Vci-100se 3_0 mapping *beta*
Vci-100se 3_0 mapping *beta* This mapping is no longer in beta and is officially launched. You can download the new mapping and provide feedback here: http://djranking s.com/community /showthread.php?t=10733 | |
| Karine Noe 23.01.2010 |
Originally Posted by EanGolden
|
| Jolyn Brunello 20.01.2010 |
Originally Posted by lsmith
|
| Earnest Spink 19.01.2010 |
Originally Posted by MisterMoleyMole
Some of the "techheads" around here described it a bit. I posted this on page two of this 3_0 thread (so anyone having lockups or the sounds might want to go with this workaround): Quote Leon.R: This link is to a thread (directly page 8) with the "workaround" of the lock-up problem when having the VCI-100 as midi out device and going crazy with midi communication: http://djranking s.com/community /showthr...?t=6792&page=8 Here another one: http://djranking s.com/community /showthread.php?t=2321 There are and were more than these two. |
| Earnest Spink 19.01.2010 |
Originally Posted by MisterMoleyMole
let me say this... I can reproduce a freeze of traktor accepting vci signals if i go crazy with midi ouput, e.g. 2 deck fader fx mode, on three of my different windows setups with three different soundcards! From what I understand, it has to do with too much midi output between the vci and traktor. AFTER installing loopbe and bomes I can't cause the freeze anymore! The two additional programs seem to "thin out" the midi traffic. And you know what, I just switched back to just the vci and traktor (changed the settings to not route through loopbe and bomes) and can cause a freeze of my DJ System and also have the noises (described in this thread with 3_0) when pressing the preset buttons! PS: My DJ Setup is in the Signature. |
| Doug Bieling 19.01.2010 |
Originally Posted by MisterMoleyMole
|
| Doug Bieling 17.01.2010 |
Originally Posted by vageotter
|
| Oretha Plows 28.01.2010 | Hi there this might be a silly question but i was just wondering if someone could tell me some new sections work 1.The FX section 2.The slice and echo buttons 3.sampler |
| 27.01.2010 | This mapping is no longer in beta and is officially launched. You can download the new mapping and provide feedback here: http://djranking s.com/community /showthread.php?t=10733 |
| Sari Bhattacharya 26.01.2010 | Any word on when we will be seeing the legitimate 3_0 mapping? In the meantime I will continue to have fun tearing these tables to shreds, ! |
| Karine Noe 23.01.2010 |
Originally Posted by EanGolden
|
| Tawnya Shepp 20.01.2010 | Now I'm still getting the hang of understanding "Midi Mappings"...soo I don't really know, why this worked for me, but I'd thought I share. My Setup: Mac Book Pro (Leopard OSX 10.5.8 ) Indigo DJx SoundCard VCI-100SE [Arcade Styleeee] @calvin01 I can understand your frustration, but @lsmith is Right, it is SOOO Worth it!! I attached the current .tsi that I'm using. If you follow all the tips in the earlier part of the thread, and make sure all of your adjustments are correct and load it up! You can have some fun, and start killin' it with your New Gear :-) BUGS: -The EQ FX led stays lit, in DECK A, but works -My Deck C is being strange...says "Audio Through" and won't load up tracks -My Deck D loads, works, but LED stays lit -Juggle LED stays lit, (but I control it from from 3rd knob away, so it works) *Note(s): Press the "Juggle" button, so that you can restart your songs whenever. Personally, this is something that tripped me up for a bit. *For my Deck A, the EQ knobs were controlling my FX1 for Deck A (no idea why!) So pushing the EQ FX, fixes this, and allows your Low/Mid/Hi Control again. Hope this helps!! Enjoy ~Lady Lane~ |
| Jolyn Brunello 20.01.2010 |
Originally Posted by lsmith
|
| 20.01.2010 | Thanks guys for the awesome bug testing! 7 pages of great feedback. We have a lot of work to do today and tomorrow. This weekend is D-day for getting this mapping bug free and ready for the public! |
| Leota Saniuk 20.01.2010 | @calvin01: i believe there is enough working that it could be worthwhile to use it. especially if you plan on stick with the 3.x series afterwards. at the same time, it might be easier to start with one of the mappings that has a detailed walkthrough video. |
| Jolyn Brunello 20.01.2010 | it seems everyone is having 1 problem or another at the moment.is anyone using this new mapping without problems?.i ask because i've only just got my vci and am new to traktor so im trying to get used to mixing with it and am dont want to try the new mapping at the mo incase its not functioning right as i wouldn't know if it was me or the mapping doing something wrong.thanx |
