DJ TechTools' VCI-100 FAQ
Home :: DJ TechTools' VCI-100 FAQAdd new thread
| Threads | Posts | Last post |
| 28.08.2008 Replacement faders? | 3 | 29.08.2008 |
| So I had an accident involving half a can of beer and my SE the other week, not good! I took the SE apart and dried it out as best I could and all seems to be working OK for now... ..I've noticed that the left hand fader sometimes sends out false messages recently, eg the fader will be fully up… | ||
| 24.08.2008 Either laptop or soundcard? | 3 | 28.08.2008 |
| Hi all! Recently I bought a VCI 100 midi controler and am having problems with playing. The thing is, whenever I play a track it gets periodicly interrupted. I tried changing latency in both traktor and in software of my soundcard but it`s no use. I`m using an Acer aspire laptop: AMD Turion… | ||
| 27.08.2008 importants question before the upgrade!! | 2 | 28.08.2008 |
| hey guys i ahve a couples question before the upgrade with the VCI100s the monitor level the master and the monitor select are in the right hand top.......but in the VCI 100se in that place is the performance modes how u control the levels of the master levels,the monitors levels and the monitors… | ||
| 25.08.2008 minor problem | 3 | 27.08.2008 |
| just curious my vci1-100 (the first one) the platter kind is loose.It can push on and it moves a little to one side,do u tighten the scews on top to fix this?? | ||
| 13.08.2008 Help! My jog wheel has gone wobbly! | 6 | 19.08.2008 |
| Hi Guys, My left jog wheel on my SE seems to have got all wobbly. Any ideas? | ||
| 17.08.2008 Upgarde VCI 100 to SE edition | 4 | 19.08.2008 |
| How can i upgrade the firmware on my vci 100 so that the special edition tks files will work. | ||
| 18.08.2008 VCI 100SE Freezing??? | 8 | 19.08.2008 |
| My VCI 100SE locks up when I am using it (Traktor no longer responds to it), it happens at any given time and I have to unplug it from the computer then plug it back in to get it to work. I recently upgraded to Traktor 3.4 the Tech Tools v.1.3 tks, the hard drive to 200GB @ 7200rpm and the ram to… | ||
| 14.06.2008 SE Drum roll shorten skillz | 3 | 17.08.2008 |
| I'm probably being a bit of numpty, but I cant find the info, Is there a way to make the loop shorten more incremental... When I set a 4 beat loop from the SE, and then use the appropriate shorten loop button, when kept pressed the shortening seems very linear and shortens to the minimum loop… | ||
| 05.08.2008 can't deck copy to c in juggle mode | 1 | 17.08.2008 |
| i absolutley love the SE, i just cant seem to make the deck copy work from (a to c) and from (b to c) in juggle mode, i did a re-learn in traktor, and the settings seems to be all right, anyone know this problem? | ||
| 15.08.2008 View controls of Vci100SE in the dark | 6 | 17.08.2008 |
| Hi all, did my first gig with the VCI100SE 2 days ago all went well but i found it hard to view my controls on the vci, there was minimal light were i was setup and after a wile it was getting difficult to see were my knobs are set at. does anyone have a simple solution to this? i know i can… | ||
| 14.08.2008 the "soft buttons" | 6 | 16.08.2008 |
| does the vci-100 se have the "soft buttons" instead of the "hard ones" that the original vci has? where could we get the new "soft buttons" ? does vestax carry misc peices from the vci? | ||
| 13.08.2008 fader problems | 1 | 15.08.2008 |
| hello, i have a bit of a problem with my left fader of my vci-100se, when i glide it up to 100%, traktor goes a bit crazy and he gives my values on the screen like 50%,40%,60%. if i move my fader just a tiny bit down, then it goes well and i get the 99% fader volume in traktor is this because… | ||
| 14.08.2008 Assign inner jog wheel to do pitch bend as outer??? | 1 | 15.08.2008 |
| Hi Guys Can someoone please help me to assign the jog wheel which is used for scrathing in my current .tks file to the same function as the outer part of the jogwheel that is used for pitch bending ie I want to use the entire jog wheel (inner + outer) just for pitch bending as on a… | ||
| 15.08.2008 so i was practicing an this happened wtf?? | 3 | 15.08.2008 |
