VCI-100 and Traktor 3.4 (Dj TT Special Edition)
VCI-100 and Traktor 3.4 (Dj TT Special Edition) These files will only work with VCI-100's that have the special edition firmware installed. Regular VCI-100 users may try them out as many of the functions will work but some functions will be disabled. Please post any problems or bugs in this thread and the TKS file will be updated and added here. If you want to modify it yourself and post the results feel free to also do that here. VCI-100 SE TKS Version 1.0 http://www.djranking s.com/wp-conten...0se_1_0tks.zip VCi-100 SE TKS Vesion 1.1 http://www.djranking s.com/wp-conten...lden1_1tks.zip 5th Cue point and Deck C EQ fixed. VCi-100 SE TKS Vesion 1.2 http://www.djranking s.com/wp-conten..._golden1_2.tks http://www.djranking s.com/wp-conten...lden1_2tks.zip Fixed: Deck C Cue now works in all modes Deck C filter and gain now works in Deck C mode Changed: Fader FX mode is now controlling the pitch faders and jog wheels in very interesting ways. Video to come soon. VCI-100 Bug: In normal mode, using Deck C cue will light up Deck C and Deck B cue buttons. They both work perfectly but the lighting is not working as intended. VCi-100 SE TKS Vesion 1.2 (CDJ-1000 Style) http://www.djranking s.com/wp-conten...dj-1000tks.zip http://www.djranking s.com/wp-conten...2_cdj-1000.tks This is the same as 1.2 but the jog wheels have been re-mapped as explained in this post. VCi-100 SE TKS Vesion 1.3 (CDJ-1000 Style) http://www.djranking s.com/wp-conten...3_cdj-1000.tks http://www.djranking s.com/wp-conten...dj-1000tks.zip This fixes all known bugs from 1.2 VCI-100 SE TKS Version 1.3 (TT- Style) http://www.djranking s.com/wp-conten...3_tt_style.tks http://www.djranking s.com/wp-conten...t_styletks.zip The same as the CDJ style but with tempo bending on the outside and scratching on the inside at all times. VCI-100 SE TKS Version 1.4 (TT- Style) PLEASE USE THIS ONE http://www.djranking s.com/wp-conten...4_tt_style.tks http://www.djranking s.com/wp-conten...t_styletks.zip This one fixes all known bugs including the pitch down not working on deck B when loop is on. | |
| Thomas Beecken 22.07.2008 | I tried it. With LIMITED testing, seems to be all fine. Actually, for those of us on Vista, seems like they sped up the load and closing of the program. Mine was FLYING on open and close. Track load and response felt the same but my platters are still in need of fine tuning (please see the platter thread if you believe you can help or e-mail me via the community ). |
| Justin Ratliff 22.07.2008 | My xfader seems to be mixed up, it doesn't do anything for deck A and hard over right cuts out deck B. Any one else have this problem? Is it something I've done? |
| Petio Petev 22.07.2008 | Anyone tested their SE with the new traktor v3.4 yet and is every thing functioning still? |
| Audio Unknown 22.07.2008 | Hello, finally i got my vci!! thank you ean! But i have some questions, i noticed that per channel works just one effect. ok Thats not so bad. But when i hit filter button (i am not adjusting knob for filter. amt -100%) and then i hit f.e. fx bank B, and B-mash, then amt is 100%, like it was on filter, ant beat macher works without ane knob adjustmens.. actually without turning it on with "mix/frz" knob. Can i solve this problem. I hope you understand what i want to say Couse when you hit filter automatically amt goes to 100%, it doesn`t matter in witch position it was before. Maybe it`s not so difficult to do that when you hit f.x. b-mach, amt goes automatically to 0%? traktor v3.3.1 |
| 22.07.2008 | Yes- you would need to edit the TKS. But its not going to be that simple becuase you need a value coming from the vci-100 that is <64 (half of 127) I believe there is one that is 53 on that button- so that will get you closer. You will need a midi monitor to figure out what CC its being sent on and manually enter that into the midi window in traktor. |
| Adil Laresh 22.07.2008 | question.. im using vci-100 se and I want to change the preset configuration for the h/l filter pass.. so that Q is set to 25 instead of 50 when i hit the filter button... what is the easiest way to do this? I am not very good with the midi stuff.. can I just manually edit the tks file? |
| Shane Fergusson 12.07.2008 | hi Ean, i dont believe there is a problem with the midi comming out of the vci-se, cant use midipipe im on pc, i was looking in midi setup and found that knob 3A n 4B are assigned the same notes, is that a mistake? look at the pics i post. ive deleted knob 4B (inc) shown in picure 1 and it works ok,but what should i do in the second picture? same knob duplicates are in all 4 midi pages of the tks. dim |
| 11.07.2008 | Thats very strange, I have never seen that problem. I would recommend downloading MidiPipe. * check to see what messages are being sent out by that knob * post a picture of the messages. * if something random is going out it would show up there. |
| Shane Fergusson 08.07.2008 | no one else has this problem with the effect knobs? |
| Shane Fergusson 06.07.2008 | hi, ive noticed that when i use the ''Hi-low cut Knob" on channel A, more specific every time i center the knob it increases the Effect on Channel B. for eg; when using the FilterFT2L/W and use the ''Hi-low cut Knob" on channel A when i center it the High Knob of Channel B increases step by step. has anyone else experienced this? im using VCi-100 SE TKS Vesion 1.2. what to delete in the midi page i dont want this feature and i dont know if something else will be affected so i thought i ask. has anyone maped what CC,program changes and midi comes out of each knob n Button on the SE like a tx or a pic ? it be cool and very usefull |
| Miloje Savic 21.06.2008 | fixed thanks... |
| Miloje Savic 20.06.2008 | i have the audio 8 dj sound card |
| Adil Laresh 19.06.2008 | there is a knob called ph mix, two little dials above the cue buttons... make sure they are turned on so you can hear something... the ph mix should be around 7 o clock for cue only, if you want to hear cue + playing then it should be 12 o clock and just playing 5 o clock also what sound card do you have and how have you setup the monitoring in the options |
| Miloje Savic 19.06.2008 | the cue buttons dont work for me.. im trying to listen to the songs on different decks and I cant how can i fix it.. help.. |
| Petio Petev 19.06.2008 | Fix for Gain knob volume jump after traktor autogain I was having an issues with undesirable volume jumps when touching the VCI gain knobs after traktor had auto set the gain level for the track loaded in to a deck. The way I fixed this was to go in to Preferences > midi set up > Deck gain (for both deck A + B) and checked the "Soft Takeover" When selected the gain knob only activates once the knob position is relative to the gain setting in traktor, result: no more sudden volume changes. |
| Bruno Britto 13.06.2008 | thankyou guys. Now looping great |
| 13.06.2008 | Hey Guys, to keep this thread as simple and easy to read as possible- I have answered your questions directly in the posts. I also deleted duplicate posts that asked the same question. |
| Adil Laresh 12.06.2008 | any updates on 1.3 tks file? Im an update junky |
| Alex Mayer 12.06.2008 |
Originally Posted by blancodisco
Ollie, in the loop end window, right click on the left box of the top row, and scroll down to "Loop/*2" and select that |
| Costa Pantazis 12.06.2008 | Ean, After reading the VCI-100SE only works with Traktor 3.3 not 3.2, I went ahead and update from 3.2 to 3.3.2; after upgrading to 3.3 all the FX are working correctly on VCI-100SE. But now there are a hand full LED's not signaling when certain modes are activated. (using 1.2V) after upgrading. For example Deck C LED is not on when I'm in DECK C mode is active nor is DECK C LED near the Hi/LOW Cut knob lighting up blue. The CUE and not lighting up blue when using CUE for Deck A, Deck B, and Deck C. The Loop activation LED (small red) in not lighting up either for some reason, I'm not sure if anyone else is having the same issues. Mark ANSWER Sounds to me like you dont have MIDI-OUT to the vci-100 selected in the Traktor Midi interface :-) could that be it? |
| 12.06.2008 | I believe I may Know what the LOOP Shorten button issue is, as I had this issue after I downloaded the newer tks file. If you open up the "loop end" window in the Traktor Interface. if the top row of 3 possible settings/rows, is not set to "/2".... you will not get that halfing effect of shortening the loop that you are expecting. On my version, I was showing a setting of "Fine"... which.. would appear if you are not holding the button for a long time, nothing would be moving/shortening. Give that a try. Once you set there.. Quit Traktor, and reopen and the preference should be saved on close of the app. Hope this helps, as this is what I found to be my issue. |
| Alex Mayer 12.06.2008 | can the jogwheels be assigned to pitch control in juggle mode without conflicting with the SE's firmware? 4 cue points and pitch control, like ean had in one of his earlier videos. ANSWER: You would need to change the TKS file for that. Its easy though, just look for the page with all the cue point triggers and delete #5- then add the pitch control to the top of the jog wheel. |
| Bruno Britto 12.06.2008 |
Originally Posted by OllieThomas
Basically, if you have just used beatmasher, and you DONT hit the filter button but still twiddle the hi / lo pass filter knob, it will change settings for gut and rot. same for reverb and delay hmm. was this intentional? There is only one FX slot per deck so unless you have engaged the filter, dont touch the filter knobs. There is no other way to accomplish this with Traktor. Each section is dedicated to a particular effect and if touched will effect the other fx in possibly undesirable ways. |
| Bruno Britto 12.06.2008 | Hey Ean, Sorry to point these out, but felt I had to 1. The SE 1.2 tks isnt downloadable / dodgy link. You need to Right Click and "Save As" - I have upload a Zip file for clarity 3. the Loop shorten buttons deck a and b do not shorten enough/ sometimes dont shorten at all upon triggering. is there a way i can change this in the midi settings for those insane buildups rather than shortening on traktor with mouse? You need to watch the video on creating build ups- there are 2 specific Traktor settings that need to be correct for this to work http://www.djranking s.com/2008/05/3...m-roll-effect/ |
| Costa Pantazis 04.06.2008 | Ean, The EQ on Deck C is working when selected; High's Mid's and Low's, but when Deck C is selected the Cue isn't working (to listen so the crowd doesn't hear) it's enabling Deck B's Cue not Deck C's Cue. Not sure if this is because I'm running 3.2 not 3.3 Mark |
| 04.06.2008 |
Originally Posted by The Duelist
1.3 on its way with those fixes tommorrow |
| Mister Minsk 04.06.2008 |
Originally Posted by eangolde
'Cue C' Is Now Mapped From The FX Section, However (Unlike The Other Deck C FX), It Also Requires The Deck C Performance Mode To Be Engaged To Work. Would It Be Possible To Also Map The 'Section B' Gain/Hi-Lo Cut/Filter Controls For 'Deck C Mode'? TIA The Duelist BTW: NI Did Play Around With The Order Of Effects & Things Between 3.2/3.3. There Were Many Complaints That This Affected VCI-100 Mappings. |
| 04.06.2008 | how/where do we access the 5th cue point? bb |
| Costa Pantazis 04.06.2008 | Ean, I will give the new TKS file a test run toevening when I get home from the office, yes the office suit and tie..........yeah let me know if I need to upgrade from 3.2 to 3.3, I would rather not but if I need to for the greater good I will. Thanks for everything, Mark |
| 04.06.2008 | hey Mark, I have uploaded a new TKS that fixes your EQ problem and tomorrow I will see if they made any FX order changes in 3.3. There should not have been a difference but I will confirm if its your version tomorrow. 3.3 is stable so I would not be too concerned about upgrading but let me make sure you need to. Ean |
| Costa Pantazis 04.06.2008 | Aiden, I might have to, but I believe the TKS file should work for 3.2 and 3.3, plus I'm used to 3.2 and would rather not upgrade. But if I have to I will, thanks for the link.... Mark |
| Alex Mayer 04.06.2008 |
Originally Posted by M.Hugh
http://www.native-instruments.com/in...d35af3af9d7e10 |
| Costa Pantazis 04.06.2008 | Ean, I'm using 3.2 maybe it's the version I'm running, if this is the problem how can I fix this so the FX's work? Also would this cause the High's, Mid's and Low's on Deck C not work as well? Would it be best to upgrade to verison 3.3? |
| 04.06.2008 |
Originally Posted by M.Hugh
|
| Alex Mayer 03.06.2008 | the mid oscillator doesn't do anything on the xone92 EQ. Neither, the mid hi or mid low move. is it supposed to do that? Answer: Since there are limited knobs on the vci-100 this is set up for a 3 band EQ, if you want to use the xone then please re-map the 3 available knobs to the specific bands that you want. Otherwise they will work as labeled with the pioneer and traktor EQs |
| Costa Pantazis 02.06.2008 | Ean, Another thing I noticed; The effect bank select (A,B,C,) when I have Bank A selected and select Deck A FX (Reverb) it selects Flanger so I don't the FX banks are selecting the correct FX, when I selected Flanger on Bank A and selected Deck A Flanger it indicates NO FX Selected. Other are not working correctly either.... |
| Mister Minsk 02.06.2008 | Hi Ean Thanx For Putting Together ThE VCI-100 SE Package. I't's Been Worth The Wait. I've Been Familiarizing Myself With The Layout/Functions. I Think I've Found A Minor Bug In The TKS, The 'Cue C' Button Doesn't Seem To Be Mapped. The Duelist Confirmed Bug- its on the to fix list. |
| Costa Pantazis 31.05.2008 | Ean, I loaded the TKS file for VCI-100SE but either I am not using the controller correctly or there might be some bugs. A couple of things I noticed, 1. The FX Bank Deck Select (A, B, and C) doesn't toggling between the effects when you select by using the FX Bank select. Also how do you select the ON button to turn the effect on? Answer- There is no way to do this but I am working on a solution that will at least light them up when an effect is engaged. Long story 2. On deck C are the High's, Mid's and Low's suppose to function when you have deck C on? I am able to control the volume on C but when I use the High's, Mid's and Low's they are moving on deck B. Answer- Thats a confirmed bug, will get fixed this week. 3. The loops are working for each deck (A,B,C, and D) but when I push the shorten button it doesn't shorten the loops (nothing happens) (in snap mode). I am able to hold down the deck button i.e. A for the loop will shorten but is moving in fine mode and makes the loop out of sync. It's not shortening by half Answer: This Video will Solve this problem http://www.youtube.com/watch?v=B9q2jNjOPdk |
| Miloje Savic 31.05.2008 | can anybody give me a tutorial on how to set this up... got my vci today... have the audio 8dj... how do i set it up... and how can I listen to the music.. trough the sound card Answer from DJ TT- There will be a tutorial video coming in the next few days. I shot it over the weekend and now need to do the editing. |
| team DonX 29.05.2008 |
Originally Posted by M.Hugh
|
<< Back to Post and find Controller MappingsReply