Download the VCI-100SE Mapping (3_6_3)

Home :: DJ TechTools' VCI-100 FAQ :: Download the VCI-100SE Mapping (3_6_3)Reply
Download the VCI-100SE Mapping (3_6_3)
Posted on: 23.09.2010 by
DOWNLOAD 3_6_3

Requirements
  • You must have Traktor 1.24 or later to use this file otherwise it will not import properly.
  • This file is compatible with firmware 1.2/1.3/1.4


To Load this file

  • Select the BIG import button in the lower left hand corner of the preferences tab
  • If this is your first time loading the TSI file, please load it 2 TIMES for the fx to load properly.
  • The 1st and 2nd time you run Traktor after importing this TSI file, the controller may lock up in fader fx mode. Just quit and re-open the program twice and the issue should go away.


What Settings to Load

  • MIDI: Everyone
  • EFFECTS: Everyone (please load this file twice if you are using it for the first time to load the FX properly)
  • LAYOUT: Only if you want the layout to change when switching decks from A/B to C/D. To customize your own, modify the layouts in position 1 and 3.
  • ALL OTHER SETTINGS: Import these if you want the Pitch fader to be set to 8%, and for deck copy to work perfectly.


WHAT CHANGED?


  • Added support for the high res faders and jogs in firmware 1.4
  • Changed Play to "Re-Play" - Use Shift + Play to Play/Pause.
  • FX preset #4 is improved
  • simplified the FX presets in the effect section (4 knobs and buttons)
  • Removed outside pitch bend in CD-JOG mode (use this mode in vibration heavy clubs)
  • Modified the delay parameters of the ECHO function
  • Pitch Bend sensitivity increased
Sherryl Dvorscak
06.10.2010
Originally Posted by Michler
I have a glitch problem (since 3.6.3 and fw 1.4) when I use the juggles's and shift buttons
can you help me?
I believe its an Win7/64bit problem... no problems with WinXP/32bit
Leeanna Ayla
05.10.2010
Finally got around to loading 3.6.3 play/pause today

Originally Posted by Ok
Odilia Gatica
03.10.2010
I have a glitch problem (since 3.6.3 and fw 1.4) when I use the juggles's and shift buttons too!
Chu Sukalski
02.10.2010
Originally Posted by Michler
I have a glitch problem (since 3.6.3 and fw 1.4) when I use the juggles's and shift buttons
can you help me?
i have the same problem here
Lupe Shehee
01.10.2010
I am getting the Shift filter for Key bug, when I press it, it will not go down past the center point but it will go up to full. I keep turning the knob but it stops at the center point and switches off key for the track. So to get it all good again I have to mouse onto the key button twitch it back on and then manually center it on the screen as the point it turns itself off leaves the key dial just above the center point. I have reloaded the mapping several times and restarted traktor as well. Good work fellas its almost perfect ;-)
Sherryl Dvorscak
01.10.2010
Thanks man
Leeanna Ayla
01.10.2010
Yes

http://djranking s.com/community /showthr...d=1#post161079
Sherryl Dvorscak
01.10.2010
Can I downgrade back to fw 1.3 ?
Tonya Lende
01.10.2010
i want the fw 1.3 back.

where can i download it??
Aprizal Rustarmadi
01.10.2010
i liked the chained fx presets in 3.5.2. if i remember correctly, shift + fx button loaded that effect first and two complementary effects in the 2nd n 3rd slot but it didnt preset any parameters.

i love the way pressing the small fx preset buttons + headphone cue twice loads both the chained fxs and a pleasing parameter for each.

i hope a tsi is created that will load a series of chained fx (like in 3.5.2) + a nice preset parameter value when shift + fx button is pressed twice.

just wishing... sure is easy for me to ask someone (flashflooder) to make one but headaches from hell for most of us to try and create one. sorry i am working to improve my mapping skills though!
Jodi Lacerra
30.09.2010
Originally Posted by dj-rob69
Can you tell me how to modify the re-play. I dont what to keep having to hold the shift down to pause the track.
please see my post on the previous page, post #13.
Ebonie Klym
29.09.2010
Can you tell me how to modify the re-play. I dont what to keep having to hold the shift down to pause the track.
Sherryl Dvorscak
30.09.2010
I have a glitch problem (since 3.6.3 and fw 1.4) when I use the juggles's and shift buttons
can you help me?
Danae Dumler
29.09.2010
Originally Posted by flashflooder
As for the simplification of the effect section Chained FX presets, this is a change Ean wanted to make it more straight forward. When you press it now, it only loads the printed effect into that specific chained effect slot (eff1 for both Reverb and FilterLFO).

The previous chained effects combinations are still listed in the Walkthrough pdf; however, if there is enough support for a switched back version I'll modify one and put it up.
I would support a chained version, but I'm sure it already feels like you're proliferating tsi's more than you want to; if nobody else is into this I can most likely figure it out myself using the combos listed in the walkthrough document. But it might be a good idea to have a web page with links to various tsis for this firmware, as long as it's pretty clear what is different in each tsi.
Jolyn Brunello
29.09.2010
haven't tried the fader fx yet though.
Jolyn Brunello
29.09.2010
just upgraded and i now understand about the effects.so ignore the other 2 posts.i like the slight changes.performs loads better.thanx again dave and mega props to flashflooder and whoever else was involved in making this available as quickly as you did!!!!!!!
Kristeen Braham
28.09.2010
The version of 3.6.3 where play/pause is back where it should be has a bug in it. At least in the tsi labelled PC, haven't tried the MAC one.

