Complete VCI-300 .tsi

Home :: Post and find Controller Mappings :: Complete VCI-300 .tsiReply
Complete VCI-300 .tsi
Posted on: 05.10.2009 by Kendal Blanc
!!! LATEST UPDATE: VCI-300 2-Deck - 4th !!!

(all functions are explained in the pics)


Hi DJTT VCI-300 people,

here
Nell Gomezgomez
22.04.2010
Originally Posted by cue8chalk
Yes. I wish Vestax would provide native ASIO drivers.
Did you have to adjust anything when you loaded the TSI? I have a problem with scrubbing on both mac and pc. Like its skipping. Playback is fine though.

Have tried teh latency buffer changes. works fine in itch very wierd.
Noma Tangredi
21.04.2010
Originally Posted by netwerks
Are you using Aiso4all?
Yes. I wish Vestax would provide native ASIO drivers.
Nell Gomezgomez
20.04.2010
Originally Posted by cue8chalk
PC
Are you using Aiso4all?
Nell Gomezgomez
20.04.2010
Originally Posted by cue8chalk
This mapping is great, but I'm extremely frustrated with one thing - the scratch on/off.

If i have a track playing, and I touch the platters, it holds the track, but if I move the jog wheels without letting go of the platters (as you normally would if you're getting ready to scratch in a track), it starts playing again.

Am I the only one with this issue???
Are you using this on Mac or pc?
Oswaldo Appeldorn
15.04.2010
Originally Posted by cue8chalk
This mapping is great, but I'm extremely frustrated with one thing - the scratch on/off.

If i have a track playing, and I touch the platters, it holds the track, but if I move the jog wheels without letting go of the platters (as you normally would if you're getting ready to scratch in a track), it starts playing again.

Am I the only one with this issue???
Same for me bro... please help us it will be perfect.
Delilah Jalili
06.09.2010		http://www.djranking s.com/community /showthread.php?t=17616

http://www.djranking s.com/community /tags.php?tag=vci-300
Delilah Jalili
21.08.2010		Pasik, have you tried Robin's? Seems to be good for me for the most part, (thnx Robin!), but...

I would really appreciate some help with a 4 deck config/setup (w/faders) for a single VCI-300 (along with a multi-channel low latency sound card).
Toni Beechner
14.08.2010		Check here for other VCI-300 Traktor TSI mappings:
http://www.djranking s.com/community /showthread.php?t=15455
Emilia Colchado
20.05.2010		how do I get this mapping?
Paulita Cvetkovich
18.05.2010		Is this project dead or something ??
Wayne Washko
12.05.2010		quick question - is a midi translator (like bomes or something) needed for this VCI 300 tsi?

also, anyone using the vci for decks A + B and a Kontrol X1 to control decks C + D?
Nell Gomezgomez
22.04.2010
Originally Posted by cue8chalk
Yes. I wish Vestax would provide native ASIO drivers.
Did you have to adjust anything when you loaded the TSI? I have a problem with scrubbing on both mac and pc. Like its skipping. Playback is fine though.

Have tried teh latency buffer changes. works fine in itch very wierd.
Noma Tangredi
21.04.2010
Originally Posted by netwerks
Are you using Aiso4all?
Yes. I wish Vestax would provide native ASIO drivers.
Nell Gomezgomez
20.04.2010
Originally Posted by cue8chalk
PC
Are you using Aiso4all?
Noma Tangredi
20.04.2010		PC
Nell Gomezgomez
20.04.2010
Originally Posted by cue8chalk
This mapping is great, but I'm extremely frustrated with one thing - the scratch on/off.

If i have a track playing, and I touch the platters, it holds the track, but if I move the jog wheels without letting go of the platters (as you normally would if you're getting ready to scratch in a track), it starts playing again.

Am I the only one with this issue???
Are you using this on Mac or pc?
Oswaldo Appeldorn
15.04.2010
Originally Posted by cue8chalk
This mapping is great, but I'm extremely frustrated with one thing - the scratch on/off.

If i have a track playing, and I touch the platters, it holds the track, but if I move the jog wheels without letting go of the platters (as you normally would if you're getting ready to scratch in a track), it starts playing again.

Am I the only one with this issue???
Same for me bro... please help us it will be perfect.
Noma Tangredi
10.04.2010		This mapping is great, but I'm extremely frustrated with one thing - the scratch on/off.

If i have a track playing, and I touch the platters, it holds the track, but if I move the jog wheels without letting go of the platters (as you normally would if you're getting ready to scratch in a track), it starts playing again.

Am I the only one with this issue???
Santos Ayoubi
09.04.2010		Great mapping, thanks!
Oswaldo Appeldorn
07.04.2010		waaiting for the vinyl/itch like^^, or if you can tell me how to do it i will.
Nell Gomezgomez
28.02.2010		When will we see the video walkthrough?
Evita Stuckman
26.02.2010		are there any vci 300 and vfx 1 mappings?
Adele Lallemand
21.02.2010		Sorry if any of this post sounds a bit stupid, I'm new to the world of traktor / tsi's / midi mapping and such things!

I'm using the vci300 with itch at the moment and got bored. So been trying this tsi out with traktor pro and it's ace!

Can anyone tell me tho, if I was to buy a kontrol x1 to use with this tsi and the vci300 would that work? Would all if the functions of the tsi faders, gains, eq's etc on the vci300 work and I could use the x1 for fx / loops etc?

Thanks for any advice!

Cheers
Sanda Radigan
27.01.2010		Hey Robin i was just wondering if there was a "Numbers/Excel-document of the mapping" as listed in the post. Ive been looking at the pictures but was wondering if there was some sort of doc that explained, "to enter fx mode push ___" or something of the sort for the other functions as well.

Haha im kind of new to traktor but didnt want to pay another $300 for that vfx. Any help would be greatly appreciated and thank you for putting your time and effort into this as it looks very well thought out if i can figure out how to use it correctly.
Terese Cruzrivera
03.12.2009		I have a question for you guys. I have noticed that in the mappings that you have Robin, your audio device reads as VCI-300 (4in,4out). Mine, however, is (4in, 2out). I believe this explains why i am getting no volume from my headphones when i have the internal soundcard mapping on....

Any ideas on how i can rectify this?
Raymond Moguel
03.12.2009		I believe a video would def be of help!

I'm looking forward to it
Tamala Jurney
23.11.2009
Originally Posted by dfpoibv
Find attached a pic that shows the button to activate the crossfader (green). It
Brant Schleusener
21.11.2009		Find attached a pic that shows the button to activate the crossfader (green). It
Tamala Jurney
20.11.2009		Was no one able to shed some light for me??
Tamala Jurney
18.11.2009		Well guys...I've never considered myself such a nooob...but I'm completely lost. I've got two decks working...the cues are working...although I can't delete a cue...but no effects...no headphones...

Help?
Tamala Jurney
18.11.2009		Thanks very much Robin, and I will def keep taht in mind for my future posts.

I don't believe I'll go to buying another VCI 300 but I will definetly try out this mapping. Has there been a demo vid created yet?? I'm a visual person...haha. Thanks again.

Ryan
Kendal Blanc
18.11.2009		Hi Ryan,

I hope you
Tamala Jurney
18.11.2009		Hi all!! I am beside myself reading all this info regarding using the VCI-300 with Traktor. I bought it because I use SSL for my club gigs and wanted something for mobile/club gigs that don't have decks. I recently moved to Traktor Scratch Pro for club and since I really want to use the same library/playlsits etc, I thought I would have to get rid of my VCI 300.

Now on another note...I'm really up in the air about perhaps still selling the 300 and going with the 100 SE. I'm a house music dj and so effects are my forte more so that scratching etc. I never considered the 100 at the time because it didn't map with Serato. (it probably did but not as easily)

I'm def going to try out this mapping before I make up my mind...but I"m curious to hear your opinions.

Thx

Ryan
Kendal Blanc
16.11.2009
Originally Posted by cuttymello
If i press KEY LOCK on the right hand side to go to fx mode and then push the button CUE 2/ IN (second fx on) the led turns of and doesn
Ozell Cataldo
16.11.2009		Hey Robin,

great work appart from the known issues, like the scratch wich i don
Kendal Blanc
14.11.2009
Originally Posted by BentoSan
You should go back and update your first post with the latest mapping
Done!
Xavier Emanuels
13.11.2009		You should go back and update your first post with the latest mapping
Antionette Teofilo
13.11.2009		That's what I was doing and I was still experiencing the problem. I'll keep trying
Kendal Blanc
13.11.2009
Originally Posted by frostdude1
This is a dumb question but it when I go to import the tsi, it wont find it. Traktor itself has built in mappings but the VCI300 isnt in them. Is there a reason why it wont take the mapping I download from here ?
--> If you don
Kendal Blanc
13.11.2009
Originally Posted by tech tool
i've noticed a small bug
--> Fixed in the current mappings you find in post #2. Thx

Originally Posted by tech tool
also have you thought about having sync assigned to a button by itself rather than with shift? i've reassigned the sync and load buttons because i often like to hit play and sync simultanteously and that would mean pressing 3 buttons at once on your mapping - i've put load/syncload as one button and sync/phasesync on one button.
--> Exactly that was my mapping before. The reason for the current solution is that you know if you want to sync the track or not at the time you load it. That

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy