FAQ- How to buy the Black VCI-100 SE

Home :: DJ TechTools' VCI-100 FAQ :: FAQ- How to buy the Black VCI-100 SEReply
FAQ- How to buy the Black VCI-100 SE
Posted on: 04.06.2008 by
During July 2008 Vestax manufactured a limited run of the VCI-100 special edition controllers for Dj TechTools. The controller was black with a custom designed 1.3 firmware mapping that gave users unique control over Traktor 3. The controllers sold out in the 2nd day the store was open and will not be manufactured in that original configuration again.

About 3 months ago we started selling black VCI-100's in our webstore that have been updated with firmware version 1.3 and come with our custom VCI-100 overlays installed.

There is now a dedicated Midi Mapping page with all information that you need on the VCi-100SE and our publicly available mappings here.
Xavier Emanuels
09.06.2009
Originally Posted by r0bust
Oh yea could we buy the SE with prepaid mastercards?
Yes you can, just go though the checkout and you will fine
Edelmira Baggot
09.06.2009
Originally Posted by EanGolden
During July 2008 Vestax manufactured a limited run of the VCI-100 special edition controllers for Dj TechTools. The controller was black with a custom designed 1.3 firmware mapping that gave users unique control over Traktor 3. The controllers sold out in the 2nd day the store was open and will not be manufactured in that original configuration again.

About 3 months ago we started selling black VCI-100's in our webstore that have been updated with firmware version 1.3 and come with our custom VCI-100 overlays installed.

There is now a dedicated Midi Mapping page with all information that you need on the VCi-100SE and our publicly available mappings here.
When is the new batches coming?
Kathyrn Fresco
03.05.2009
Originally Posted by Mackee
Hi Ean,

Thanks for all the great work you have done on the controller. I am anticipating my own VCI-100 SE. I read that if i purchase it from you i get the upgraded jog wheels, firmware and overlay. Does it also include an upgraded cable to work with the firmware?

Looking forward to the release!
Why would you need the cable if they already upgraded the firmware for you?
Sherita Lazarev
17.11.2009
I am waiting for the VCI 100 SE back in stock ? When do u have it back ?
Matt Kane
25.09.2009
ah! when will the vci se back in stock? right now i have some money left, but not for long. hurry up!
Gregory Finely
14.09.2009
Any of the Arcade ones in stock I do believe i'm going to be needing a new VCI lol
Shaina Condley
23.08.2009
When is it available again?...any confirm dates?...Its still sold out atm...

New Guy
Mladen Glavinic
25.06.2009
BentoSan,

Any news as to why they've been taken out of the store???
Adrien Avinger
19.06.2009
hi ean i'm fabrizzio mora maggio from chile, and i recently order a vestax vci 100 SE and some cables thru you website... and i just wanna know when i'm gonna get the product ... !! i so impation to have it .... thanks a lot
Louetta Seehorn
19.06.2009
Just tried purchasing the SE, but it's unavailable? I signed up on the list a while back, but never got an email that it was in. Am I SOL?
Xavier Emanuels
09.06.2009
Originally Posted by r0bust
Oh yea could we buy the SE with prepaid mastercards?
Yes you can, just go though the checkout and you will fine
Eldora Boxberger
09.06.2009
Oh yea could we buy the SE with prepaid mastercards?
Edelmira Baggot
09.06.2009
Originally Posted by EanGolden
During July 2008 Vestax manufactured a limited run of the VCI-100 special edition controllers for Dj TechTools. The controller was black with a custom designed 1.3 firmware mapping that gave users unique control over Traktor 3. The controllers sold out in the 2nd day the store was open and will not be manufactured in that original configuration again.

About 3 months ago we started selling black VCI-100's in our webstore that have been updated with firmware version 1.3 and come with our custom VCI-100 overlays installed.

There is now a dedicated Midi Mapping page with all information that you need on the VCi-100SE and our publicly available mappings here.
When is the new batches coming?
Edelmira Baggot
10.06.2009
Hi when is this going to be available to ship?
Eldora Boxberger
30.05.2009
Yeah, I'm also believeing about buying a VCI-100 SE too but wondering how much it will cost in total with the customs and shipping fees and such. Can anyone tell me how much would it be to ship one to Canada(Manitoba)? Since the canadian dollar is 0.917 for 1 USD it'll sure make a difference in the price.(Used to be 0.81 a month ago)

Or is there anyone kind enough that's canadian that has bought a vci 100 se from djtt to share their total spending for one so I'd have a closer idea of the total ammount.

thanks in advance if someone replies! =)
Elijah Polski
29.05.2009
giorgio1712:

This was my reciept:
1x Vestax VCI-100 (Black) for $549.00 each

Subtotal : $549.00 USD
Tax : $0.00 USD
Shipping : $57.23 USD
Total : $606.23 USD

This was the fastest shipping option, there was a cheaper one of around 40 USD.
Taxes will come afterworth i believe from your country's customs...

I'm from Belgium so the shipping costs will be about the same for you i guess.

Don't have more info since mine hasn't arived yet.

Greetz
Cristine Stele
28.05.2009
Hi im looking to buy the VCI-100SE, was just wondering shipping prices to the Channel Islands in the UK any one know where I can find them out?

Also the country I live in doesnt charge VAT so does anyone know if this will this be taken off my order?

Thanks
Elijah Polski
06.05.2009
Hey there,

I just got intrested in DJing just for the fun of it at home, been producing some small stuff with Reason some time ago...
I wanna use Traktor Pro with the VCI-100, now i would like to get started with the vci offcourse

I wonder is the VCI-100SE back in stock in a week or 2 like it states in the store webpage from djranking s? Or is that just an old message maybe...
Just so i know if it is worth waiting for to get my VCI here on DJranking s or that i best buy the 1.2 firmware here in Europe if i want to get started within this month...