| can anybody help me out.. I was messing around with traktor and now for some reason when i have the slider in the left side i can still hear the right side wtf.... i tried moving around the channels on traktor but for some reason i cant get it to work help.. | ||
| 12.08.2008 Silver VCI-100 SE | 8 | 15.08.2008 |
| Hey Ean, The black VCI 100 is cute and all, but I like the silver. Any plans to produce silver VCI 100 SEs? Cheers... | ||
| 03.07.2008 Second Batch VCI100 SE's | 77 | 14.08.2008 |
| Has anybody who bought in the second batch received an email from Vestax with their tracking number yet ? I was hoping to have heard something by now. | ||
| 04.08.2008 Engaging Modes, Play Disabled | 8 | 08.08.2008 |
| I'm not sure what I have done here, but for some reason my play buttons don't work and when I load a track and just touch the platter the track starts playing. The play buttons will not stop the track from playing. Please tell me it is a simple solution. Thanks. | ||
| 07.08.2008 How to set up VCI-SE in Ableton 7?? | 3 | 08.08.2008 |
| Hi guys, I bought Ableton Live 7 last week and would like to know hot to map and set up the VCI-SE in Ableton and what to map where. for i.e. how to play tracks, pre-listen, use FX etc I'll be using ableton for DJ use only, Please help. Thanks | ||
| 10.06.2008 NEW VCI-100 PLATES or WRAP? | 1 | 07.08.2008 |
| We are getting closer to the completion of our upgrade package and wondering which you would prefer: plates or a wrap? plates: new black or silver(?) plates that list all the functions of the vci-100se firmware. wrap: a custom wrap from style flip that wraps any VCI-100 in black and… | ||
| 05.08.2008 recording on traktor ?? | 1 | 06.08.2008 |
| how do I go about recording my mixes ..... I know its kinda dumb but I cant figure it out ...haha.. | ||
| 01.08.2008 Large Crossfader needed | 5 | 05.08.2008 |
| Hey guys, I was looking to see if someone can point me in the right direction. I'm looking to swap out my normal cross fader with one twice it's size or similar to Ean's in his superssfader video. I don't want to open the unit, just slip of the old and slip on the new. Is there a crossfader out… | ||
| 28.07.2008 Taking the VCI-100SE apart/Custom case | 2 | 05.08.2008 |
| Ok...so I posted this on the "platters" thread and didn't get a response. I am FAR from the best when it comes to taking things apart. However, I see in the community that I need to take my VCI apart to tighten up my platters as several of you had to do. First of all I'm scared. I'm… | ||
| 04.08.2008 Soundcard recommendatio to use eith VCI | 6 | 05.08.2008 |
| Hi All I am currently using a Audio DJ 8 soundcard with my VCI-SE. What other better soundcards would you recommend as I feel that I am not getting the quality sound I want as with an anologue mixer. Thanks | ||
| 27.07.2008 performance mode button problem | 3 | 30.07.2008 |
| Hi folks got my se and it's incredible I have noticed 1 small prob, the deck c and fader fx modes don't engage when I hold down the 2 small buttons. Juggle mode works fine when I hold that button down. All modes engage when I rotate the pots. I'm using Eans latest cdj1000 .tks on an iMac with… | ||
| 30.07.2008 Need help getting functionality | 3 | 30.07.2008 |
| I'm lost, I installed the Traktor 3LE disc that came with my VCI-100SE and updated to 3.3.2 (the newest I assume). Then I downloaded the VCI-100SE tks files from the community sticky; however, it seems with the LE version you can't load tks files or something. I registered a copy of the full version of… | ||
| 23.07.2008 Just got my VCI-100SE...a couple of things... | 7 | 29.07.2008 |
| I just ended up going to my post office to pick up my VCI-100 SE. There wasn't a note on my door or anything...and they found it. So that was cool. Paying another $30 for Customs Fees and Delivery Charge (?) wasn't...but such is life. The VCI-100 is actually heavier than what it looks… | ||
| 28.07.2008 BPM not syncing correctly | 1 | 28.07.2008 |
| I have two tracks both about the same bpm. One is a 4/4 beat and the other is more breakbeat but still keeps the 4/4 time. When trying to sync the two tracks Traktor automatically slows the breaks track all the way down to -26 pitch. I have no idea what happened. If this were wax I could match… | ||
| 28.07.2008 Serious Platter Problem (heellllp!) | 2 | 28.07.2008 |
| Ok...either this is something simple or something major I screwed up. So as I said in a couple of other posts that I was scared to go inside of gear because my hands aren't gentle. Well, I finally got inside of my VCI and "seemingly" was able to sucessfully stabalize my platters… | ||
| 26.07.2008 VCI-100SE & M-Audio 410 Question | 4 | 27.07.2008 |
| Is anyone using this setup and if so how do you have the headphones setup with your vci? I can't seem to figure it out? | ||
| 12.06.2008 Some buttons are not lighting up | 7 | 24.07.2008 |
| Some of the buttons on my unit are not lighting up when pressed. Both Key, Loop and Cue buttons, as well as the Performance Juggle button will not light up when any performance know is turned to the right. From the instruction video I noticed that the middle deck button and the 4 effects buttons… | ||
| 22.07.2008 VCI-100SE : The Arrival | 0 | 22.07.2008 |
| Finally! The VCI-100SE has arrived at my door! For those of you that weren't able to get your hands on this limited piece of dj gear, I thought I would shoot some video of what the package looked like before I opened it. Enjoy! http://www.youtube.com/watch?v=Yp-L90hs6ok I've got video… | ||
| 09.06.2008 Cue Points | 5 | 22.07.2008 |
| Is there a way to set the 5 cue points on a song with the VCI itself, or does the VCI only play the cue points? | ||
| 21.05.2008 Anyone got their SE yet? | 119 | 22.07.2008 |
| im just really excited and i live in nz so im prolly gonna get mine a little after everyone else. but itd be kool to know if anyone has got theirs yet so i know how far away mine is chur! | ||
| 21.07.2008 VCI-100 SE Efx | 3 | 22.07.2008 |
| In the video link below, Jazzy Jeff (1 of my heroes) is using the delay on the Pioneer DJM-909 DJ mixer. On that mixer (and Serato), the delay effect still works with the fader volume down which is how he's doing the trick @ the 1:47 mark in the video. He just drops the fader volume (in and out)… | ||
| 09.07.2008 Traktor skipping... | 4 | 11.07.2008 |
| Hey guys I'm having a bit of a problem. Traktor 3 keeps skipping when I'm playing. I don't believe it is the drivers that i'm using or the audio card.. I'm using: VCI-100 SE M-Audio Fast track Pro The laptop is a core 2, 1.66 ghz with 2gigs of ram.. Is the laptop not powerful… | ||
| 17.06.2008 VCI-100SE user reviews..what do u think? | 7 | 09.07.2008 |
| Now the dust settled after the first batch lucky people have received their spanking new SE's, I thought it would be very and interesting to start a a thread so those with hands on experience can say what they believe of their new VCI-100 Ean Golden Special Edition... my take: For me in just one… | ||
| 28.06.2008 eBay auction VCI-100SE Arcade Buttons | 10 | 08.07.2008 |
| Arrrggggg!!! This is killing me - The notification for the sale of the final 9 VCI-100SE units hit my inbox at 8:30pm last evening (UK time) at which point I was... down the pub! DAMN! Got home at midevening , saw the email from DJTT, panicked, replied and woke up to a message this morning informing me… | ||
| 31.05.2008 The New VCI-100 SE Header Is Cool!!! | 13 | 06.07.2008 |
| I Like The New Site Header | ||
| 24.06.2008 wobbly/loose volume fader vci-100 se | 6 | 05.07.2008 |
| hi all, I have a vci-100 se and I love it to death.. I have noticed though that my left volume fader/slider is a fair bit looser then the right one... I am no device expert so I was wondering if it would be possible to tighten this up with a screw somewhere or would i have to take bits off and… | ||
| 06.06.2008 need some help | 7 | 04.07.2008 |
| ok , go easy on me guys , This (vci 100 se) is my first peice of gear ever! lol besides adobe audition .......ANywho im confused about traktor LE and traktor 3 , 3.2? , 3.3 , .......i read a while ago about the vci-100 se not being compatible with Traktor LE , but when i got my Vci-100 se it… |
<< Back to forum homeAdd new thread