Traditional House
Progressive House
Tech House
Techno
Electro House
Trance
Electronica

United States
United Kingdom
Germany
Italy
France
Spain
Netherlands

Download the Updated VCI-100SE Mapping (3_5_2)

Home :: DJ TechTools' VCI-100 FAQ :: Download the Updated VCI-100SE Mapping (3_5_2)Reply

Download the Updated VCI-100SE Mapping (3_5_2) Posted on: 14.07.2010 by Jodi Lacerra Due to popular demand, the DJTechtools VCI-100SE ver. 3_5_1 tsi mapping (http://www.djranking s.com/community /showthread.php?t=12739) has been updated to a newer version, 3_5_2! This update has fixed most all of the remaining bugs, incorporated some community user's requests, and has added some new functionality to the mapping as well. There is also now a lengthy and thorough 9 page TSI Walkthrough document that is included in the attached zip file that explains the basic functionality of the mapping and its features (including some new ones). A huge thanks goes out to pilmat for his huge help with the walkthough! The following bugs have been fixed since 3_5_1: Outer Jog Wheel now controls Tempo Bend in Fader FX Mode Outer Jog Wheel now controls Tempo Bend while holding SLICE/ECHO buttons When holding SLICE/ECHO, only the jog wheel of the Deck you press the SLICE/ECHO button on will control the SLICE/ECHO parameters. Modifier3 would get stuck if you were holding Shift and one of the Bottom4 buttons and released Shift first. When copying layered decks (A->C or B->D) the volume of the copied deck (C/D) defaults to zero now to avoid the volume jump. In Fader FX mode w/Scratch off the Right deck, spinning the jog wheel quickly would turn on FX2 Effect1 but not release it, now it does. The following features have been added since 3_5_1: Shift+Filter = Key Control Shift+Slice = Slice Toggled On Shift+Echo = Echo Freeze (aka Echo+Feedback) Toggled On Shift+FX Preset 1 = Cruise Mode Shift+FX Preset 2 = Tree Browser Up Shift+FX Preset 3 = Tree Browser Down SHift+FX Preset 4 = Tree Browser Expand/Collapse One of the requested features I couldn't implement was offsetting the LEDs of the four bottom buttons (for non-Arcades) in Juggle Mode to differentiate 1-4 & 5-8. I liked the idea but couldn't get it to work for those LEDs for some reason. Sorry, it'll be looked into further in the future. If anyone finds any bugs or odd functionalities with this updated mapping, please let me know (via this thread)! Requirements You must have Traktor 1.24 or later to use this file otherwise it will not import properly. To Load this file Select the BIG import button in the lower left hand corner of the preferences tab. If this is your first time loading the TSI file, please load it 2 TIMES for the fx to load properly. The 1st and 2nd time you run Traktor after importing this TSI file, the controller may lock up in fader fx mode. Just quit and re-open the program twice and the issue should go away. What Settings to Load
Leeanna Ayla 27.09.2010	Originally Posted by Gianmarco i understand that the new firmware allows for the better jogweel and pitch bend performance, but what does the new mapping offer other than that? From the 3_6_3 thread Originally Posted by EanGolden [ WHAT CHANGED? Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased
Takisha Hodulik 27.09.2010	Originally Posted by flashflooder The VCI-100 v3.6 mapping was designed to work with firmwares 1.2/1.3/1.4. So if you are still using a VCI-100 with 1.3 firmware, you can still use the new mapping and you should not experience any issues or limitations. i understand that the new firmware allows for the better jogweel and pitch bend performance, but what does the new mapping offer other than that?
Jodi Lacerra 27.09.2010	Originally Posted by dorkimoe i have the same question does it do anything? The VCI-100 v3.6 mapping was designed to work with firmwares 1.2/1.3/1.4. So if you are still using a VCI-100 with 1.3 firmware, you can still use the new mapping and you should not experience any issues or limitations.
Shantae Kaing 25.09.2010	Originally Posted by andreanegri Is it a good idea to use tsi file 3.6 on VCI100 with 1.3 firmware? Andrea i have the same question does it do anything?
Suzanna Paddock 18.09.2010	Originally Posted by flashflooder Ok. I am curious though, are there people out there that prefer Play/Pause on the top layer. +1 I also use slice & freeze alot so keep 'em as is please. Can we also believe of a TSI for people who mix externally my xfaders & eqs are begging to be reassigned.... cheers
Olympia Kanouff 17.09.2010	You should be using freeze & slice, they are half the fun. And if you play "non house music" like old soul, funk and disco the freeze button is essential for mixing out of those non DJ-friendly tracks. And just in case thats not reason enough to keep them.....the buttons are named on the overlays, you wouldn't want to make my lovely overlay obselete already would you. Originally Posted by dros Hi, I believe I'm missing both the "set cue" and "cue-play" buttons on the main layer. On the other side, I don't use slice and freeze effects so often. Maybe we should believe about putting them on the second (shift activated) layer. What do others believe ? Regards.
Jodi Lacerra 16.09.2010	Originally Posted by busstop Please could you do a "Cue/Play" version of the new TSI at the same time if possible. I'm sure it would be appreciated by the old school T3 heads. Ok. I am curious though, are there people out there that prefer Play/Pause on the top layer (how the mapping is now) instead of Cue Play? If it seems to be a unanimous no, it might be worth officially switching on the tsi. That's how we did the Midi Fighter mapping too.
Edris Acevedo 16.09.2010	Originally Posted by busstop Please could you do a "Cue/Play" version of the new TSI at the same time if possible. I'm sure it would be appreciated by the old school T3 heads. +1
Olympia Kanouff 16.09.2010	Please could you do a "Cue/Play" version of the new TSI at the same time if possible. I'm sure it would be appreciated by the old school T3 heads. Originally Posted by flashflooder Ok, so DJTT is going to be releasing a mapping update to go along with an updated firmware (you should see this within a week) and I wanted to poll you guys to see if there are any other functions that you feel the VCI-100SE is lacking or that you'd really like to see implemented/changed. For obvious reasons, there won't be any major functional changes (i.e., the overlays still need to make sense) but if people have thoughts or comments they'd like to share please let me know and I will look into incorporating them. Thanks!
Leeanna Ayla 27.09.2010	Originally Posted by Gianmarco i understand that the new firmware allows for the better jogweel and pitch bend performance, but what does the new mapping offer other than that? From the 3_6_3 thread Originally Posted by EanGolden [ WHAT CHANGED? Added support for the high res faders and jogs in firmware 1.4 Changed Play to "Re-Play" - Use Shift + Play to Play/Pause. FX preset #4 is improved simplified the FX presets in the effect section (4 knobs and buttons) Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs) Modified the delay parameters of the ECHO function Pitch Bend sensitivity increased
Takisha Hodulik 27.09.2010	Originally Posted by flashflooder The VCI-100 v3.6 mapping was designed to work with firmwares 1.2/1.3/1.4. So if you are still using a VCI-100 with 1.3 firmware, you can still use the new mapping and you should not experience any issues or limitations. i understand that the new firmware allows for the better jogweel and pitch bend performance, but what does the new mapping offer other than that?
Jodi Lacerra 27.09.2010	Originally Posted by dorkimoe i have the same question does it do anything? The VCI-100 v3.6 mapping was designed to work with firmwares 1.2/1.3/1.4. So if you are still using a VCI-100 with 1.3 firmware, you can still use the new mapping and you should not experience any issues or limitations.
Shantae Kaing 25.09.2010	Originally Posted by andreanegri Is it a good idea to use tsi file 3.6 on VCI100 with 1.3 firmware? Andrea i have the same question does it do anything?
Rosaline Garel 21.09.2010	Is it a good idea to use tsi file 3.6 on VCI100 with 1.3 firmware? Andrea
Jodi Lacerra 20.09.2010	Just so everyone knows, the new VCI-100SE firmware (v1.4) and mapping (v3.6) have been released and can be found here http://www.djranking s.com/community /showthread.php?t=18181 Please use the new thread for any applicable issues/questions. Thanks!
Danae Dumler 17.09.2010	I preferred them on the top layer until after I got used to the new mapping; now I like the way it is. But I would readapt again if you moved them, it's not as big a deal as I thought it was at first.
Suzanna Paddock 18.09.2010	Originally Posted by flashflooder Ok. I am curious though, are there people out there that prefer Play/Pause on the top layer. +1 I also use slice & freeze alot so keep 'em as is please. Can we also believe of a TSI for people who mix externally my xfaders & eqs are begging to be reassigned.... cheers
Mac Fly 17.09.2010	Im sure its not hard to change it in the mappings section yourself guys. Just modify the mapping to meet your needs, thats what its all about!
Olympia Kanouff 17.09.2010	You should be using freeze & slice, they are half the fun. And if you play "non house music" like old soul, funk and disco the freeze button is essential for mixing out of those non DJ-friendly tracks. And just in case thats not reason enough to keep them.....the buttons are named on the overlays, you wouldn't want to make my lovely overlay obselete already would you. Originally Posted by dros Hi, I believe I'm missing both the "set cue" and "cue-play" buttons on the main layer. On the other side, I don't use slice and freeze effects so often. Maybe we should believe about putting them on the second (shift activated) layer. What do others believe ? Regards.