I'm hoping for some good news here offcourse


EDIT:

Mmmmm i pre ordered mine ! Can't wait till july when i'll recieve it
Kathyrn Fresco
03.05.2009
Originally Posted by Mackee
Hi Ean,

Thanks for all the great work you have done on the controller. I am anticipating my own VCI-100 SE. I read that if i purchase it from you i get the upgraded jog wheels, firmware and overlay. Does it also include an upgraded cable to work with the firmware?

Looking forward to the release!
Why would you need the cable if they already upgraded the firmware for you?
Nick Ross
13.04.2009
Yeah, and I believe this needs to be it's own thread.
Ivan Gisclair
13.04.2009
hey guys im a new member 2 this community any i need help . well here it goes"
i currently have a pair of the
-new denon dn-s 3700
- vestax 07 pro witch is a two channel battle scratch mixer
i really love the whole 4 deck set up, and was looking at the vci 100
to control the other 2 decks via midi.

my questions are: 1) is using traktor scratch with the 3700's on cd time code(on 2 decks) and vci-100 on the other 2 decks via midi, the best way to set it up? or is midi the best way for both the 3700's and vsi-100? the only down side to midi i can see right now is the platters not being supported yet.

2) with the traktor sound card will i be able to use the above set up with my a two channel mixer? i dont know how it all connects , my 07 pro has two channels and a session in (input) what i dont know is if the vci-100 coming out of the audio 8 s.c. will need one channel or two. if one is needed then i can probably hook it up in the session in input.

can anyone help me , this can really save me time and money.
dan samo
11.04.2009
When are the next batch of VCI-100SE's coming into stock? Would love to buy one .
Rima Deaguiar
22.03.2009
Hi Ean,

Thanks for all the great work you have done on the controller. I am anticipating my own VCI-100 SE. I read that if i purchase it from you i get the upgraded jog wheels, firmware and overlay. Does it also include an upgraded cable to work with the firmware?

Looking forward to the release!
Kristy Winninger
20.03.2009
Hi Ean, I have an original VCi-100 with the first firmware. Will I be able to use this sticky with your mapping or will there be problems? I also want to order the black buttons. Please let me know so I can proceed with the purchase.

Cheers
Leona Baliey
26.02.2009
Will these be available again in the near future??
If so, I'll be getting one ASAP.
MadMan Ajms
14.02.2009
Originally Posted by sleaztek
hey guys....im new here & i got the vci 100 and the vci 300 as well....i was wondering when will the upgrade software package will be availble.....i love my vci 100 but i realy want to use the 300 with traktor....
Not to sidetrack this thread but,
I am hoping to for a VCI-300 conversion package as well. I would like to see the jog wheels same midi info outs like on VCI-100 (up/down and with top metal platter/move, for scratch mode).
A silver do it your self label face plate would look nice.
team DonX
01.09.2008
Originally Posted by eangolde
...there will not be plates but overlays...
Ean!
Why have you chosen overlay and not plates?
Cole Christensen
13.08.2008
hey guys....im new here & i got the vci 100 and the vci 300 as well....i was wondering when will the upgrade software package will be availble.....i love my vci 100 but i realy want to use the 300 with traktor....
team DonX
13.08.2008
Originally Posted by eangolde
there will not be plates but overlays
Why plates?
Look this: http://www.djranking s.com/community /showthread.php?t=420
Plates win!
Now my question is: Why will you sell only wrap? The pool says that plates win...
Nor Muazam
12.08.2008
Will there be silver/grey overlays as well as the black ones?
Roberto Carenzi
12.08.2008
But will you be releasing the firmware upgrade kit earlier than the overlays or will it all be released at once??

12.08.2008
Upgrade kits are coming soon- there will not be plates but overlays which will look and feel much better. just testing the overlays now to make sure we use the very best material and adhesives so we know 100% that you will love them. We are putting in the order this week and then they take about 4 weeks to manufacture. So look for them to be up for sale next month.
mohammed farhan
12.08.2008
To Install the plates is easy as pulling knobs upwards and getting your screwdriver ready.
Red Sonya
06.08.2008
Greetings from Belgium

All the same things as above, just bought a vci-100 and now waiting for the upgrade kit

Will it be difficult to get those plates on?
ziad sarhan
05.08.2008
Greetings from the UK

Have been clockin your site for a few months now, and have decided to buy a vci-100 over all of the other contenders

PLEASE tell me you will be shipping the upgrade kit to the UK

Hope to hear from you soon

05.08.2008
the problem is getting the firmware updated. We just finished making some firmware update cables and they should be here ready to sell in a few days. Then people can start updating the firmware.
Hannes Deburchgraeve
04.08.2008
I hope I'm not being a pain, but I thought I'd throw out the idea of perhaps releasing the Firmware and perhaps we could pay for extra for shipping the plates separately? Just an idea.
Nor Muazam
03.08.2008
Kool, keep us updated, thanks brotha!

03.08.2008
Hey Guys, the upgrade package will be ready in just a few weeks. We hit some snags because the quality of the overlays was not up to DJTT standards. So it was back to the drawing board to find a new solution.

We have now found one that will make your vci-100 look and feel like a OEM SE out of the box! Its just going to take a few weeks to make.
Nor Muazam
02.08.2008
Yes, I've also been checking this site often. What's the dealee yo My first post hello all. I've been scoping out these controlers for awhile and I am torn between one of these or a Faderfox, A&H 1D

<< Back to DJ TechTools' VCI-100 FAQReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy