Denon MC3000 custom mapping available

Home :: Post and find Controller Mappings :: Denon MC3000 custom mapping availableReply
Denon MC3000 custom mapping available
Posted on: 18.09.2012 by James Beling
I've just remapped the MC3000 for Traktor Pro 2.5.1 and it's available here:

http://maps.djranking s.com/mappings/741

Mapping features:

- 4 fx units including fx assign, mode select and effect type.
- 4 smart knobs per deck.
- 2 banks of smart buttons for beat mashing per deck.
- Hotcues in play or stutter mode.
- Remix slot parameters.
- Beatgridding tools.
- Browsing controls.
- Snap, Quantize, Record and Crossfader controls.
- Layout and resizing options.
- Good LED feedback.
- Disco mode!!

There are several banks of fx and button mashing controls that haven't been assigned yet. I'm hoping other users might get involved in developing and improving the mapping by adding further effects and features.

Alane Disalvatore
28.04.2013
Originally Posted by Raycotek
Hi - Thanks for the feedback! "Shift + Pitchbend +/-" works relative to the length of the track, so it doesn't reference beats and bars. In my mapping it's set to default which means it'll jump forward/back in jumps of roughly 6% (of the overall length of the track). I believe the feature you need is BeatJump. It's included in my mapping, but you might need to set it up. Go to Preferences>Decks Layout>Deck Layout and set Size A & B to Advanced. Close Preferences, and on the Advanced Tab of your tracks, select Move (it's above Cue and Grid). To the right, there's a dropdown box - select BeatJump. To the right you can set the Beatjump value. If you set it to "Loop" then the current loop length will set the amount. To trigger BeatJump, press "Shift + Loop +/-".
That's fantastic, thank you very much. I would've never figured that out. Looks like I can use your mapping permanently now.
Alane Disalvatore
28.04.2013
Originally Posted by Raycotek
Hi - Thanks for the feedback! "Shift + Pitchbend +/-" works relative to the length of the track, so it doesn't reference beats and bars. In my mapping it's set to default which means it'll jump forward/back in jumps of roughly 6% (of the overall length of the track). I believe the feature you need is BeatJump. It's included in my mapping, but you might need to set it up. Go to Preferences>Decks Layout>Deck Layout and set Size A & B to Advanced. Close Preferences, and on the Advanced Tab of your tracks, select Move (it's above Cue and Grid). To the right, there's a dropdown box - select BeatJump. To the right you can set the Beatjump value. If you set it to "Loop" then the current loop length will set the amount. To trigger BeatJump, press "Shift + Loop +/-".
That's fantastic, thank you very much. I would've never figured that out. Looks like I can use your mapping permanently now.
James Beling
27.04.2013		Hi - Thanks for the feedback! "Shift + Pitchbend +/-" works relative to the length of the track, so it doesn't reference beats and bars. In my mapping it's set to default which means it'll jump forward/back in jumps of roughly 6% (of the overall length of the track). I believe the feature you need is BeatJump. It's included in my mapping, but you might need to set it up. Go to Preferences>Decks Layout>Deck Layout and set Size A & B to Advanced. Close Preferences, and on the Advanced Tab of your tracks, select Move (it's above Cue and Grid). To the right, there's a dropdown box - select BeatJump. To the right you can set the Beatjump value. If you set it to "Loop" then the current loop length will set the amount. To trigger BeatJump, press "Shift + Loop +/-".
Alane Disalvatore
26.04.2013		I'm not sure if this is a bug or simply user error because I only got my mc3000 last week but I've noticed that with the normal mapping I can move 32 beats by pressing shift and + or -. Whereas if I try moving through the track with your mapping (by pressing shift and the pitch bend buttons instead of the loop buttons?) I move forward by about 31.25 beats instead.

I use this feature quite a lot when I'm preparing tracks so I find it quite useful and just wondered if you had any idea why it's doing this. I've tried reinstalling traktor etc already.

Thanks for the great mapping file as well. Your videos were basically the reason I bought the mc3000.
James Beling
17.04.2013		I've uploaded a Beta release of v.0.3.0 - here are the main new features:

* Macro FX have been removed from the Smart Knobs and replaced with Smart FX.
* 16 x custom Smart FX per deck.
* 4 x custom Smart Button banks for beatmashing per deck.
* FX Units, Smart FX and Smart Buttons now available on Decks C & D.
* Reverse Play effect.
* Delay Freeze buttons with speed options.
* Turntable Freeze effect buttons with speed options.
* Transpose Freeze effect buttons with speed options.
* Jump to track start.

Get it here: https://maps.djranking s.com/mappings/741
James Beling
11.04.2013		Cheers Stewe! When it's all finished I'll stick a few ideas in the Ultimate FX thread.
Kellie Myrum
11.04.2013		Well done! That Transpose sweeps sounded sick!!
James Beling
11.04.2013		A new version of this mapping will be available in the next couple of weeks. It's version 0.3.0 and includes lots more custom fx. Check out the video:


Sima Florczyk
05.04.2013		Hey guys, I am new to the community and to dj'ng in general. I recently purchased the Denon mc3000 after my entry controller failed. I was trying to get the mc3000 to work with Traktor and have downloaded several mappings (some from traktor bible, some from various other places). I have been able to import them and for the most part they will work just fine with the controller. However, every mapper I have downloaded has not been able to make the FX knobs to work in Traktor. Does anyone have a suggestion as to what I may be doing wrong?
Gaynell Rydberg
05.04.2013		Just kidding! Got it to work! Had to press the sample button.
Gaynell Rydberg
05.04.2013		Hey Racotek, could I get some help?

For some reason none of my FX knobs work. I have the normal TSI imported.
James Beling
08.02.2013		Yeah I've been meaning to get on that. Coming soon...
Kellie Myrum
08.02.2013		Hey Raycotek, if you got some good FX combos and you don't mind sharing it please use this thread to post them

http://community .djranking s.com/showthread.php?t=63445

Thanks!
James Beling
08.02.2013		Assign decks by selecting A,B,C or D in the grid either side of the crossfader in Traktor.
Vickey Fuchigami
08.02.2013		how do i make the crossfader control deck c and d? right now deck c and d just play can't adjust
James Beling
28.01.2013
Originally Posted by stevebg
when you 1st load your track you get all 4 cues lit up i just get cue 1 , same on both decks
Is it possible that you've only added 1 hotcue to the track? If you've already added 4 hotcues to the track, you should get 4 lights.

Originally Posted by stevebg
i cant get both wet/dry dieals in traktor to operate from 1 knob ,, just daft little things
This should be possible by holding down shift while turning dry/wet.
Tana Noye
28.01.2013
Originally Posted by Raycotek
Open Traktor, go to preferences and hit the import button at the bottom of the screen
managed to get your settings imported but certains things are different from what happens in your videos ,,
for instance when you 1st load your track you get all 4 cues lit up i just get cue 1 , same on both decks ,, also i cant get both wet/dry dieals in traktor to operate from 1 knob ,, just daft little things
Tana Noye
28.01.2013
Originally Posted by Raycotek
Open Traktor, go to preferences and hit the import button at the bottom of the screen
tried it again mate just exactly the same ,, same warning again
James Beling
28.01.2013		Open Traktor, go to preferences and hit the import button at the bottom of the screen
Tana Noye
28.01.2013		ive downloaded the tsi file but when i click on it from the folder to import traktor puts a warning up across the bottom saying error while parsing settings file on import ?? any ideas
Tana Noye
28.01.2013
Originally Posted by Raycotek
Yes they're loaded, although Smart Buttons banks 2-4 are still empty. Check my YouTube channel in a couple of weeks because I'm planning to do a vid on how to map your own effects to the empty banks.
ah great ,, im not sure ill ever get my head round operating the denon lol , i left u a visitor message
James Beling
28.01.2013		Yes they're loaded, although Smart Buttons banks 2-4 are still empty. Check my YouTube channel in a couple of weeks because I'm planning to do a vid on how to map your own effects to the empty banks.
Tana Noye
28.01.2013
Originally Posted by Raycotek
The mapping has been updated for Traktor Pro version 2.6 - Macro FX and Flux mode controls added.

It's available here: https://maps.djranking s.com/mappings/741
hi ,will this version come with smart buttons / macro fx banks loaded allready , just i noticed you made a builder mapping but to be honest if i down loaded that i wouldnt have clue how to set up the banks ,, im just looking for the link for the mapping you posted on youtube
James Beling
25.01.2013		There's a row of 4 small circular grey buttons in the center of the controller. EFX is 2nd from the right between SAMPLE and RECORD.

FX ON 1 & 2 are the small white square buttons in a row between the high EQ knobs. There are 2 for each deck, and they are labelled 1 and 2. Normally they are used for assigning FX units to the decks.
Vickey Fuchigami
25.01.2013		This is gonna be a really dumb question.... running traktor 2.6 with the mc3000 and reading the instruction I need to press EFX + FX on 1 to reset FX unit but I cannot find these two buttons? The EFX button is suppose to be use for other things too like Flux mode, where is it?
James Beling
25.11.2012		I got the idea of a Builder mapping from one of Scamo's posts, so I've added it to this mapping. The Builder is basically the same mapping but the Macro/Smart FX banks and the Smart Buttons banks are empty. Should be easier to personalize now:

https://maps.djranking s.com/mappings/741
James Beling
02.11.2012		The mapping has been updated for Traktor Pro version 2.6 - Macro FX and Flux mode controls added.

It's available here: https://maps.djranking s.com/mappings/741
James Beling
24.10.2012		I used Camtasia Studio 8 on a 30 day free trial. But 30 days is over now, so no more videos...
Kellie Myrum
24.10.2012		Hey Raycotek,

Which software do you use for video editing?
James Beling
18.10.2012		More vid... PLAY MODE contains a few extra features, like Beat Grid Tools, so you don't need to use your laptop. Plus I've re-mapped the volume meter LEDs to give a cleaner output.

James Beling
18.10.2012		Ha! Ok. I've been working on another vid so I haven't managed/had time to figure this out yet, but in the process I've thought of a few other ideas for fx mapping that I'm gonna build into the next version of this mapping. Thanks for the ideas!
Kellie Myrum
04.10.2012
Originally Posted by Raycotek
Now I get it!!!! So for example, I could add a second smart fx to each knob, right? Just map the dry/wet for each effect in opposite directions so they both reach zero in the middle at the point the midi value changes, and you can go smoothly from one effect to the other. That's a great idea - thanks!
Hey Ray, that's not what I meant. In fact that can't be practical because ether way one of smart knob commands always stays on. That's why I use modifiers, to control when is every effect switching on/off.
James Beling
03.10.2012
Originally Posted by Stewe
other modifier that must be mapped inverted in regard to first one.
Now I get it!!!! So for example, I could add a second smart fx to each knob, right? Just map the dry/wet for each effect in opposite directions so they both reach zero in the middle at the point the midi value changes, and you can go smoothly from one effect to the other. That's a great idea - thanks!
James Beling
03.10.2012		Thanks I noticed a couple of other mappings for SC2000 over at Traktor Bible. Don't know how good they are though.
Kellie Myrum
03.10.2012		You did a good thing, Super knob is a bit more smart. How I managed to have it on my bcd is by using one or two modifiers regard to how much control do I need and that's only the base. From there I can give on/off modifier condition to other fader FX for example.

Half of the knob is M1=0 and from middle and to end of second half of knob is M1=7. That gives you two different modifier conditions to combine with commands you wanna map to that knob in effective way.

Modifier value goes to 7 exactly in the center decent so that means you don't have off state in one direction but in other have - M1=0. Here comes other modifier that must be mapped inverted in regard to first one.
Isa Erik
03.10.2012		Man i wish someone made such awesome mapping for the Denon's sc2000
looks great raycotek
James Beling
03.10.2012		Yeah I believe that's the button on the hardware that changes the midi note value. Genius idea from Denon. By the way did you notice I changed the name from Super to Smart?
Kellie Myrum
03.10.2012		You got the grid toggling modifier. Nice
James Beling
03.10.2012		Vid of Smart FX and Smart Buttons:

James Beling
28.09.2012		Video of some of the mapping features:


<< Back to Post and find Controller MappingsReply
  • Page:
  • 1
  • 2
  • >>
  • Total: 53

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy