DJ TechTools' VCI-100 FAQ
Home :: DJ TechTools' VCI-100 FAQAdd new thread
| Threads | Posts | Last post |
| 22.09.2010 Breadboarding my own firmware kit | 2 | 22.09.2010 |
| I am very interested in making my own firmware kit, since I am a student in computer engr. and also because I would like to do the fw 1.4 upgrade asap, (also too because 25 is a lot of money for a poor student and I have ready access too lots of circuitry and free supplies). I am having trouble… | ||
| 22.09.2010 VC1-100 Jog Wheel LEDs Midi Out | 0 | 22.09.2010 |
| Has anyone ever figured out if the LEDs under the VCI-100 jog wheels can be activated via a Midi Out command? I thought I saw someone do this a while ago but I can't find it. I also tried to figure this out using some midi monitoring software but had no luck either. | ||
| 22.09.2010 traktor midi set up problems | 0 | 22.09.2010 |
| HI i have version 1.25 of traktor pro and for some odd reason the tab that says (midi setup ) is not here and i need to know if i can scratch songs using a audio 2 sound card and my current version of traktor pro? | ||
| 20.09.2010 1.4 Firmware questions | 2 | 20.09.2010 |
| First off, thanks again to DaveX and the entire DJTT staff and community for not giving up on the vci-100. 1) Firmware 1.3 had a way to start it in 1.2, if I'm not mistaken, so will this one also have a secondary startup if you want to start with the older one (for whatever reason)? 2) Will… | ||
| 17.09.2010 vci-100 FX question | 3 | 20.09.2010 |
| Im now using DJTT's mapping for my vci-100. My firmware version is 1.2, not upgrade yet. When I tried to use jog wheel to control fx function, the pitch fader and jog wheel worked well but volumn fader cannot control the second FX or even the third.It has the same function as the pitch fader. Is… | ||
| 16.09.2010 I need same help for my vci 100 | 3 | 16.09.2010 |
| Hi guys My vci 100 is broken, the left fader volume doesn't work, i need another new fader, but in italy is impossible to found it. Can you help me? Thx gigi | ||
| 16.09.2010 Missing my Echo-effect | 2 | 16.09.2010 |
| Hi guys, As a newbie with my lovely VCI-100 SE I press, squeeze and push every button and knob to learn what they can do for me. Unfortunately I have managed to remove the Delay-FX from the 4th FX-deck when I push the ECHO-button. Instead it chooses FLN-F. How do I change it back? Thanks… | ||
| 10.09.2010 Vci-100 black plate | 8 | 15.09.2010 |
| My vci100 is silver version. Where can I get the black plate? DJTT only has the black overlay and knobs, there is no plate! | ||
| 13.09.2010 NIXING Fader FX in v3.5.2 .tsi (any help please) | 1 | 14.09.2010 |
| Hello all. yes I said nixing, not fixing. I don't use Fader FX. Don't see it happening in the future. Rarely use any effects aside from the Delay (ECHO button). I could believe of a better use for the SLICE button as well, but for now I'll stick to the Fader FX. Basically I would like to… | ||
| 14.09.2010 Invert scratch button led!! | 0 | 14.09.2010 |
| Can anyone tell me where in the controller manager is the output for the scratch button led as I want to invert the operation. This is because I have deleted the CDJ mode function of the jog wheels (don't use em) so I can use timecode vinyl and want to use the led to denote jogs off (timecode… | ||
| 13.09.2010 serial-serial cable question | 5 | 13.09.2010 |
| I want to upgrade my vci-100 by using the firmware kit. I have a serial to serial cable at home. But I can't find any serial cable in the back of my PC. How can I upgrade it? | ||
| 22.08.2010 left jog wheel | 4 | 12.09.2010 |
| hey yall. so i just bought a vci-100 slightly used and im trying to get started. my one problem is that my left jog wheel "tips" if i push on the top left part of it. this does not seem normal since the right does not do it i was wondering if anyone had tips for a newbie on how to fix or… | ||
| 10.09.2010 Traktor 1.2.4. and vci-100 mappings | 1 | 10.09.2010 |
| So I am planning on buying a vci 100 se sometime in the near future, but i was just wondering about mappings. currently i have traktor pro version 1.2.4. And im just wondering if the mappings will still work with this verson even though it is not the most up to date one. Thanks! | ||
| 09.09.2010 A few questions, rather easy for some of you, I bet | 12 | 09.09.2010 |
| Please bear with me, I understand that asking these question is the equivalent of asking some of you what 2+2 is. ***** I am using Traktor Pro 1.2.4 VCI-100SE Audio 2 DJ And I have not updated the mappings yet as I don't even know what "mappings" are/do My first problem is that I can… | ||
| 20.05.2010 Sampler Button... | 11 | 09.09.2010 |
| Hello, I picked have a brand new vci and the sampler button isn't working. I have loaded the tci file several times but the board just wont go into sample mode. Do I need to press a modifier key to get into sample mode? Any help would be much appreciated. Joe | ||
| 23.08.2010 Planning on buying a VCI-100se | 7 | 08.09.2010 |
| So I was looking at controllers recently and I stumbled upon the VCI-100se and I've decided that it was perhaps the best option for me as a beginner in the DJing art. Although,before making my purchase,I have a few questions regarding the VCI-100se which are the following : -Can I just plug… | ||
| 06.09.2010 Cue Button Problem on VCI-100 - Please assist | 7 | 08.09.2010 |
| Hi all, I have a problem with my Cue button on the right-side deck of my VCI-100SE. I noticed that I now have to press firmly to get a response from it. It no longer responds to light tapping. Could it be some type of loose wiring or connection? Any suggestions would help me out… | ||
| 04.09.2010 Can anyone help with my Glitch problem. | 2 | 07.09.2010 |
| I have just landed a two hour slot on a saturdy evening radio show (www.sirenonline.co.uk) which is great BUT everytime i am in the mix i get a glitch and it pis@#s me right off. Is there any way this can be cured. I am using a VCI 100 SE with Traktor Pro i have run the Glitch fix TSI file. I am… | ||
| 25.07.2010 Problems with CPU i7 - VCI 100 - Traktor Pro | 9 | 07.09.2010 |
| Hi, I need help. I got my new laptop Sony F12, where I got i7 CPU, 8 GB Ram and newest chipset PM 55 - 1333Mhz FSB. Everything goes fine except Traktor reacts on VCI sometimes late on commands-especially faders and sometimes doesnt at all - like platters. Please help, I do not really understand… | ||
| 05.09.2010 Ok now im confused! | 5 | 06.09.2010 |
| Ok whilst in the mix live on my radio show i had a glitch in my first mix. Sounded pretty bad on air just a guick mill-isecond freeze. Both tunes stayed in sync but through me on the mix. I recored this mix with the Traktor recorder and thought i would upload the snipit of the mix where the problem… | ||
| 05.09.2010 Slider / Delay Button - Change FX? | 0 | 05.09.2010 |
| hi! my mapping lost the fx slider / delay on the arcade buttons. wanted to change anyway to beatmasher. just couldnt find anywhere the right setting. also with the new mapping it didnt show up again, allthough on the first ones it does. any knowledge around would be helpful. best! s | ||
| 19.04.2010 Tutorial - VCI-100 Turning gain knobs into gain+key knobs | 11 | 04.09.2010 |
| Ok guys, I have modded the 3.5 TSI file to add the functionality that when the shift key is held, the "gain" knob becomes the "key" knob. I was bored so I thought I would do a little tutorial on how to do it yourself. I have always used the key feature in Traktor because during… | ||
| 29.08.2010 noticing different labeled jog wheels | 1 | 01.09.2010 |
| I have been researching alot on the vci 100 and before i buy & I have noticed some say on the jog wheel, "USB midi control" "DJ Midi controler" and some say nothing. What are the differences? thank you ! | ||
| 21.08.2010 Browser navigation help | 3 | 31.08.2010 |
| I believe I may be missing something....I'm able to navigate through any playlist using the up and down arrow keys within the browser window using the vci-100 and then load either into deck a or b with the left right arrows, however, I've never been able to figure out how to change playlists in the… | ||
| 22.08.2010 Questions about my VCI 100... | 7 | 30.08.2010 |
| I just recently bought a brand new VCI 100 and I have to say that I'm very happy with my purchase. Not only it performs as expected... it gives me everything that I need in order to to what I want to do. But... I just have some intriguing questions that hopefully I can get an answer.… | ||
| 30.08.2010 VCI 100 SE - Latest Overlay & Firmware Test | 4 | 30.08.2010 |
| Hey Guys (and hell, hopefully some Gals out there too), So I just wanted to verify a few things before I go look at a VCI 100 SE tomorrow. What is the Latest Overlay (and thus Mapping)? I've found these two different overlays (online) and I assume that the shop is the latest, but I just… | ||
| 28.08.2010 vci 100 (original, silver) map for traktor pro!! | 1 | 30.08.2010 |
| Hi guys, I cant find the vci 100 tsi for traktor pro... pls help me with that... I need to make each button work perfectly, low with traktor low, etc THX | ||
| 28.08.2010 Arcade Buttons stop working when i re attach back plate | 3 | 28.08.2010 |
| Ok.... So it's taken about three days of my life to try and do this arcade mod... and i sort of want to kill myself... So all the buttons seem to be working now, did the FW upgrade to 1.3, imported latest tsi. Basically, when I reattach the back plate to the vci, the buttons stop… | ||
| 27.08.2010 Trouble Importing SE TSI | 2 | 28.08.2010 |
| What am i doing wrong???!@!!!! I've just doen the whole arcade mod, firmware etc. I can't import the tsi for love nor money. It's just blank!!! Please help me some one | ||
| 27.08.2010 My Stealth Control wont appear. help me please!! | 2 | 27.08.2010 |
| Hello, I got a stealth control this week. I've installed the Traktor LE on my Macbook Pro, which comes with it, and the omnicontrol driver which is on the same disk. Firstly, is this the right driver? I thought the omnicontrol was a different piece of hardware?? Once I opened traktor the first… | ||
| 24.08.2010 Help: Timecode + VCI-100se = disaster! | 0 | 26.08.2010 |
| I know this has come up before but I'm wondering if there is any solution, and I'm not sure whether the culprit is the NI software or the VCI-100 tsi. Basically, I want to use my VCI-100se AND my turntables, in either internal or external mode, with timecode vinyl. The problem is that if a deck… | ||
| 25.08.2010 VCI-100SE Sudden Glitches (tsi) | 4 | 26.08.2010 |
| Hi! I've been happily using my VCI-100SE for a few months now, and everything has been working great. I made some major additions to my collection over the past few days, but did not actually use the VCI or Traktor to DJ. When I tried to do so today all of the configurations seemed messed… | ||
| 24.08.2010 arcade buttons temporarily not working | 0 | 25.08.2010 |
| this was kinda odd. was setting up my gear at around 20:00 to 21:00 and noticed that the arcade buttons were somewhat unresponsive. it seemed to be worse on some buttons, with some of the buttons almost never working and others working most of the time. however hitting the buttons harder and… | ||
| 25.08.2010 VCI-100SE Deck C/D issues (URGENT HELP NEEDED) | 8 | 25.08.2010 |
| Hi All....I am in desperate need of some help!! I am using a Vci100se with tsi file 2_5Tpro 1.2.tsi and tracktor pro (1.2.2 I believe) i know its a old style set up but its always worked perfect for my style of mixing up till now. i haven't made any changes to my settings or anything major on… | ||
| 23.08.2010 Weird Glitch? | 7 | 23.08.2010 |
| I just got a new vci-100 SE everything appears to be working correctly, but sometimes if i push the echo / slice buttons traktor slightly flickers pausing the music a split second? I have not tried reinstalling traktor, but I was curios if anyone else is having this issue. FYI Audio Card not… | ||
| 14.08.2010 Couple questions-noob here | 7 | 23.08.2010 |
| finally got my vci100se. Been watching the tutorial videos, they have helped a little bit except when Ean says "press this one button, when in reality he is pressing 2 or 3 to get to that point without telling us . Is there a PDF file for the mappings to give you a better idea of what the… | ||
| 23.08.2010 Sound Drops Out For A Split Second | 10 | 23.08.2010 |
| I am running Traktor Pro on my Hewlett Packard laptop running Windows 7 x64 Professional with a Vestax VCI 100 & the Native Instruments audio 8. I am coming out of channel A on the Audio 8 and into my amp The laptop has a 3 gig processor and 4 gig of ram. So I am practising my Techno set and… | ||
| 20.08.2010 vci-100se Crossfader issues | 3 | 20.08.2010 |
| Help please my crossfader does not cross fade it snaps to and from left side.... | ||
| 15.08.2010 Change mapping of SCRATCH button? | 0 | 15.08.2010 |
| I am not very good at the midi programming and was wondering if someone could help with my situation: I want to use the SCRATCH button to do the following: When the scratch button light is on I would like it to activate the scratch control for using timecode vinyl and to put it in relative… | ||
| 14.08.2010 Outer rim of VCI 100 SE Jogs | 5 | 15.08.2010 |
| Just wondering if the outer plastic edge of the jogs still act as nudges on the VCI SE or do you have to go into CDJ mode to get the platters to nudge? |
<< Back to forum homeAdd new thread