Upgrade Issue !
Upgrade Issue ! Posted on: 10.11.2009 by Camelia Busbin Hi everybody !I have tried to upgrade my VCI 100 1.1. AND... I have the 15024 Error number : Boot failed. - 1 So, First when I make the workflow I put the VCI in boot mode. BUT, There are no lights on. Is this step good or Should it be flush? - 2 After, I launch my upgrade with a usb/serial cable on an opened Com (COM 5 for example). And I have the error (see above). So I have tried to unplugg the firmware from the VCI, and to unplugg the firmware kit and to lauch the soft with just the usb/serial cable : And I have the same error ! So I don't know where does come from this issue... Could you try with your cable alone to compare results? I am lost ... Thanks ! | |
| Camelia Busbin 10.11.2009 | Hi everybody ! I have tried to upgrade my VCI 100 1.1. AND... I have the 15024 Error number : Boot failed. - 1 So, First when I make the workflow I put the VCI in boot mode. BUT, There are no lights on. Is this step good or Should it be flush? - 2 After, I launch my upgrade with a usb/serial cable on an opened Com (COM 5 for example). And I have the error (see above). So I have tried to unplugg the firmware from the VCI, and to unplugg the firmware kit and to lauch the soft with just the usb/serial cable : And I have the same error ! So I don't know where does come from this issue... Could you try with your cable alone to compare results? I am lost ... Thanks ! |
| Adolf Hit 11.11.2009 | Probably a flakey driver... Glad you got it sorted |
| Camelia Busbin 10.11.2009 | OK problem solved : It works fine with my usb/serial. The issue was coming from the alimentation. In fact, when I tried with my Macbook usb port (who knows my vci) it was not ok. Then I tried with the PC usb port and it was ok. 2 solutions : The voltage is higher? OR The PC has never instaled the vci so the voltage was not the same ??? Bye |
| Camelia Busbin 10.11.2009 | Thanks for your responsiveness ! I did exactly the procedure that ean says in the video but a pop up says that a vci with no lights is not good... So what is the good thing : No lights or flush? Thanks for all |
| Adolf Hit 10.11.2009 | Follow the video closely and read the FAQ very carefully. Many people have issues with USB serial so it may pay to find a computer with a built in serial port and use that. |
<< Back to DJ TechTools' VCI-100 FAQReply