| Earnest Spink 19.01.2010 |
Originally Posted by MisterMoleyMole
Some of the "techheads" around here described it a bit. I posted this on page two of this 3_0 thread (so anyone having lockups or the sounds might want to go with this workaround): Quote Leon.R: This link is to a thread (directly page 8) with the "workaround" of the lock-up problem when having the VCI-100 as midi out device and going crazy with midi communication: http://djranking s.com/community /showthr...?t=6792&page=8 Here another one: http://djranking s.com/community /showthread.php?t=2321 There are and were more than these two. |
| Earnest Spink 19.01.2010 |
Originally Posted by MisterMoleyMole
let me say this... I can reproduce a freeze of traktor accepting vci signals if i go crazy with midi ouput, e.g. 2 deck fader fx mode, on three of my different windows setups with three different soundcards! From what I understand, it has to do with too much midi output between the vci and traktor. AFTER installing loopbe and bomes I can't cause the freeze anymore! The two additional programs seem to "thin out" the midi traffic. And you know what, I just switched back to just the vci and traktor (changed the settings to not route through loopbe and bomes) and can cause a freeze of my DJ System and also have the noises (described in this thread with 3_0) when pressing the preset buttons! PS: My DJ Setup is in the Signature. |
| Doug Bieling 19.01.2010 |
Originally Posted by MisterMoleyMole
|
| MINOL D 18.01.2010 | Was fookn aboot on it, this is what i have found using 1.2.3 FW 1.3 The load presets are working fine for me when u hold 1-4 make sure you push the headphones twice, this loads the effects then sets them. JUGGLE was loading turntable fx or stretch cant remember changed it in midi settings but still having problems with it. Slice -Keep finger on and turn the jog wheel for cool build up effect. if another effect is on slicer like when you use sampler and you engage it plays the effect and doesn't load slicer Echo - Working, keep finger on echo for echo(u don't say) touch jog wheel for freeze effect touch again to turn off. MASH & REVERB where slice and echo are, i cant get them doing anything maybe you have not got round to it yet, i don't no. Sync - I dont like sync toggle so i changed it to hold on decks B & D but i noticed A & C were already on this but it was toggle when pressed, I changed in midi settings but i cant get it to work as hold. Whats up with this, how do i change it? Can any one else confirm what i have said or is this just on my end? Cant wait till this is fully finished,believe it is gona be a monster of a tsi. |
| Jeannette Heads 17.01.2010 | I got this worked out. I added an in for sync mapped to C6 and set to hold, and changed the out for the sync mapped to a#4 from ch02 to ch01. |
| Jeannette Heads 17.01.2010 | Activating a loop on deck B momentarily activates sync, and the sync light flashes (as was the behavior in 2.5). This doesnt work on deck A. I can add the funtionality to make loop activation momentarily sync, but I can't get the corresponding sync light flash to work. There's some strange mapping on the A side that doesnt correspond at all with the way it's mapped on the B side. |
| Many Atia 16.01.2010 | haven't read through the thread, but grabbing the jog wheel then touching slice/echo makes the track stop cold. Solution -> make slice/echo deactivate scratch mode so traktor "releases the platter" when you're trying to mess with the fx but touch the jog wheel too soon |
| Mireille Hagert 16.01.2010 | I believe I've found another one that I don't believe has been mentioned. When I am in the first efx preset on efx bank 1 (only in advanced efx mode), the X-fader controls the dry/wet. Which is pretty cool, but I don't want it to do this all the time. Maybe it's meant to do this? |
| Leota Saniuk 17.01.2010 | not a bug report but some feedback. it would be nice to get quick access to the "freeze trick", that you introduced for changing tempos, via the new mapping. however if i briefly hit the echo button and then select the "freeze" fx button to prepare things, when i then hit the echo button again it deselects the "freeze" fx button. plus when i release the echo button it obviously also kills the fx assignment as well as disables the effect. not sure if there is any way to get this done. obviously the FX 3/4 are reserved to these magic effect buttons, so there is also no way to just use the manual controls. obviously i can use FX 1/2 for this, but then i need to manually set up everything. obviously shit+echo/slicer is already mapped to mash/reverb (though actually trying to use this breaks the entire magic effects as other people have reported already). |