Using the slice or echo buttons causes Fader FX to disable itself and makes the volume faders and the jogwheels do nothing at all until you hit the Fader FX button again to turn it off (making scratching and volume control work) and on again (to reenable Fader FX).

I'm also still getting audio glitches by hitting the FX Type and Shift buttons.
Jolyn Brunello
28.09.2010
sorry just read about the walkthrough pdf.
Jolyn Brunello
28.09.2010
would much prefer the presets.1,because you have an effect ready to use.2,for people like me who are not too confident with the mappings and would like to change them and set the parameters by finding them in the tsi.hope you can deliver flashflooder.
Leeanna Ayla
28.09.2010
Originally Posted by ariser
Does this tsi work with both pc and mac as the 3.6.3 had a seperate for both

The tsi isn't OS dependent.
Kristeen Braham
28.09.2010
Originally Posted by flashflooder
Ok, due to popular demand, attached as the bottom is the latest VCI-100SE mapping (3_6_3, although I still have them all named 3.6.0 in the tsi's) with the Play button switched back to PLAY/PAUSE and Cue Play back to the Shift+Play function.
Thank you very much.
Shala Wohletz
28.09.2010
Originally Posted by flashflooder
Ok, due to popular demand, attached as the bottom is the latest VCI-100SE mapping (3_6_3, although I still have them all named 3.6.0 in the tsi's) with the Play button switched back to PLAY/PAUSE and Cue Play back to the Shift+Play function.



As for the simplification of the effect section Chained FX presets, this is a change Ean wanted to make it more straight forward. When you press it now, it only loads the printed effect into that specific chained effect slot (eff1 for both Reverb and FilterLFO).

The previous chained effects combinations are still listed in the Walkthrough pdf; however, if there is enough support for a switched back version I'll modify one and put it up.
Does this tsi work with both pc and mac as the 3.6.3 had a seperate for both
Jodi Lacerra
28.09.2010
Originally Posted by djproben
+1. Is that what is meant by "# simplified the FX presets in the effect section (4 knobs and buttons)"? If so, can we have a tsi that leaves it as it was? I really liked being able to set a combo with these buttons; I guess it's easy enough to fix though but is that the expected behavior?
As for the simplification of the effect section Chained FX presets, this is a change Ean wanted to make it more straight forward. When you press it now, it only loads the printed effect into that specific chained effect slot (eff1 for both Reverb and FilterLFO).

The previous chained effects combinations are still listed in the Walkthrough pdf; however, if there is enough support for a switched back version I'll modify one and put it up.

Originally Posted by Ok
Kristeen Braham
27.09.2010
Please make replay shift+play instead. I'm so lost now.

Or at least tell me what exactly to change, all this stuff about modifiers and things in the configuration window in Traktor just makes my head spin.
Danae Dumler
26.09.2010
Originally Posted by DjHawkeye
Shift + FX Bank button doesnt work. Not loading 3 effects, only the first effect.
+1. Is that what is meant by "# simplified the FX presets in the effect section (4 knobs and buttons)"? If so, can we have a tsi that leaves it as it was? I really liked being able to set a combo with these buttons; I guess it's easy enough to fix though but is that the expected behavior?
Corey Holm
26.09.2010
Shift + FX Bank button doesnt work. Not loading 3 effects, only the first effect.
Britany Stonerook
26.09.2010
my pitch bent doesn't work :-( with the new update..
Eneida Mussa
25.09.2010
I have most things working great however there is a problem with the shift + key.

When you shift + key down to the lowest point it will reset and key off. This doesn't happen when you go up. This is very annoying as you have to make sure you don't go all the way to the bottom.

Any ideas as I have tried to find and change bits in the mapping but to no avail.

Thanks
Freeda Chinnis
25.09.2010
Originally Posted by MaxOne
Re pause/play button, would it be possible to have the far right button act like play/pause only when the button next to it (cue) is pressed?

ie you can be holding down cue and then hit play/pause to let it carry on. But if you're not holding down cue, it acts like cue/play.

hope that makes sense, that'd be the very best of both worlds imo.
That would be a good solution. Now I need two hands to use normal play/pause at my right deck.
Shala Wohletz
25.09.2010
Id love to see the play button as pause/play too how would i chnage the mac tsi for this ?
Hipolito Scionti
24.09.2010
Re pause/play button, would it be possible to have the far right button act like play/pause only when the button next to it (cue) is pressed?

ie you can be holding down cue and then hit play/pause to let it carry on. But if you're not holding down cue, it acts like cue/play.

hope that makes sense, that'd be the very best of both worlds imo.
Freeda Chinnis
24.09.2010
Just got my VCI like an hour ago. Mapping is almost perfect, but why not a normal play/pause?
Jodi Lacerra
23.09.2010
Originally Posted by photojojo
is this different than what was posted when the new firmware was posted?
EDIT: THE MAPPING ZIP FILE HAS BEEN UPDATED. PLEASE RE-DOWNLOAD IT IF YOU D/L'ED IT BEFORE THIS POST. Some minor changes were made to this mapping from the originally posted v3.6 mapping that have fixed a few bugs and changed a few things. Please see the first post in this thread for "What Changed?".
Leeanna Ayla
23.09.2010
is this different than what was posted when the new firmware was posted?

<< Back to DJ TechTools' VCI-100 FAQReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy