Download the Latest VCI-100 Mapping (3_5_1)

Home :: DJ TechTools' VCI-100 FAQ :: Download the Latest VCI-100 Mapping (3_5_1)Reply
Download the Latest VCI-100 Mapping (3_5_1)
Posted on: 30.03.2010 by
The following changes have been made to this file:

  • Fixed a bug where Fader FX would get stuck
  • Fixed a bug where Juggle would stick
  • Fixed a bug where the pitch would drop dramatically
  • Changed FX preset #4 to match the recent video.



Download the File here

Requirements
You must have Traktor 1.24 or later to use this file otherwise it will not import properly.


To Load this file
  • Select the BIG import button in the lower left hand corner of the preferences tab.
  • if this is your first time loading the TSI file, please load it 2 TIMES for the fx to load properly.
  • The 1rst and 2nd time you run Traktor after importing a TSi file, the controller may lock up. Just quit the program twice and see if the issue goes away.


What Settings to Load

• MIDI: Everyone
• EFFECTS: Everyone (please load this file twice if you are using it for the first time to load the FX properly)
• LAYOUT: Only if you want the layout to change when switching decks from A/B to C/D. To customize your own, modify the layouts in position 1 and 3.
• ALL OTHER SETTINGS: Import these if you want the Pitch fader to be set to 8%, and for deck copy to work perfectly.



VIDEO TUTORIALS

Part 1
Part 2


Purchase the matching overlays]


Known Issues for VCI-100 owners with firmware Version 1.2

• The “D” button in the FX section will not work as indicated.
• In Fader FX mode, the level fader's will not “freeze” effects as in version 1.3.
• The Sync button for Decks A and C will not properly light up when synced.

Having Problems with the FX Route Button?

There is a file included that fixes this problem for windows users that are getting this glitch. The problem relates to Traktor's Midi engine and windows. To solve the problem we disabled the LED functions. You can use the FX route button to route the FX but the LEDs will not display.
Leeanna Ayla
05.08.2010
Originally Posted by macrylinda1
Hi guys.
First of all sorry for my bad English, I'm from Mexico and does not concern me much English but hey, get to the point, a month ago that I enjoy my VCI-100 SE, with the mapping used it had a 3.3 and another problem in the software but not in my driver, yesterday installed the mapping 3.5 and there was a problem with my controller, located on the left button does not turn blue slice to juggle 1-4 or 5-8 Is it software problem or My driver, perhaps it will have melted the blue LED?
Reply With Quote
Sometimes it takes loading the tsi a few times to work correctly. There's also a glitch fix file in the zip file you downloaded. That reduces the number of midi messages going out and some PC's need that to work correctly.
Bobbi Westergren
05.08.2010
Originally Posted by papachilla
Thanks for the release guys, will let you know if I run in to any bugs! Also, the mailers you guys have been sending out are great!
Hi guys.
First of all sorry for my bad English, I'm from Mexico and does not concern me much English but hey, get to the point, a month ago that I enjoy my VCI-100 SE, with the mapping used it had a 3.3 and another problem in the software but not in my driver, yesterday installed the mapping 3.5 and there was a problem with my controller, located on the left button does not turn blue slice to juggle 1-4 or 5-8 Is it software problem or My driver, perhaps it will have melted the blue LED?
Reply With Quote
Jodi Lacerra
14.07.2010
Originally Posted by calvin01
@flashflooder...........i'm guessing this would be alot of work but is there a reason for efx 3 and 4 to be the slicer and echo instead of them being 1 and 2.i say this because if they were at the start of the chain then when using the sampler it would be possible to add efx to the sampled sound.i cant find an effect matrix in the options so im guessing it only works as a chain from effect 1 through to 4?.
first of all, you are correct in that the order of the FX Banks matters and they do work as a chain from 1 to 4 (not all simultaneously) so the slicer effect that is used for the sampler only hears the output from the decks that fx bank 3 is activated on and any effects from fx banks 1 and 2.

it would be nice to be able to sample the echo delay and even another slicer effect if you flipped fx banks 1/2 & 3/4 but the main reason they were designed in that order is to allow for easy sampling of fader fx mode and use of the effects control section.

However, what I've done to sometimes go around this is to use the Control FX section and switch FX Banks 1/2 to an Advanced effect (since they're usually in chained mode) and then to a Slicer or Delay and then just control those effects with the knobs and buttons below. it's a little more of a process, but at least you can do it if you really need a sample with one of those effects.

Also, you are right that with the sampler set up on fx bank 3, you only have one fx bank to use on it and there are no controls on the vci for fx bank 4 besides the echo delay. I'm trying to believe of a clean way to get around this but for now you would just have to change FX bank 4 manually.
Leeanna Ayla
10.07.2010
Originally Posted by mr.raw
bit pointless making a quick brower for new tsi if you can only use it on one crate.
I count 12 crates in the favorites section.
Leeanna Ayla
10.07.2010
Originally Posted by mr.raw
Guys how to i move crates using the vci itself?it moves up and down and loads deck a or b, but how do i move to another crate with just using the vci?is it on this tsi?or is it mouse only?
If you hold shift before pressing the list buttons in the latest mapping you can scroll through your favorites crates. After your on the crate you want just press list up or down and you'll be able to scroll through that crate. As far as I know there's no way to scroll through the tree on the left.
Vernon Vanderberg
09.07.2010
Originally Posted by mr.raw
Guys how to i move crates using the vci itself?it moves up and down and loads deck a or b, but how do i move to another crate with just using the vci?is it on this tsi?or is it mouse only?
Shift+Browse up or down will scroll through your crates
Leeanna Ayla
05.08.2010
Originally Posted by macrylinda1
Hi guys.
First of all sorry for my bad English, I'm from Mexico and does not concern me much English but hey, get to the point, a month ago that I enjoy my VCI-100 SE, with the mapping used it had a 3.3 and another problem in the software but not in my driver, yesterday installed the mapping 3.5 and there was a problem with my controller, located on the left button does not turn blue slice to juggle 1-4 or 5-8 Is it software problem or My driver, perhaps it will have melted the blue LED?
Reply With Quote
Sometimes it takes loading the tsi a few times to work correctly. There's also a glitch fix file in the zip file you downloaded. That reduces the number of midi messages going out and some PC's need that to work correctly.
Bobbi Westergren
05.08.2010
Originally Posted by papachilla
Thanks for the release guys, will let you know if I run in to any bugs! Also, the mailers you guys have been sending out are great!
Hi guys.
First of all sorry for my bad English, I'm from Mexico and does not concern me much English but hey, get to the point, a month ago that I enjoy my VCI-100 SE, with the mapping used it had a 3.3 and another problem in the software but not in my driver, yesterday installed the mapping 3.5 and there was a problem with my controller, located on the left button does not turn blue slice to juggle 1-4 or 5-8 Is it software problem or My driver, perhaps it will have melted the blue LED?
Reply With Quote
Jodi Lacerra
14.07.2010		The long awaited update to this mapping (v3_5_2) has finally made it online including a comprehensive 8 page walkthrough document now!

Check it out here http://www.djranking s.com/community /showthread.php?t=15916 and feel free to make any comments.

It's not going to go fully public onto the "Mappings" tab of the site for a few days so please let me know if you have any issues with it so I can fix them asap! Thanks!
Jolyn Brunello
14.07.2010		im happy to work around it as i reckon if i had to effect a certain sample it would be a better tool if i can master the advanced effect knob twiddling.a little tip i found that you probably already know that when in fader fx mode i assign the route fx to whichever deck is fader fx and use the knob instead of the pitch fader to shorten/lengthen the beatmasher,it works a treat and feels quite musical if you play with it.

thanx for the explaination.


also i dont believe i'll want to repace efx 3 and 4 for a long time,they just seem right so thumbs up.i wouldn't mind being able to select echo rate by hotkeys though.im sure its probably bread and butter but im fairly new to all this.i'll get round to it when i've worked out how to arrange itunes:eek:
Jodi Lacerra
14.07.2010
Originally Posted by calvin01
@flashflooder...........i'm guessing this would be alot of work but is there a reason for efx 3 and 4 to be the slicer and echo instead of them being 1 and 2.i say this because if they were at the start of the chain then when using the sampler it would be possible to add efx to the sampled sound.i cant find an effect matrix in the options so im guessing it only works as a chain from effect 1 through to 4?.
first of all, you are correct in that the order of the FX Banks matters and they do work as a chain from 1 to 4 (not all simultaneously) so the slicer effect that is used for the sampler only hears the output from the decks that fx bank 3 is activated on and any effects from fx banks 1 and 2.

it would be nice to be able to sample the echo delay and even another slicer effect if you flipped fx banks 1/2 & 3/4 but the main reason they were designed in that order is to allow for easy sampling of fader fx mode and use of the effects control section.

However, what I've done to sometimes go around this is to use the Control FX section and switch FX Banks 1/2 to an Advanced effect (since they're usually in chained mode) and then to a Slicer or Delay and then just control those effects with the knobs and buttons below. it's a little more of a process, but at least you can do it if you really need a sample with one of those effects.

Also, you are right that with the sampler set up on fx bank 3, you only have one fx bank to use on it and there are no controls on the vci for fx bank 4 besides the echo delay. I'm trying to believe of a clean way to get around this but for now you would just have to change FX bank 4 manually.
Jolyn Brunello
12.07.2010		@flashflooder...........i'm guessing this would be alot of work but is there a reason for efx 3 and 4 to be the slicer and echo instead of them being 1 and 2.i say this because if they were at the start of the chain then when using the sampler it would be possible to add efx to the sampled sound.i cant find an effect matrix in the options so im guessing it only works as a chain from effect 1 through to 4?.
Mariah Itter
10.07.2010		Indeed, point being it dont work how it should, what cant we scroll the left hand side?i use itunes and serato crates so it hard to use the 12 fav's.
Leeanna Ayla
10.07.2010
Originally Posted by mr.raw
bit pointless making a quick brower for new tsi if you can only use it on one crate.
I count 12 crates in the favorites section.
Mariah Itter
10.07.2010		That only works on the fav crates and not as you say on the left hand side tree where all crates are stored, bit pointless making a quick brower for new tsi if you can only use it on one crate.

I have been messing around on the new tsi for a day or so and i am finding it very buggy and unstable

Crashes on fx's like delay when using them or when i switch efx.
Leeanna Ayla
10.07.2010
Originally Posted by mr.raw
Guys how to i move crates using the vci itself?it moves up and down and loads deck a or b, but how do i move to another crate with just using the vci?is it on this tsi?or is it mouse only?
If you hold shift before pressing the list buttons in the latest mapping you can scroll through your favorites crates. After your on the crate you want just press list up or down and you'll be able to scroll through that crate. As far as I know there's no way to scroll through the tree on the left.
Mariah Itter
10.07.2010		Smoosh if you had used the latest mapping then you might know that if you push the shift button then it exits the crates view.
Vernon Vanderberg
09.07.2010
Originally Posted by mr.raw
Guys how to i move crates using the vci itself?it moves up and down and loads deck a or b, but how do i move to another crate with just using the vci?is it on this tsi?or is it mouse only?
Shift+Browse up or down will scroll through your crates
Mariah Itter
10.07.2010		Guys how to i move crates using the vci itself?it moves up and down and loads deck a or b, but how do i move to another crate with just using the vci?is it on this tsi?or is it mouse only?
Bobbi Kilde
09.07.2010		I have next problem...if i load maping which came with traktor 1.2.4 pro
skretch works great
When i load VCI-100 Mapping (3_5_1) then i have some kind of ramp up issue something like that...i skretch and when i reliese jog wheel it almost stops and after that start to play...very annoying....
Can anyone hp or explain why is that ?
Jolyn Brunello
08.07.2010		i believe it could be down to timing mate.i was having the same problem.check out video part 1 at about 5 minutes in and ean shows you how its done.its just crucial that you hit the record at the right time and get it right.

http://www.djranking s.com/2010/02/1...ing-tutorials/
Elida Ekenstam
08.07.2010		i'm having problems with my sampler

i press the sampler button
i press the blinking headphone button

traktor records a sample but it always leaves out 1 beat/count or half a beat/count

when the sample starts to loop it sound messed up

anybody experiencing this


using
macbook latest osx
vci 100 arcade
NI audio 2
latest traktor
Leeanna Ayla
07.07.2010		Yeah sync is on when it happens to me to.
Jolyn Brunello
07.07.2010
Originally Posted by flashflooder
Has anyone had problems with the pitch fader unexpectedly jumping the tempo a good amount of bpm's when you just nudged it a bit?

I've had it happen a few times and it sounds horrible. I know of a few others who have experienced the issue but I haven't personally encountered it enough times to drill down what the symptoms/cause of this might be. It seemed like it happened when I was near the center tempo fader position but that could've been coincidence. I haven't really seen it brought it up in this thread which makes me believe it's not too rampant of an issue but I still want to get it sorted out.

Please let me know if you have experienced this bug and if you found any pattern as to when it occurs. Thanks!
+1 but only when using sync.thought we had to accept it like the not so great fine pitch adjustment.

probably not but maybe shift/reset pitch after every track?.does it always jump the same value of pitch?.i'll look out for patterns now i know theres pontetial for a fix
Jolyn Brunello
07.07.2010
Originally Posted by flashflooder
The echo/pitch fader concern/bug is very valid and one that I have run into a lot myself. That being said, it will definitely be fixed on the next VC1-100 tsi release update.

As for the sampler pitch shifting, I have noticed this a few times as well. I haven't properly investigated it, but I believe the issue is that the Traktor clock will sometimes jump around a bit when it's on Auto. So if you set your sample and then play a song at a different tempo the clock will gradually move from one tempo to the other instead of jumping instantly to the new tempo and since the Slicer (the Sampler fx used) is tempo sensitive it tries to adapt which makes it sound pitch warped. At least, that's what I believe is happening. I could be wrong though. It wouldn't be the first time.
great news about the echo/pitch being sorted. the sampler theory makes sense.and if its correct its not a fault of comp/hardware its the user (me)

thanx
Corine Kasman
07.07.2010
Originally Posted by mslangen
Hi Guys,

Is there a possibility to use the standard pitch fader setting with the 3.5.1 mapping?
After importing the customized mapping the distance of the faders became to short for me to work with.

Thanks,

Michel
Just go back one page in this thread, I explain how to do it (should be the first post). How much % do you want?

Phil.
Tomasa Eltz
07.07.2010		Hi Guys,

Is there a possibility to use the standard pitch fader setting with the 3.5.1 mapping?
After importing the customized mapping the distance of the faders became to short for me to work with.

Thanks,

Michel
Takisha Hodulik
06.07.2010
Originally Posted by flashflooder
Has anyone had problems with the pitch fader unexpectedly jumping the tempo a good amount of bpm's when you just nudged it a bit?

I've had it happen a few times and it sounds horrible. I know of a few others who have experienced the issue but I haven't personally encountered it enough times to drill down what the symptoms/cause of this might be. It seemed like it happened when I was near the center tempo fader position but that could've been coincidence. I haven't really seen it brought it up in this thread which makes me believe it's not too rampant of an issue but I still want to get it sorted out.

Please let me know if you have experienced this bug and if you found any pattern as to when it occurs. Thanks!
yes

for the most part i start at one bpm and sync all my tracks to that bpm, but when i DO use the pitch bend (which in my case is always in the middle position, it ALWAYS jumps all the way.

-Gianmarco
Leeanna Ayla
06.07.2010
Originally Posted by flashflooder
Has anyone had problems with the pitch fader unexpectedly jumping the tempo a good amount of bpm's when you just nudged it a bit?

Thanks!
I have just recently. I changed the percentage in the mapping so I was believeing it had something to with that, but I wasn't sure. Every time it's happened to me it's been from the center position. I believe going either direction. VCI-100, MBP 10.6, 1.3 FW, TP 1.2.6, using the latest mapping.
Jodi Lacerra
06.07.2010		Has anyone had problems with the pitch fader unexpectedly jumping the tempo a good amount of bpm's when you just nudged it a bit?

I've had it happen a few times and it sounds horrible. I know of a few others who have experienced the issue but I haven't personally encountered it enough times to drill down what the symptoms/cause of this might be. It seemed like it happened when I was near the center tempo fader position but that could've been coincidence. I haven't really seen it brought it up in this thread which makes me believe it's not too rampant of an issue but I still want to get it sorted out.

Please let me know if you have experienced this bug and if you found any pattern as to when it occurs. Thanks!
Jodi Lacerra
06.07.2010
Originally Posted by calvin01
@flashflooder,
the only problem for me is when using the echo,i then hit play on another deck but cannot use the pitch fader until i release the echo button.its normally spur of the moment as im scrolling through the library i will see a track load it in then hit the echo and play and then have evening mare 30 seconds deciding if i should release the echo button and pitch up or down or ride it out.

for anyone,the sampler-i dont really use but i was playing the other day and was tapping away at the arcade buttons,it sounded alright so i thought id use the sampler.as soon as i started recording, the pitch was sounding weird and it although i didn't have quant or snap selected it sounded like traktor still was quantizing?im using the latest version.is it the master clock settings?
The echo/pitch fader concern/bug is very valid and one that I have run into a lot myself. That being said, it will definitely be fixed on the next VC1-100 tsi release update.

As for the sampler pitch shifting, I have noticed this a few times as well. I haven't properly investigated it, but I believe the issue is that the Traktor clock will sometimes jump around a bit when it's on Auto. So if you set your sample and then play a song at a different tempo the clock will gradually move from one tempo to the other instead of jumping instantly to the new tempo and since the Slicer (the Sampler fx used) is tempo sensitive it tries to adapt which makes it sound pitch warped. At least, that's what I believe is happening. I could be wrong though. It wouldn't be the first time.
Shaquana Wesselhoff
05.07.2010		thats a pretty good sum up dros thnks for the info, it just makes me wonder if the DJTT folks might work their mojo on the vci 100 board, I cant see anything of the vci 100 calibre coming out these days... it would be damn amazing to see the usb3 and/or light peak expansion on one, the possibilities are amazing! Anyway I've derailed the topic enough mebelieves great info there though
Dj Tykarma
03.07.2010		USB3 will also bring chaining capability, like with FireWire, you'll be able to connect devices in chain. It means that with two USB ports as we have on Macs, you'll be able to connect dozens of controllers and sound cards without having to use a USB hub.

Though USB3 could be quickly replaced by Light Peak technology which is even faster but doesn't come before early 2011.

I guess these technologies will also help getting rid of bandwidth issues and LED glitches on controllers. But it will require new hardware so it might not be for the VCI-100, maybe its successor.
Shaquana Wesselhoff
02.07.2010		I got a pretty importnqat question here concerning the VCI 100, though please bear with me if it sounds stupid, i'm still learning a lot of things and have a ways to go before my first mac (17" MB Pro probably) i have heard loads about the new upcoming usb 3.0 and was wondering two things, 1. Should i get a Macbook Pro now, or wait until theyre equipped with USB 3.0? 2 what are the possiblitlies of outfitting the VCI 100SE with a USB 3.0 port, it would most likely turn it into a masterpiece due to massively increased bandwidth, so all these little glitches would probably bugger off and maybe it will open the door to hi rez midi signal for pitch faders and jogwheels? might be a bit off topic here but i feel its connected to solving hell of a lot of the issues with the mapping on Windows based machines....
Corine Kasman
01.07.2010
Originally Posted by [email protected]
can anyone tell me how to adjust left / right output levels in traktor pro as right is higher than left side is anyone else having this problem

celebrity t
There is a PAN knob in the mixer section for each deck, make sure one or more are not tweaked.

Phil.
Quiana Mahnken
01.07.2010		can anyone tell me how to adjust left / right output levels in traktor pro as right is higher than left side is anyone else having this problem

celebrity t
Jolyn Brunello
26.06.2010		@flashflooder,
the only problem for me is when using the echo,i then hit play on another deck but cannot use the pitch fader until i release the echo button.its normally spur of the moment as im scrolling through the library i will see a track load it in then hit the echo and play and then have evening mare 30 seconds deciding if i should release the echo button and pitch up or down or ride it out.

for anyone,the sampler-i dont really use but i was playing the other day and was tapping away at the arcade buttons,it sounded alright so i thought id use the sampler.as soon as i started recording, the pitch was sounding weird and it although i didn't have quant or snap selected it sounded like traktor still was quantizing?im using the latest version.is it the master clock settings?
Kelsey Maylone
26.06.2010
Originally Posted by flashflooder
There isn't a firm date set for this update yet, but I would anticipate it hopefully being sometime in the upcoming month. To be honest, our attention is mainly focused on midi fighters and a few other projects at the moment but I promise that the update will happen.

Also, if there any bugs or changes that you feel should be made that haven't been addressed yet in this thread, please let me know and I will add it to the list.
The only thing which i don't really like is the fx unit selector.It's many times where i have to try first if i did the right selection because in the dark i can't understand which led is on(up middle down).
Corine Kasman
27.06.2010		You can't change the individual Pitch settings in Transport (that's why they are greyed out a bit), you can change all of them by choosing one of the ranges above each deck's box. That way you globally change all the ranges.

One side note, once during a mix, one of my pitch faders would only give me about 2.5% adjustment. I went into Preferences, Transport and only that deck had changed to 16% while the other three stayed at 50%. I just clicked one of the settings and it went back, but it was weird.

Phil.
Jason Schmock
26.06.2010		Yeah It says pitch range is set to 8% for each deck in transport, and it won't let me click a different value. I'm just wondering how I change this, In case I wanted to.

<< Back to DJ TechTools' VCI-100 FAQReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy