VCI-100+Traktor Pro tsi - no SE overlay required
VCI-100+Traktor Pro tsi - no SE overlay required Posted on: 19.01.2009 by Hipolito Scionti Hey First off, DJ TT is the nuts! I've taken so much from this site i wanted to give something back I've created a tsi for VCI -100 with Traktor Pro that requires no overlay. I mix deep house and disco redit stuff (Greg Wilson, Lindstrom etc) or party tunes that all have different bpm, so this tsi is aimed at that kind of set up. (NB that SE overlay looks wicked and the way it works looks very logical and cool but i have kind of started using my VCI without so just wanted to get the best out of the standard layout) I used Zac Kyoti's tsi as a base (hope you don't mind dude, it's an amazing tsi man but i'm not really a scratch dj but i wanted that feel for the plates so i kind of tweaked the other functions, mainly fx and loop to more what i'm used to) It's also a mixture of some other tsi files i've tried too. I'm not amazing at mapping (i don't even massively understand modifiers) so that's why it's not too complicated. There might be some really obvious things i need to update - let me know. I've also attached a kind of guide with pictures that i cobbled together on photoshop. It's included in the zip file. Enjoy http://www.maxonemusic.com/djtt-mods/tsi-files-vci-100/ Please give me any feedback or tweak/change it and repost it. | |
| Erasmo Houck 20.02.2011 | well it is exactly what it says my take on Max One's already tight tsi file everything should be easy to figure out if you have used his original file ... hope some one uses it or at least tries it out .... any way enjoy !! |
| Betsey Bendik 22.01.2011 | Hi, was hoping that someone could help me. Ever since I've upgraded to Windows 7 64 bit, the mapping on my vestax vci 100 won't work properly no matter what overlay I use. I can't run through XP on my computer either. I have the most up to date drivers for my audio 2 dj and the latest version of Traktor Pro. What is happening is that the filter is also turning the low, the low is also turning the mid and the mid is also turning the high at the same time, despite only turning one of them. The effects buttons also don't work properly. Has anyone else had this problem and have an idea how to troubleshoot? Many thanks. |
| Sueann Masangcay 13.10.2009 | hey guys, ive just started using this mapping and its all good so far apart from a problem im having with the filter on channel 2.. the filter knob/pot on channel 2 doesnt work when i turn it, but if i click on screen to engage it and then turn the knob/pot, it works.. when its turned back to its 12 o'clock position, it goes off again. so to re-engage it i have to re-click on the screen then use the knob/pot to filter.. the filter on channel 1 works just fine and normally.. any ideas on how to fix this?? thanks. |
| Vernon Positano 10.09.2009 | The 4 deck updated version of this mapping can be found in another thread in this community |
| Doug Nancy 10.09.2009 | Sounds interesting. Any chance you could reupload it somewhere? Seems the download has been taken down. |
| Hipolito Scionti 15.08.2009 | I haven't downloaded tpro 1.2 yet. I've got my own wedding (which i'm going to be playing at for a bit haha) and i can't be dealing with sketching out my set up with a beta version of tpro. So what happens when you import this tsi into tpro 1.2? does it work at all? I was hopping the jog wheels would transfer over at least. the rest of the mapping is pretty straight forward. I would like to try and integrate the juggling mode from the se version at some point cause that looks pretty intuitive and fun but it could be a little complicated |
| Merlyn Komula 14.08.2009 | so are we expecting a tsi for tpro 1.2 ? |
| Maryrose Hattrup 06.08.2009 | Does anybody know how to map the jogwheel fx that ean golden has could someone help me please. |
| Vernon Positano 27.06.2009 | I will be adding four deck support the next version I do, but that won't be for a week or two. |
| Michaela Speech 26.06.2009 | is there a way that you could mod it to add decks c and d |
| Vernon Positano 26.06.2009 | That 'random text' is the tsi file Instead of clicking the link, just right click and choose 'save as' Also, yes.. as part of the re-edit I assigned the 'set cue' button to errmm.. set a cue point ! |
| Cecile Eyo 23.06.2009 | Hiya DJ Moonie Thanks for this, unfortunately when I go to your link 'TSI link here' I get redirected to a page with random text on it? Would be great if you can fix this or let me know where I am going wrong. Also can I check when you amended the TSI did you include a function to add cue point the original didn't seem to have that. Easy to add but thought I would check? When I played with it I also assigned the small black buttons to scroll through the effects. I also fixed a bug as advised by Zac Kyoti. Please see below for the issue I had. 'Some tsi files have a bug where if the jog gets nudged while the deck is paused, the track appears to not respond to the jog when playback is resumed. If that's the case, see if the tsi has "jog scratch + tempo bend" commands on the jogs. If so, you might try deleting them, just make sure you still have "tempo bend" applied to the outside of the jogs. I've seen that command do weird things before.' Cheers CB |
| Vernon Positano 23.06.2009 | Just to let you guys know that as promised, I have modded this TSI file, stripped out some bugs, and cleaned up the redundant note mappings, and posted the result here:- http://www.djranking s.com/community /showthread.php?t=5733 |
| Michaela Speech 22.06.2009 | dude i just started useing this Tsi file....ITs awesome By far the best one ive used so far !! |
| Cecile Eyo 23.06.2009 | I look forward to trying out your files.Thanks for putting the time in. |
| Vernon Positano 17.06.2009 | Hi, Just like to add that for me, this mapping is nearly perfect. Everything is inituitive and where I'd like it to be. There are a few bugs and some very minor tweaks which I'm going to make then repost the file back on DJTT. Once that's done, I may set to work on a 4D version of the same. |
| Mariela Cutway 15.06.2009 | Its very nice! The only things that i miss it the 'Juggle Mode' from the original! Make this mapping with the Juggle mode feature and you have made the best tsi imo |
| Mariela Cutway 12.06.2009 | Make it for traktor 3 :/ |
| Reece Murray 20.05.2009 | Looking for the mappings that have 1.2 in the title is a good start, but most custom mappings are going to have a few changes from the factory plates. But use 'em enough and you'll figure out where everything is! |
| Reena Buckel 21.05.2009 | witch tsi file can a use with the overlay -se without the firmware install for the traktor pro version |
| Quiana Mahnken 18.05.2009 | does this file only work on mac or windows as well |
| Cecile Eyo 17.05.2009 | Thanks DJMaxone good advice I will try that. I held off getting Pro and I must admit I like the interface, but so far to setting it up is taking far to long, I really wouldn't recommend TPro to anyone. Ableton or Serarto next stop! By the way your set up is exactly the same as mine. |
| Andrea Kew 16.05.2009 | Big ups! I've been working this out for the last 8 hours in order to get going for a gig toevening
(small bar) and this is perfect! I shouldn't have any problems! Can't wait to take my new VCI out for a spin! Thanks again! |
| Hipolito Scionti 16.05.2009 | Have you tried various tsi files? Just try a few different ones to make sure it's nothing in the mapping. Also get two tracks you know are a similar tempo and make sure they're electronic tunes - like house or something. Do the test with the different tsi files with these same tunes. I have found that sometime the sync works perfectly with Pro and sometimes it doesn't. It's odd. But i'd say 90% of the time it's fine. Anyway if after these tests it's still sketchy i'd say it's probably something faulty with the software Good luck |
| Cecile Eyo 15.05.2009 | Hiya I would really appreciate any advice on how the sync function works on Traktor Pro. With T3 it was easy, press sync and it locked.. The sync on TP changes the tempo but doesn't lock. Also sometimes the visual looks like it is cut in half, what is that all about? Do I have a corrupted version? To keep sync I have to keep press sync, that can't be right? Also no matter what I do I can't get the sync lights to work properly with my vci 100, sometimes they do, sometimes they don't. I have had someone who knows stuff look at it and they can't work it out. Of course NI are useless in getting back to me. This is all reallly really annoying. Any suggestions gratefully received! |
| Tyler Liesen 07.05.2009 | Hi first post here you just saved my life this midi mapping stuff is hard massive thanks man |
| Hipolito Scionti 01.05.2009 | I've no idea why Vestax or NI couldn't get a map that at least gave the plates that vinyl feel. Madness innit You know, I'm no mapping expert. My TSI is just a combination of other tsi files i've taken of here DJTT. I've just taken elements of bits i like and copied what was in the mapping section. Regarding it working 100%, it works pretty much 100% the way I want it. I know people have chatted about some glitches but i haven't noticed them or on mine I don't have any probs. So as far as I'm concerned it is good to go. And I'm afraid i haven't made one for 3/4 decks and to be honest I probably am not going to. If someone wants to take this TSI and make a 3/4 deck version though that'd be cool. Repost it on this site. Anyway, some glad people are digging it. Peace out :-) . |
| Cecile Eyo 29.04.2009 | Hi DJmaxone Forgot to ask did you ever do a .tsi file for 3 or 4 decks? I haven't had chance to load it yet so wanted to check with you if it is possible to use another deck to drop in samples and loops etc. Cheers |
| Cameron Galante 29.04.2009 | i was wondering about the same thing... Thanx for this tsi by the way! does it work for 100% right now? |
| Cecile Eyo 28.04.2009 | Many many thanks I appreciate your help and sharing your work. It must have taken a long time to develop. It amazes me why NI or Vestax with all their resources cannot put out a file that works? Does anyone have any idea. We really should make our comments know to these companies who are frankly lazy. Cheers Cheek Bone |
| Hipolito Scionti 29.04.2009 | No worries dude Here you go - you'll just need to unzip it http://www.onetimemusic.co.uk/tsi/VCI-100_MX1.zip |
| Cecile Eyo 29.04.2009 | Hi DJmaxone Sounds like you have done great work on the file. As I have just found this community and am in desperate need to load a .tsi file that works I wanted to check where I could find your latest version. Thanking you in advance. Cheek Bone. |
| Hipolito Scionti 09.04.2009 | Hey, Glad people are feeling this file. I actually forgot to check back to see if anyone had responded to this thread. Anyway, sorry about any little glitches. It seems to work ok for me. Re deck A and Bs cue/play buttons working differently i've had a look and they seem ok on mine. Both decks act differently depending on if the deck is playing or stopped though. I can upload again if you haven't sorted it out. Anyway, good to see it's getting used. Big up Mx1 |
| Concha Smedile 27.03.2009 | nevermind |
| Dj Fonzie Ciaco 23.03.2009 | I suppose its only for Traktor Pro 1.1, right? |
| Fairy Busacca 23.03.2009 | I believe I would be in a dark dark place plotting the destruction of my newly purchased VCI-100 if not for this tsi. Thanks man I finally got it working. My FX on the left doesn't work yet but it will all come in time and tweakin I guess. Any know when Ean is supposed to be in Bali? |
| Renato Couto 22.03.2009 |
Originally Posted by djmaxone
you saved me lots of frustation |
| Arie Ludke 21.03.2009 | amazing tsi mate, exactly what i needed it would be also nice if you could do the same for 4decks |
| Mariette Denos 17.03.2009 | I have been struggking to get pro to function properly since downloading the upgrae from CE. This file is closer than anything I trued to correcting my issues. I am a complete idiot so I know nothing about this mapping stuff. The only thing now that needs improved is a finer pitch control . LE controls the pitch down to .01. Pro gets nowhere near that. Help anyone please. Please speak like you are speaking to a no nothing old man Thanks |
| Josef Haroldsen 16.03.2009 | ok, figured it out. if anyone has a similar problem, look in the "global view options" tab in the preferences. |
<< Back to Post and find Controller MappingsReply