Download the Latest VCI-100 Mapping (3_5_1)
Download the Latest VCI-100 Mapping (3_5_1) The following changes have been made to this file:
Download the File here Requirements You must have Traktor 1.24 or later to use this file otherwise it will not import properly. To Load this file
What Settings to Load • MIDI: Everyone • EFFECTS: Everyone (please load this file twice if you are using it for the first time to load the FX properly) • LAYOUT: Only if you want the layout to change when switching decks from A/B to C/D. To customize your own, modify the layouts in position 1 and 3. • ALL OTHER SETTINGS: Import these if you want the Pitch fader to be set to 8%, and for deck copy to work perfectly. VIDEO TUTORIALS Part 1 Part 2 Purchase the matching overlays] Known Issues for VCI-100 owners with firmware Version 1.2 • The “D” button in the FX section will not work as indicated. • In Fader FX mode, the level fader's will not “freeze” effects as in version 1.3. • The Sync button for Decks A and C will not properly light up when synced. Having Problems with the FX Route Button? There is a file included that fixes this problem for windows users that are getting this glitch. The problem relates to Traktor's Midi engine and windows. To solve the problem we disabled the LED functions. You can use the FX route button to route the FX but the LEDs will not display. | |
| Corine Kasman 25.06.2010 |
Originally Posted by sirtofu
The way the TSI is set up, even though the Transport section's Pitch range says 50% it is the range assigned to the midi control that limits it to 8%. To see that, click Controller Manager in Preferences. Then select the VCI from the Device list. Now if you scroll through the mapping to the first instance of "Tempo" and click to highlight it, you will see in the lower part of the window, Rotary Sensitivity is set to 40%. You can change this to 100% and now the pitch fader will change the pitch 50% (if you still have it set to 50% in Transport). If you change the Rotary Sensitivity, you have to do it for all 4 of the "Tempo" in the mapping, as each one is for a different deck (A, B, C or D). Is that any less confusing (or is it worse)? Ask any part of the explanation you may not quite get and I'll try to explain better. Phil. |
| Jason Schmock 25.06.2010 | I saw some talk earlier in this thread of changing the pitch fader range, but it was a bit confusing the way it was worded. I imported all the.tsi settings and now the pitch range is locked at 8% in traktor. How do I modify this if I wanted to? |
| Jodi Lacerra 24.06.2010 |
Originally Posted by 1878blues
Also, if there any bugs or changes that you feel should be made that haven't been addressed yet in this thread, please let me know and I will add it to the list. |
| Bailey Fergurson 17.06.2010 | Any Ideas on a 3_5_2 TSI Mapping File release date, I feel there are a few bugs with the current TSI, and it would be better to address them sooner rather than later; If at all possible. Keep up the good work |
| Jodi Lacerra 14.06.2010 |
Originally Posted by monkey magic
|
| Jodi Lacerra 14.06.2010 |
Originally Posted by Fatlimey
As for the tsi asymmetry, it is all due to the firmware differences in the two Sync buttons (as I'm sure you are familiar). As you can see when the VCI-100 is plugged in but Traktor isn't open, the left sync button will toggle the led upon pressing it but the right sync does not. Dealing with this behavior resulted in the hold/toggle asymmetry for their Sync commands; however, Deck B has an LED output and a toggle command so the commands for A/C and B/D although different should be consistent. |
| Cornelia Gonzalez 11.06.2010 | Hey - I have a vci 100 firmware 1.3 just trying to load the 3 5 1 TSI file - everything loads except the actual mappings for the VCI100SE. The VCI100SE is added as a device but no buttons are assigned or listed for the device when selected. I have repeated the process but no luck. The device works and has been successfully updated to firmware 1.3. Does anyone have the TKS file (fx glitch fix) so that I can try and import that on its own? Could my version of Traktor Pro also be a problem? I am using Traktor Pro 1.2.1 Thanks for any ideas. |
| Sheri Garin 10.06.2010 | thank you so far, but I should have added that the fader is only controling the dry/wet volume of the specific effect unit. that means they are not controling the 2nd and 3rd effect in the chained effect mode as it sould in the tutorials. sorry for keeping that and thanks for the help. PS: it's a bit hard for me to upgrade firmware, because (as i already said) i live in germany and buying the upgrade kid from the USA and shipping it to germany would cost a lot of money. Can't afford that atm. |
| Jodi Lacerra 10.06.2010 |
Originally Posted by Attix
however, this functionality can be removed in the tsi such that the volume/level fader only controls the effect2 parameters and not the overall fx dry/wet. since multiple people have asked about this in the past i will just explain how make this change (in case anyone wants to do it). to remove this functionaltiy, you would need to go and edit the tsi via the controller manager, sort through comments, and delete the following lines:
|
| Leeanna Ayla 09.06.2010 | You need the 1.3 firmware to take full advantage of the latest TSI. |
| Sheri Garin 09.06.2010 | hey guys, I just got my vci-100 from a regular shop in my country (germany) and downloaded the tsi file from DJTT. I imported the file and it works quite good, BUT the volume faders in fader fx mode also controle the dry/wet volume as the jog wheel does. is it because i've got firmware 1.2 or because I missed this special part of installation in the last 2 hours I tried to fix it. And yeah I tried a lot of things. Thanks for help |
| Jodi Lacerra 07.06.2010 |
Originally Posted by r1chardell1s
|
| Kena Herko 01.06.2010 | is there anyway that when u hit Copy to Deck C or D that the fader for Deck A or B be reset to 0 and the EQ settings that the copied deck has (A or B) gets copied to C or D instantly too? I love this feature but the volume spike from usin it can be a pain in the arse. Other than that the mapping works like a dream for me. |
| Karl Forde 31.05.2010 | Hi Guys, Was wondering when the next mapping would be available which addresses some of the bugs of this one - sync button sticking is driving me crazy... |
| Leeanna Ayla 25.05.2010 | They're on the midi mappings page. http://www.djranking s.com/midi-map/ |
| Shaquana Wesselhoff 25.05.2010 | No but I found mine on the community s by going to the v2 mapping post and then hitting Ean's Link to the v3.4 |
| Rosaline Garel 25.05.2010 | Do you know where you can download old v3 mappings? |
| Shaquana Wesselhoff 24.05.2010 | Ok I dont know if this helps, but it looks like the 3.4 tsi (Glitch Fix) has no issues with the sync button, at least compared to the 3.5 I played around on 3-4 decks and it worked with few issues, turned off sync on play once or twice but, was fully responsive compared to 3.5, so I believe I'll stick to the old map until an update is available. BTW the shift button and the juggle buttons produce pops and clicks etc (raising latency helps but I need it low for other programs) its a Windows or Traktor Pro issue as far as i have understood since Mac users seem to have no problems, is there any remedy for it? |
| Shaquana Wesselhoff 24.05.2010 | I just noticed that the sides of the vci controller jogs actually control the pitch bend in both Slice and echo which is really frustrating as trhe unit doesnt always pick up on my pressing the top of the jog straight away thus often throwing the track out of sync when I make use of them any way to stop this from happening? Its actually more a hindrance than a boon in most cases, and also the sync button issue where you have to preess it repeatedly to get it to work... I dont remeber the 3.4 tsi having this problem going to try it out see if it occurs there too |
| Corine Kasman 24.05.2010 |
Originally Posted by photojojo
If you want the screen to show full stroke, change the Tempo resolution to 100% and then set the Pitch Range in Transport to 8%. Phil. |
| Leeanna Ayla 24.05.2010 |
Originally Posted by ivantodorov
Originally Posted by andreanegri
is there a reason to have it only move 20% or is it a bug that needs to be fixed? |
| Rosaline Garel 24.05.2010 | I solved changing from relative to direct in the controller manager |
| Tony Finkes 24.05.2010 | I saw a few people mentioned the issue with the VCI-100se mapping not showing full range of the pitch faders in Traktor Pro. When I move the pitch fader all the way up, it only moves 20% up in Traktor, same for down as well. Any ideas how to correct/fix this? |
| robert chanda 21.05.2010 | Been chasing down some strange behaviors when a VCI100 isn't attached. Sync on deck B flickers off a moment after being activated, the same happens with Loop Active on deck B. Looking at the TSI, it seems the "Sync" commands are well formed for decks A and C using a Hold command, while decks B and D have Toggle events, deck B only has one entry and deck D has a Toggle and an output event. It just seems asymmetrical. Are these correct? |
| Rosaline Garel 21.05.2010 | I would say, we cannot use effects 3 & 4... |
| Ester Dolbin 21.05.2010 |
Originally Posted by CodeMorse
Other than that I have to mention that this new mapping RULES!!!! I was definitely frustrated by the lack of access to multiple effects knobs, and I believe the 4 efx unit aspect of 1.2x is also a big improvement. But overall I love this new mapping, I believe it's incredible, you've outdone yourselves. the only thing I find a little hard to deal with is the EFX routing concept. I believe with practice I'll get used to it, but I kind of preferred the dedicated on/off buttons from the old layout. I don't really change my efx types that much so this feature isn't as useful to me. I'm still believeing about getting an X1 so I can just not have to toggle between banks. Also question: how do I assign (using the mapping) knobs to efx unit 4? 3 is taken care of as the permanent sampler beat slicer. That is, I can toggle between efx 1 & 2, but there appears to be no way to access efx unit 4. do i need to do a customization? if so, i'd like to change the 3rd choice of the FX bank button to be unit 4 (instead of loops, i never use that function). |
| Shaquana Wesselhoff 20.05.2010 |
Originally Posted by ridim
your fader woes had me a bit worried at one point, turns out i was being a bit careless about fader position between decks A and C |
| Elida Ekenstam 20.05.2010 |
Originally Posted by ridim
Took the vci apart and drenched my fader in isopropanol and it now works like a charm btw going to play my first gig witch the vci tomorrow |
| Madlyn Trocino 19.05.2010 | thanks photojojo, I must have watched this video 100 times in the last two days. I grew tired of my VCI years ago, and have bought and used just about every midi controller under the sun. With all the change I always held a special place in my mind for the VCI and never really felt as comfortable on any other unit. Now with firmware 1.3 and DJTT's TP .tsi for the VCI, I am in shock of how fun and amazing it is. I caused me to fall in love with the VCI all over again again. This TSI is truely brilliant and somehow is easier to use then any 4 channel "layered" controller to date. MAN ITS SOOOOO MUCH FUN.... |
| Leeanna Ayla 19.05.2010 | I believe it works in the video because he's still in the loop. If you deactivate and get out of the loop you'll have to start a new loop or if the loop's stored you can hit the cue point it's assigned to go back to that and re-activate it then...I believe. |
| Madlyn Trocino 19.05.2010 | Just added lastest firmware (and lastest everything) and im at the beginning stages of learning. I cant seem to duplicate the loop behaviar in video part 1 (at 2:25) , while pressing shift I cant re-active the prior loop. What am I doing wrong? |
| Elnora Wisegarver 17.05.2010 | not to sound stupid .Just got my first mac how do you import tsi files for vci to work |
| Dee Atondo 15.05.2010 | I have noticed a bug where if one selects FX Type it turns on the effect automatically? Any body have problems with "FX Type"? |
| Shaquana Wesselhoff 14.05.2010 |
Originally Posted by flashflooder
I've tried working under all the settings (manual, auto etc) no change except the obvious (have to set the master in manual) but yeah all in all mousework on sync works better than the button itself. its a real pain cos I'm trying to get a mix done where i use all four decks almost constantly, and one track out of sync buggers the whole set, sync wont stay pressed |
| Elnora Wisegarver 13.05.2010 |
Originally Posted by flashflooder
|
| Jodi Lacerra 13.05.2010 |
Originally Posted by CodeMorse
Sync can sometimes act up a bit but it's always good to identify if has to do with the tsi or something else in Traktor like the song's beatgrid or whatever else. |
| Scarlett Saupp 13.05.2010 |
Originally Posted by flashflooder
|
| Jodi Lacerra 13.05.2010 |
Originally Posted by minimal
|
| Suzanna Paddock 11.05.2010 | Can one of the modders tell me if this is possible please: -reverse the order of LEDS that are green/orange when in juggle 1-4/5-6 (ie orange-green-orange-green for 1-4 and green-orange.. for 5-6). That will gives me one more visual cue not to f*k up live. Can't seem to find it in the mappings. Cheers |
| Elida Ekenstam 11.05.2010 | played around with it for about 2hrs.. going crazy on the juggler and fader FX.. seems to work well 1 issue after heavy usage the volume slider for deck A started acting weird. When i pulled it up to max volume it would jump down to zero and start to fluctuate at the bottom. macbook traktor 1.24 vci 100 arcade 3.5.1 |
<< Back to DJ TechTools' VCI-100 FAQReply