| Doug Bieling 17.01.2010 |
Originally Posted by vageotter
|
| Khalilah Srp 16.01.2010 |
Originally Posted by vageotter
thanks guys |
| Leota Saniuk 16.01.2010 |
Originally Posted by MisterMoleyMole
|
| Mireille Hagert 15.01.2010 | Think I've found a couple more maybe:
|
| Mireille Hagert 15.01.2010 | After several hours of headache toevening
I've finally upgraded the firmware to 1.3 (with a LOT of help from MisterMoleyMole, thanks) Anyway I thought I best update my list of bugs as some have now been resolved with the new FW. Filters now go a lot further down, but still not all the way, and they are still very erratic. i.e. go to different amounts each time. Only button not to do anything in fx's bank 1 and 2 is the 2nd button out of the four (or the first actual fx button next to the dry/wet.) Sync button now works on both sides I still have the rest of the issues I mentioned. Thanks again, I actually really like the new mapping now, more than I originally thought I would. |
| Doug Bieling 15.01.2010 |
|
| Doug Bieling 16.01.2010 | Still not mapped the simple but very useful tool When browse button is pressed the cursor should jump straight to the search box. Why this isn't standard in the mapping I don't know. Its amaazingly useful and stops the need to use the mouse to put it there manually. It can be done as i have done it just don't see why it aint standard. I'm sure there must be a fair few others that map this in when we get a new mapping. Sorry to rant a bit but I suggested this many releases ago..... i'm calm now Anyway, back to playing PS .... anyone worked out the buttons across the bottom yet that are supposed to do some more efx work? |
| Debroah Genteman 14.01.2010 | I have to say that this mapping is by far the best one yet. Everything is laid out much smarter. I'm glad to see snap beat and quantize leave from such large useful buttons since I never used them once! After only using this a couple evening s I am way impressed - can't wait for the overlay. I never got used to the "fx on" buttons being where they are in 2.5 i never liked the vertical layout, and fx presets are way more useful anyways. I love that fader fx and juggle are on buttons instead of dials. Not to be repetitive but this layout is so much smarter. Having SLICE and ECHO under the platters is so sick - i always had those assigned in FX but this way is so much faster. The only issues I have is that SAMPLE does nothing but lock up the VCI and MASH and REVERB do nothing at all. These issues seem well documented in this thread. A friend of mine who is a top DJ turned me on to this site a less than a year ago and I love it. You really deserve more recognition for your efforts Ean. I hope NAMM goes well for you - I told my coworkers to check out your booth because I truly believe THIS is the future of DJing. |
| Mireille Hagert 14.01.2010 |
Originally Posted by Zod
|
| Jeannette Heads 15.01.2010 |
Originally Posted by MisterMoleyMole
|
| Corey Holm 14.01.2010 | I just wonder Ean or somebody else: Why do u Midi Map the Re-Play button with "play/pause and jump to act cue instead of using only "Cue (Cue Play)? Is'nt that the same thing but only one Midi Map code? More Bugs i found: I cant get "Shift + Mash" and "Shift + Reverb" to work. |
| Mireille Hagert 14.01.2010 | In addition the other things I pointed out earlier I also find a clicking/buzzing type noise when pressing certain buttons. The rute FX button does it, the two juggle mode buttons also do it. |
| Anabel Madeira 14.01.2010 |
Originally Posted by MisterMoleyMole
never thought I'd be called a kid with 40 looming in the not too distant future |
| Leota Saniuk 14.01.2010 | when i press and hold shift and press and hold play at the same time (to do re-play) and then release the shift and then release play, the play button is stuck at behaving like re-play until i press shift again. PS: in case you prefer to get the bugs in a more structured manner, allowing people to more easily say "me too" and provide additional information you could use the google code project i setup for DJTT related development http://code.google.com/p/djtt/issues/list |
| Mireille Hagert 14.01.2010 |
Originally Posted by MisterMoleyMole
I must be getting old aswell, I didn't have a clue what q4t meant until you posted the link so thanks for that. |
| Doug Bieling 14.01.2010 |
Originally Posted by kewlbreeze
http://www.urbandictionary.com/define.php?term=q4t |
<< Back to DJ TechTools' VCI-100 FAQReply