Firmware 1.3 temporarily unavailable?

Home :: DJ TechTools' VCI-100 FAQ :: Firmware 1.3 temporarily unavailable?Reply
Firmware 1.3 temporarily unavailable?
Posted on: 20.10.2009 by Shaquana Wesselhoff
Jusr got my little vci 100 (changed from a vci 300) and i was all ramped up to gert some upgrades, strarting from firmware and moving up, but store says its temporarily unavailable, any idea when its back on again? cos I'm really looking forward to getting to grips with some of the stuff Ean was showing on 100SE video, granted i need to get my hands on the overlay too but hey, one step at a time
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by EanGolden
You need to unzip the file and use the .mot file NOT the zip file

see here:

Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Hi Ean,

Could you tell me where can I download the File, I dont find it .
Janina Edu
03.12.2009
Originally Posted by sabastinematthews
Tried it again and nothing. I don't know if you know how to read this cause i don't. but this is what i get
Flash Development Toolkit and flash programming components
are provided without support

OS: Windows XP [Admin]
FDT API initialised: version 4, 02, 00, 008
Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device 'H8/3052F' on 'COM1'
Configuration:
'BOOT Mode' connection - using emulated interface
Opening port 'COM1' ...
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Received immediate response from device: 0xAA
Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde'
Downloading and verifying micro kernel...
Device is erasing...
Erase Timeout value set to 21 seconds
Erase Successful
micro-Kernel download successful
Sending inquiry for getting line size
Buffer size has been set to default (128 bytes)
Sending selection of device command
Selection of Device - Device selected, code 0302
Sending selection of clock mode
Sending selection of clock mode
Selection of Clock Mode - Clock selected, code 0
Changing baud rate to 38400 bps
Set baud rate value = 38400
Downloading main kernel 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde'
Main kernel download complete...
Connection complete
Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Operation on User Flash
Downloaded the operation module
Writing image to device... [0x00000000 - 0x00005FFF]
Data programmed at the following positions:
0x00000000 - 0x00005FFF Length : 0x00006000
24 K programmed in 11 seconds
Image successfully written to device

Where it says processing file:"C:\program etc is where i get the "This is not a SRecord loading raw data" I get this message twice. What does it mean?
Hi, I have almost the same Problem, could you tell me where do I find the
vci-100se_13_firmware.zip file? I searching the whole day and nothing

Thanks
Alida Lagrave
01.11.2009
Originally Posted by byzantine
Hey Ean, any news on when the firmware-uprade-kit will be available again? I'm really looking forward to buying this thing in combination with your newest overlay. cool stuff
Same here! Eagerly waiting for it to available!
Heidi Alred
21.10.2009
Originally Posted by midifidler
Also please note guys a monitor cable is not a serial cable, VGA monitor cables while using D-SUB style connectors are 15 pin not 9 pin.
what if it's a DB-9 male to DB-9 male (ie. identical on both ends) cable, will that work? I've got one of those laying around, I'm hoping I can use it

it basically looks like this, only both ends are male:
Janina Edu
03.12.2009
Originally Posted by weltraumpapst
it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip

Hey, I believe that was the Problem.

Sch
Janina Edu
03.12.2009
Originally Posted by EanGolden
You need to unzip the file and use the .mot file NOT the zip file

see here:

Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Hi Ean,

Could you tell me where can I download the File, I dont find it .
robin loo
03.12.2009		it's not that comlicated.. searched for firmware on the main page, page 3 gives you this:

http://www.djranking s.com/2008/08/1...-100-firmware/

ddl of the firmware: http://www.djranking s.com/wp-conten...3_firmware.zip
Janina Edu
03.12.2009
Originally Posted by sabastinematthews
Tried it again and nothing. I don't know if you know how to read this cause i don't. but this is what i get
Flash Development Toolkit and flash programming components
are provided without support

OS: Windows XP [Admin]
FDT API initialised: version 4, 02, 00, 008
Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A
Connecting to device 'H8/3052F' on 'COM1'
Configuration:
'BOOT Mode' connection - using emulated interface
Opening port 'COM1' ...
Loading Comms DLL
Loaded Comms DLL
Initiating BOOT SCI sequence
Attempting 9600
Received immediate response from device: 0xAA
Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde'
Downloading and verifying micro kernel...
Device is erasing...
Erase Timeout value set to 21 seconds
Erase Successful
micro-Kernel download successful
Sending inquiry for getting line size
Buffer size has been set to default (128 bytes)
Sending selection of device command
Selection of Device - Device selected, code 0302
Sending selection of clock mode
Sending selection of clock mode
Selection of Clock Mode - Clock selected, code 0
Changing baud rate to 38400 bps
Set baud rate value = 38400
Downloading main kernel 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde'
Main kernel download complete...
Connection complete
Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Operation on User Flash
Downloaded the operation module
Writing image to device... [0x00000000 - 0x00005FFF]
Data programmed at the following positions:
0x00000000 - 0x00005FFF Length : 0x00006000
24 K programmed in 11 seconds
Image successfully written to device

Where it says processing file:"C:\program etc is where i get the "This is not a SRecord loading raw data" I get this message twice. What does it mean?
Hi, I have almost the same Problem, could you tell me where do I find the
vci-100se_13_firmware.zip file? I searching the whole day and nothing

Thanks
Alida Lagrave
01.11.2009
Originally Posted by byzantine
Hey Ean, any news on when the firmware-uprade-kit will be available again? I'm really looking forward to buying this thing in combination with your newest overlay. cool stuff
Same here! Eagerly waiting for it to available!
Zachery Deubler
24.10.2009		Hey Ean, any news on when the firmware-uprade-kit will be available again? I'm really looking forward to buying this thing in combination with your newest overlay. cool stuff
nelson herzon
21.10.2009		possible. they sell an gender changer at radio shack for about 10 dollars
Heidi Alred
21.10.2009
Originally Posted by midifidler
Also please note guys a monitor cable is not a serial cable, VGA monitor cables while using D-SUB style connectors are 15 pin not 9 pin.
what if it's a DB-9 male to DB-9 male (ie. identical on both ends) cable, will that work? I've got one of those laying around, I'm hoping I can use it

it basically looks like this, only both ends are male:
Adolf Hit
21.10.2009		Also please note guys a monitor cable is not a serial cable, VGA monitor cables while using D-SUB style connectors are 15 pin not 9 pin.

21.10.2009		You need to unzip the file and use the .mot file NOT the zip file

see here:

Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Processing file :"C:\Program Files\vci-100se_13_firmware.zip"
Shaquana Wesselhoff
21.10.2009		sabastinematthews had any luck mate? Hope everything is turning out ok, best of luck mate
Adolf Hit
20.10.2009		Lol dude you are programming it with the zip file, try extracting the file from the zip and then reprogramming and you will be good to go.

Sorry about the stock situation guys, I have all the parts for the next batch of update cables sitting right next to me, they should be in stock in about two weeks.

For some reason you guys seem to sense when stocks are running low and the last few allways go quicker than we expected.
nelson herzon
20.10.2009		Cost me alot of time and money. Not a very happy camper right now. tried both ways and still got the same results from both. What could the problem be. Re downloaded the file and still get "this is not a SRecord loading Raw Data"
nelson herzon
20.10.2009
Originally Posted by Agent Cooper
Yup DB9 pin out works just fine. The extender cable works good because one end is usually male and the other end female. If you don't have a serial port to work with, I would try and find a friend who has a box that does. Your life will be much easier. I had the same problem while trying to use serial to usb, and when I changed to a DB9 cable it worked first time.
I was using serial to serail ran out and got usb to serial and get the same results from 3 computers. Same messages and vci 100 won't turn on.
nelson herzon
20.10.2009		this is crazy. already spent 200 and still no results. Already cost me more I had to pass my dates on to a buddy of mine to cover for me. I still getting the same thing both ways. I am using vci 100 with firmware 1.2. I wanted 1.3 for all the added features. Now I have nothing. I bought both types of connections, upgrade kit, overlay, arcade buttons kit, traktor pro to upgrade everything and can't use nothing. somebody please have pity on me and help me out of a bad spot
Heidi Alred
20.10.2009
Originally Posted by Agent Cooper
The extender cable works good because one end is usually male and the other end female.
don't both ends need to be male, seeing as how the firmware upgrade piece is female? On my laptop the serial port is female as well - maybe it differs for other computers
nelson herzon
20.10.2009		I was using serial to serial as described. I ran out and got a usb also and still the same thing happens as with the serial. i ran both ways on 3 computers and I am still DOA.
Madeline Rega
20.10.2009		Yup DB9 pin out works just fine. The extender cable works good because one end is usually male and the other end female. If you don't have a serial port to work with, I would try and find a friend who has a box that does. Your life will be much easier. I had the same problem while trying to use serial to usb, and when I changed to a DB9 cable it worked first time.
Heidi Alred
20.10.2009
Originally Posted by weltraumpapst
(a 'monitor extension cable' worked for me like a charme)
as in just a regular monitor cable with DB9 male connectors on both ends? Because that would be fantastic
Shaquana Wesselhoff
20.10.2009		but what if his setup is like mine? Ie no com port, only usb?
robin loo
20.10.2009		if you dont want any trouble, take a serial2serial.. (a 'monitor extension cable' worked for me like a charme)

<< Back to DJ TechTools' VCI-100 FAQReply
  • Page:
  • 1
  • 2
  • >>
  • Total: 50

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy