Download the Latest VCI-100 Mapping (3_5_1)

Home :: DJ TechTools' VCI-100 FAQ :: Download the Latest VCI-100 Mapping (3_5_1)Reply
Download the Latest VCI-100 Mapping (3_5_1)
Posted on: 30.03.2010 by
The following changes have been made to this file:

  • Fixed a bug where Fader FX would get stuck
  • Fixed a bug where Juggle would stick
  • Fixed a bug where the pitch would drop dramatically
  • Changed FX preset #4 to match the recent video.



Download the File here

Requirements
You must have Traktor 1.24 or later to use this file otherwise it will not import properly.


To Load this file
  • Select the BIG import button in the lower left hand corner of the preferences tab.
  • if this is your first time loading the TSI file, please load it 2 TIMES for the fx to load properly.
  • The 1rst and 2nd time you run Traktor after importing a TSi file, the controller may lock up. Just quit the program twice and see if the issue goes away.


What Settings to Load

• MIDI: Everyone
• EFFECTS: Everyone (please load this file twice if you are using it for the first time to load the FX properly)
• LAYOUT: Only if you want the layout to change when switching decks from A/B to C/D. To customize your own, modify the layouts in position 1 and 3.
• ALL OTHER SETTINGS: Import these if you want the Pitch fader to be set to 8%, and for deck copy to work perfectly.



VIDEO TUTORIALS

Part 1
Part 2


Purchase the matching overlays]


Known Issues for VCI-100 owners with firmware Version 1.2

• The “D” button in the FX section will not work as indicated.
• In Fader FX mode, the level fader's will not “freeze” effects as in version 1.3.
• The Sync button for Decks A and C will not properly light up when synced.

Having Problems with the FX Route Button?

There is a file included that fixes this problem for windows users that are getting this glitch. The problem relates to Traktor's Midi engine and windows. To solve the problem we disabled the LED functions. You can use the FX route button to route the FX but the LEDs will not display.
Edris Acevedo
31.03.2010
Originally Posted by mauperez5
Thank you very much for the recommendations , make each recommendation that gave the LED does not work, I am surprised that happen are very tough and buy 2 months ago VCI-100 SE.
Apply DJTechTools warranty?, Or I can do to repair the led?
It depends on how confident you are in replacing the LED's yourself. Im pretty sure there is a guide somewhere. Try doing a search alternatively e-mail Tech tools directly and arrange for a replacement to be sent. Good Luck
Corine Kasman
31.03.2010
Originally Posted by atrain01us
Hi,

I just downloaded and imported the latest update for my vci-100 and v1.25 of TSP v1.2.5.

I have questions about some of the functions:

1) After importing the new .tsi file and selecting the vci-100 in the controller page and then closing the preferences window, if I then go back into the preferences window and the controller page, the selected controller reverts back to 'generic keyboard'. Why isn't the selected controller being remembered by the Traktor software? Am I missing something?

2) The faders for the 2 two decks(A & B for example) on the vci-100 do not seem to be controlling the same in Traktor in terms of volume. Also I cannot see the crossfader move in the software even though I enabled the display of the corssfader in the preferences.

3) The pitch faders are not going thru the full range. They don't move above the center detent on the vci-100 and only go below the center detent for a small distance.

What am I missing here with these issues?

thanks,

Arthur
I'll have a go at this one as my punishment for jumping the gun on page 1.

Arthur, welcome to the community .

Your selected controller is in the order loaded. i.e. the computer's keyboard mapping was done first so it is first on the list. Your VCI is still there and is considered as a fully valid input, regardless of where it appears on the controller list.

What IS important though is that when you select the VCI, you now also see it's ports. You MUST set the ports for the VCI from "all ports" to "Vestax PC controller" for both the In and Out. This is what I forgot to do and posted my non-bug on page 1.

For the faders move them through there full sweep (all the way up/over and back) Traktor will "find" them an you should be OK.

The pitch is another subject. DJTT always sets the faders to 8% (like on a 1200 TT). This is a personal preference, so if you want more, you have to dig into the TSI. Its easy, after selecting your VCI in the device menu, scroll down to the first "Tempo" (there will be 4 together, 1 for each deck). Click on the first "Tempo", you will see at the very bottom "Rotary Sensitivity", it is set to 40%. Increase this to whatever suits you pitch needs (100% will get you 50% increase/decrease range), if you need more then click on the left menu and at the top you will see "Pitch" change this value to 100% and go back and adjust the "Tempo" in the mapping. DO NOT forget to change the "Tempo" % for all 4 decks, you well get really screwed up otherwise!

Clear as mud?

Happy mixing, Phil.
Dee Atondo
31.03.2010		Tested out the new mapping on VCI 100 SE (w/ 3_5 mapping) and Midi Fighter (w/ 1_1 mapping)--working great. Enjoying the new FX preset. Good job DJTT.
Arturo Jimenez
31.03.2010		Hi,

I just downloaded and imported the latest update for my vci-100 and v1.25 of TSP v1.2.5.

I have questions about some of the functions:

1) After importing the new .tsi file and selecting the vci-100 in the controller page and then closing the preferences window, if I then go back into the preferences window and the controller page, the selected controller reverts back to 'generic keyboard'. Why isn't the selected controller being remembered by the Traktor software? Am I missing something?

2) The faders for the 2 two decks(A & B for example) on the vci-100 do not seem to be controlling the same in Traktor in terms of volume. Also I cannot see the crossfader move in the software even though I enabled the display of the corssfader in the preferences.

3) The pitch faders are not going thru the full range. They don't move above the center detent on the vci-100 and only go below the center detent for a small distance.

What am I missing here with these issues?

thanks,

Arthur
Charlott Deblieck
01.04.2010
Originally Posted by Audio Aerosol
If I have understood your problem correctly. The LED's for the Juggle buttons have stopped working on your VCI after importing the New 3.5 TSI. Have you checked to make sure your ports are selected as VCI? I would also try and re-load an old TSI to see if the LED's work again or set up a new midi map for those buttons to check they still function. This will tell you whether its a TSI issue or whether your LED's have died. I haven't tested it yet so can't tell you if I have the same issue but I'm sure someone else will
Thank you very much for the recommendations , make each recommendation that gave the LED does not work, I am surprised that happen are very tough and buy 2 months ago VCI-100 SE.
Apply DJTechTools warranty?, Or I can do to repair the led?
Khalilah Srp
31.03.2010		thanx for the new mapping!!!! u guys are the best!!!
will test it toevening and hopefully vote "stable"
thanx again

jos
Quiana Mahnken
31.03.2010		so far very good works great will let you know if any problems will set to long test run to see that it does not crash very good
Edris Acevedo
31.03.2010
Originally Posted by mauperez5
Hi guys.
First of all sorry for my bad English, I'm from Mexico and does not concern me much English but hey, get to the point, a month ago that I enjoy my VCI-100 SE, with the mapping used it had a 3.3 and another problem in the software but not in my driver, yesterday installed the mapping 3.5 and there was a problem with my controller, located on the left button does not turn blue slice to juggle 1-4 or 5-8 Is it software problem or My driver, perhaps it will have melted the blue LED?
If I have understood your problem correctly. The LED's for the Juggle buttons have stopped working on your VCI after importing the New 3.5 TSI. Have you checked to make sure your ports are selected as VCI? I would also try and re-load an old TSI to see if the LED's work again or set up a new midi map for those buttons to check they still function. This will tell you whether its a TSI issue or whether your LED's have died. I haven't tested it yet so can't tell you if I have the same issue but I'm sure someone else will
Charlott Deblieck
31.03.2010		Hi guys.
First of all sorry for my bad English, I'm from Mexico and does not concern me much English but hey, get to the point, a month ago that I enjoy my VCI-100 SE, with the mapping used it had a 3.3 and another problem in the software but not in my driver, yesterday installed the mapping 3.5 and there was a problem with my controller, located on the left button does not turn blue slice to juggle 1-4 or 5-8 Is it software problem or My driver, perhaps it will have melted the blue LED?
Tanesha Nigbur
30.03.2010		Thanks for the release guys, will let you know if I run in to any bugs! Also, the mailers you guys have been sending out are great!
Jodi Lacerra
30.03.2010		A bug where turning the Wet/Dry knob (for an advanced effect) would disable effect parameter 2 from being on has also been fixed (as well as a few other minor bugs).

If you experience something you interpret to be a bug, please share your findings and try to be as specific as possible with the problem (to help with our diagnosis/fix). In addition, please include your Traktor Pro version, Firmware version, and Computer type. Thanks.

<< Back to DJ TechTools' VCI-100 FAQReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy