bank 2 has reverse grain / beatmasher / reverb when I loaded the mapping. But if I press the 4 buttons at the bottom of the midi fighter from left to right while hold the previous button (operating effect bank 1) the reverse grain on efx 2 changes to gator Anyone any idea?

<< Back to MIDIfighter Resources and Discussion Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy

The best DJ in Barbados is:

MF Instant Gratification Mapping V1.0 (S4 and other controllers)