Dj Tykarma 17.09.2010	Hi, I believe I'm missing both the "set cue" and "cue-play" buttons on the main layer. On the other side, I don't use slice and freeze effects so often. Maybe we should believe about putting them on the second (shift activated) layer. What do others believe ? Regards.
Jodi Lacerra 16.09.2010	Originally Posted by busstop Please could you do a "Cue/Play" version of the new TSI at the same time if possible. I'm sure it would be appreciated by the old school T3 heads. Ok. I am curious though, are there people out there that prefer Play/Pause on the top layer (how the mapping is now) instead of Cue Play? If it seems to be a unanimous no, it might be worth officially switching on the tsi. That's how we did the Midi Fighter mapping too.
Edris Acevedo 16.09.2010	Originally Posted by busstop Please could you do a "Cue/Play" version of the new TSI at the same time if possible. I'm sure it would be appreciated by the old school T3 heads. +1
Olympia Kanouff 16.09.2010	Please could you do a "Cue/Play" version of the new TSI at the same time if possible. I'm sure it would be appreciated by the old school T3 heads. Originally Posted by flashflooder Ok, so DJTT is going to be releasing a mapping update to go along with an updated firmware (you should see this within a week) and I wanted to poll you guys to see if there are any other functions that you feel the VCI-100SE is lacking or that you'd really like to see implemented/changed. For obvious reasons, there won't be any major functional changes (i.e., the overlays still need to make sense) but if people have thoughts or comments they'd like to share please let me know and I will look into incorporating them. Thanks!
Danae Dumler 16.09.2010	Originally Posted by Gianmarco maybe a better way of knowing when yo are in juggle and fader fx modes? like maybe blinking buttons? +1 ... I don't know if the buttons blinking is the way to go since that's the signal the sampler is being engaged, but how about flashing the lights under the platters different colors? It will also help call people's attention to the fact that you're doing tricks... it's always annoying when you pull the coolest stunt you ever imagined yourself pulling off and then you look up to receive your applause, and nobody noticed anything
Meg Reinoehl 15.09.2010	Originally Posted by flashflooder Ok, so DJTT is going to be releasing a mapping update to go along with an updated firmware (you should see this within a week) and I wanted to poll you guys to see if there are any other functions that you feel the VCI-100SE is lacking or that you'd really like to see implemented/changed. For obvious reasons, there won't be any major functional changes (i.e., the overlays still need to make sense) but if people have thoughts or comments they'd like to share please let me know and I will look into incorporating them. Thanks! Shift+jog to scroll through tracks in the browser. This is helpful when messing around and not using a playlist.
Takisha Hodulik 15.09.2010	Originally Posted by photojojo I wrote this in another thread. I set mine that way, but didn't like it because I'll often mix songs that are 8% different and Traktor won't sync then. So I went back to the other way. thanks i set it like this, ill try it when i get home
Takisha Hodulik 15.09.2010	well, for us that dont want to go through the led mapping: maybe a better way of knowing when yo are in juggle and fader fx modes? like maybe blinking buttons? thanks!
Jodi Lacerra 15.09.2010	Ok, so DJTT is going to be releasing a mapping update to go along with an updated firmware (you should see this within a week) and I wanted to poll you guys to see if there are any other functions that you feel the VCI-100SE is lacking or that you'd really like to see implemented/changed. For obvious reasons, there won't be any major functional changes (i.e., the overlays still need to make sense) but if people have thoughts or comments they'd like to share please let me know and I will look into incorporating them. Thanks!
Jodi Lacerra 15.09.2010	Originally Posted by Gianmarco When I set it to 8%, I move the physical fader all the way in one direction, but it only changes a very small amount on the screen. I set it to 100%, and it still only moves the same physical amount on the screen when i move the physical one all the way in one direction. much thanks! It sounds like you went into Preferences->Transport and changed the Pitch Range to 100% but you still want greater range on the Pitch Fader. In order to make a further change, you will need to go into the Controller Manager select the VCI-100SE tsi and sort thru comments to find those listed "Tempo Fader Deck _". There should be three instances for each Deck. In each of these you will see that the Rotary Sensitivity is set to 40%. You can modify this Rotary Sens. value to alter the Pitch Fader range (i.e., increasing it will increase the tempo range). In your case, I would increase it and test it on one Deck until you get it to your liking. Then make sure you set the same value to all 12 lines for the Tempo Faders (3 each for 4 decks) to get consistent pitch fader behavior. I.E., what photojojo said. heh
Leeanna Ayla 15.09.2010	I wrote this in another thread. I set mine that way, but didn't like it because I'll often mix songs that are 8% different and Traktor won't sync then. So I went back to the other way. Click on the big gear logo in the upper right corner to get to the preference pane, then click on the controller manager section inside the preference pane. Once your in the controller manager and click on the control column to sort it by name. Find the tempo controls, should be 12 of them, and change the rotary sensitivity to 100% in all of them. You can double click on the number and type 100 in. Next go to the Transport section of the preference pane and click on reset pitch range 8%. You can choose one of the other ranges here, but you'll lose sensitivity.
Takisha Hodulik 16.09.2010	So, back to the pitch bend issue.... I know to fix the jumping issue i simply shift calibrate it at start up, but I still have this other issue. When I set it to 8%, I move the physical fader all the way in one direction, but it only changes a very small amount on the screen. I set it to 100%, and it still only moves the same physical amount on the screen when i move the physical one all the way in one direction. According to the manual: "ALL OTHER SETTINGS: Import these if you want the Pitch fader to be set to 8%, and for deck copy to work perfectly. Warning this will over-write your traktor settings! So if you like your settings, then do an export to save them before testing these. Then you can always revert later. Otherwise DONT import this part of the TSI file." does this have anything to do with it? much thanks!
Lore Schellhaas 15.09.2010	i'v instaled original TSI and it was BIG glitches then i instaled glitch fix TSI it was almost good, but little glitsches are still here. how to make it good? i want to set FX cue to pre-listen FX on the plaing deck on knobs "load a" & "laod b" on my vci 100 then it not shifted. How i can do this? And another thing: how to do jog wheel more faster in vinyl mode? winxp + 3Gb Ram + 2,6 Ghz Phenom + NI audio 2 dj one more: how can i jump betweeen tree explorer and tracks lists in brows mode? i want to make all uploads to decks by vci-100, without mouse
Leeanna Ayla 29.08.2010	Originally Posted by nutronik Shift+filter does not work for me! Using 1.2 firm and traktor 1.2.4. Is there another way to make it work, or is it just for 1.3 firmware? I can not get the key control to work when I booted into 1.2. Probably has to do with the fact that that knob sends two messages now from center.
Lauryn Beierle 29.08.2010	Originally Posted by photojojo I believe it's just a 1.3 thing, but I'm not sure. I'll try and boot into 1.2 and test it out this weekend. Thanks mate i appreciate your help!
Leeanna Ayla 27.08.2010	Originally Posted by nutronik Shift+filter does not work for me! Using 1.2 firm and traktor 1.2.4. Is there another way to make it work, or is it just for 1.3 firmware? Originally Posted by nutronik Is anyone going to answer my question please? I believe it's just a 1.3 thing, but I'm not sure. I'll try and boot into 1.2 and test it out this weekend.
Lauryn Beierle 27.08.2010	Is anyone going to answer my question please?
Edris Acevedo 24.08.2010	Originally Posted by flashflooder Thanks for reminding me! It had gotten lost on my list of to-do tasks. I have attached the most recent version of the VCI-100 3.5.2 tsi with the Play button functionality swapped to be Cue Play (like Shift+Play on the regular mapping). Enjoy. Wicked. Nice one dude!
Jodi Lacerra 23.08.2010	Originally Posted by Audio Aerosol Any news on this addition? Thanks for reminding me! It had gotten lost on my list of to-do tasks. I have attached the most recent version of the VCI-100 3.5.2 tsi with the Play button functionality swapped to be Cue Play (like Shift+Play on the regular mapping). Enjoy.
Edris Acevedo 20.08.2010	Originally Posted by flashflooder The new 3.5.2 tsi does not have the "Cue Play" functionality on the main level, it is the shift function for the Play button in the current mapping and the regular (non-shift) function is Play/Pause. Since there seems to be some demand, I will create a modified version of 3.5.2. to switch the Cue Play and Play/Pause functionality as I did before and upload it again for those who want it in a few days. If anyone needs it earlier for a gig, let me know and I could get it done sooner. Any news on this addition?
Lauryn Beierle 19.08.2010	Shift+filter does not work for me! Using 1.2 firm and traktor 1.2.4. Is there another way to make it work, or is it just for 1.3 firmware?

<< Back to DJ TechTools' VCI-100 FAQ Reply

Copyright 2012-2023 DJRANKINGS.ORG n.g.o. Chuo-ku, Osaka, Japan	Created by Ajaxel CMS
Terms & Privacy

The best DJ in Mauritania is:

Download the Updated VCI-100SE Mapping (3_5_2)