VCI-300 and Traktor 3 (basic mixing)
VCI-300 and Traktor 3 (basic mixing) | |
| Andriy Gavrysh 26.12.2008 | yep, i'm sure if you push the jog then you will get one midi cc message, if you just touch the platter so the light turns red (without moving the jog!), then you'll get a midi note which is different from the cc message. i don't use the jogs for scratching, but i use them for fx, i assigned the midi messages so that if i touch the platter then the effect gets turned on and by moving the jog i can change the fxs depth. |
| Felix Harrer 26.12.2008 | Are you sure about that? My vci-300 only gives 1 midichannel on the jog? When i give scratch on and scratch the same midichannel it wont work well. |
| Andriy Gavrysh 25.12.2008 | don't use a button to turn on scratch mode, instead use the midi note when you just grab the jog. the jog sends out 2 midi messages: one midi note when you touch the platter and one cc message when you turn the jog. use the midi note when you touch it to turn on scratch mode and then use the cc message for scratching, then it'll turn off automatically when you release the jog. |
| MadMan Ajms 25.12.2008 | yes, I had a problem with trying to gt Scratch to work like Itch. I had one button set to turn on Scratch Mode. and set Scratch to he Jog Wheel, but once it is ON , it stops the track like said above. What are the best settings you have ? I noticed in Ean's VCI-100 /TRaktor Pro Is Sick video, scratch works ok. Anyone can share these settings to implement them in my TSI for VI-300? |
| Andriy Gavrysh 25.12.2008 | it is definitely possible to scratch in traktor (although my personal opinion is that the vinyl feeling in itch is much better than it will ever be in traktor). which mapping do you use for your vci? to me that sounds like a problem with your mapping! |
| Yolanda Mounce 25.12.2008 | Hallo, i use traktor pro with the vci 300 and the asio drivers. It works nice! thank you for the support on this side… Is it possible to play the sounds in traktor pro like vinyl style in Itch? I mean, wenn I scratch the track on the jogweels and take my hand from it, I want that the track continue to play, but the track stop |
| Maddie Lagrasta 24.12.2008 | Ppl i have a problem in traktor pro.. Some tracks that have the pitch at 125 when a put in the deck change to 65.. How i resolve this problem? |
| Maddie Lagrasta 23.12.2008 | Thanks!!! =) Merry Christmas to you all |
| MadMan Ajms 23.12.2008 | Here is the latest VCI300 & Traktor Pro TSI I am working on.. enjoy DDTT users. -I need help..anyone can get the led lights of the effects(off -position) when the effect button is off (FILES) is on,would be great.. added SHIFT + LOW BASS knob controls the loop amount as well..one can adjust using the buttons or knob. enjoy & Merry Christmas http://www.sendspace.com/file/fnyhzo |
| Thiago Dariel 23.12.2008 | 2 Morbido Tried - does not help. The program itself then transfers a file to a folder placed in a directory "my documents". It is necessary to change somehow a way on which program keeps files of options. |
| Andriy Gavrysh 23.12.2008 |
Originally Posted by l2net
|
| Maddie Lagrasta 23.12.2008 | Weee! Thanks men =) |
| MadMan Ajms 23.12.2008 | yes, it will be online later today. I am making a few small updates. |
| Maddie Lagrasta 23.12.2008 | Claudek can you share yout .tsi file? |
| Thiago Dariel 22.12.2008 | Forgive for my English! At me a problem similar described above. If to put vci-300_2.bmte in a disk root - a problem does not vanish. Similar the program understands symbols of the English alphabet... Change of a place of storage of a file vci-300_2.bmte from a folder "my documents" on other folder (it is admissible on a folder in which is established the compiler) is a variant of the decision of such problem. Help council please! 1: Error loading project file: C:\Documents and Settings\ |
| remy deroche 19.12.2008 | traktor pro uses .tsi files not .tks files |
| Christina Pauda 18.12.2008 | I downloaded the demo version of tracktor scratch pro and I am getting this error message when trying to import the TKS file :Import of controller settings file from previous version of traktor is not supported Any idea what could be the issue? do you guys have a new TKS file for this version of tracktor Thanks |
| Andriy Gavrysh 15.12.2008 |
Originally Posted by fon84
my guess is that this will fix the problem! |
| Lane Allerdings 15.12.2008 | hi all,when i try to load the .bmte file on the mini.translator i have the next error: 1: Error loading project file: D:\Documents and Settings\Goñi\Mis documentos\mini.Translator\vci-300_2.bmte anyone knows what's happening? thank you |
| Felix Harrer 13.12.2008 | Should work if you go advanced in the reply and use a available filetype... |
| MadMan Ajms 12.12.2008 | cool..check it out.. how did you attach the file? I try every time and it does not go.. |
| Erminia Kautzmann 13.12.2008 | Hi, this is my TKS mapped for VCI 300, fully working except the Dj-Jog (I need Help!) |
| MadMan Ajms 12.12.2008 | what version u running? |
12.12.2008 | Does anyone else have problems with the right auto loop button not working in itch?. the one from the rigt deck works just fine, you press it , it lights up, it remains lit and the loop starts, but on the right deck it does nothing. it only lights up when I press it, but then nothing, no loop... |
| MadMan Ajms 12.12.2008 | I am slowly working on a TSI for Traktor Pro, but should be done soon. I tried with T3.4 but easier to program with VCI-300 in Traktor Pro modifiers. I believe the VCI-300 gets a little ignored here or maybe just new. I hope it gets a little more attention soon as it is a fine controller. |
12.12.2008 | Hey there, I've got my VCI-300 in today after waiting since august and it was totally worth it!!! But, I don't want to use Itch, I use Traktor (not Pro). I have the latest mini translator and the latest TKS. files from ranking s here. But all the cue and loop leds are not working, the play and cue button leds are not working, the line fader leds are not working AND the pitch faders hardly have any response. When I move it from full bottom to full top it only differs 0.1. Has anyone got a solotion or a TKS. file that has all the functionallity (led's and stuff) Thanx in advance! |
| MadMan Ajms 22.11.2008 | I tried this and it has a good idea but I cannot even get the cue buttons to stay down (toggle) only via (hold). Also, the ptich control moves the pitch and the effects selection at same time.. Anyone have a real good working one they can share? |
| karl harris 20.11.2008 | Well I got installed it etc.. Definately not finished. Is there a diagram somewhere of what does what? Als when playing a track and pressing sync totally messes up. Wherever you have it when you sync is the 0 point. SO 4.9% becomes 0%. Which leaves little room to adjust other tracks. |
| MadMan Ajms 20.11.2008 | I see there are 4 pages mapped here.Nice one, but any explanation of the functions? I am trying to guess around with the shift button and found effects by using the platter, but what else is hidden? Ean can you make a fat one with Bones for the Pro version? 4 decks, fx and.. |
| Thomas Weser 18.11.2008 |
Originally Posted by claudek
|
| MadMan Ajms 17.11.2008 | yes, but select booth outs in monitor /booth outs section.. play around with it. your close.Maybe on PC you need to use ASIO for all? |
| Thomas Weser 17.11.2008 |
Originally Posted by claudek
|
| Thomas Weser 17.11.2008 | image |
| Stephane Arveson 17.11.2008 | What's the main differences with between Traktor 3.4 and Traktor Pro, is it really worth upgrading? |
| MadMan Ajms 17.11.2008 |
Originally Posted by Spacemonkey
and these new powerful midi modifiers...soon there should be some nice .tsi file with many cool functions. |
| MadMan Ajms 17.11.2008 | if you have your vci-300 hooked up, you will see outs 0/1/2/3 as outs. 0/1 are main outs, 2/3 are headphone. |
| Stephane Arveson 17.11.2008 | I had a look at that earlier today, but I cannot get it to work that well either. I'm using Traktor 3.4 with the VCI-300, also there's no scratch available, can this be midi mapped? Keep up the good work all you VCI-300 users . |
| Thomas Weser 17.11.2008 |
Originally Posted by claudek
I have only 2 options, I don't have 3 and 4 channel. why? :eek: |
| MadMan Ajms 16.11.2008 |
Originally Posted by vci-lover
|
| MadMan Ajms 16.11.2008 | I got it all working now in Traktor 3.4 with Ean's tks..Thanks It works quite well.. I was just wondering if there would be a way to add another deck and choose from it...so 3/4 decks.. Works very well for a starter..Like to see what Traktor Pro VCI 300 TKS will be like soon with mini.trans.. |
<< Back to Post and find Controller MappingsReply