Modified Instant Gratification - Loops/Cues + Transport
Home :: Post and find Controller Mappings :: Modified Instant Gratification - Loops/Cues + TransportReply
Modified Instant Gratification - Loops/Cues + Transport Posted on: 06.03.2011 by Soledad Kipke Just modified the Instant Gratification mapping. I liked it, but I thought I wasn't really using all of it, so I added some features. This is built for two-deck performances. Ordinarily the 4 banks are mapped to one of the four decks each, but I switched banks 3 and 4 to be alternate controls for decks A and B respectively.Here are the controls (buttons are going to be referred to as 1-4 for the top row, then 5-8, 9-12, and 13-16) 1-4 switches banks like usual (that's part of the hardware, not the mapping really) 5 is a shift button 8 drops an 8-count loop, pressing it again deactivates it. 6 and 7 decrease and increase loop size When a loop is running, AND you hold shift, buttons 6 and 7 shift the loop left and right by 1/16 count in the track. This is a pretty cool effect, especially with vocals. buttons 9-12 trigger hotcues 1-4 (with the Select/Set+Store command), and 13-16 are hotcues 5-8. If you hold shift and press a cue button it will delete the corresponding cue. So that's it, just some simple features to make things a little easier. If I add more stuff later I'll post an updated version! If you guys have any suggestions for stuff to add/change, I'll try to make them EDIT: Totally forgot about something. If you hold shift (and there is no loop running), button 6 becomes Sync, button 7 becomes Cue, and button 8 is Play/Pause. My bad! Also, because I'm not as slick as Ean and the gang, I couldn't put it all into 1 .tsi, so there are 4, one for each bank on the midi fighter. I put them all into a .zip, and it should work if you just import all of them, set to "Midifighter" on the in-port and out-port. | |
Soledad Kipke 06.03.2011 | Just modified the Instant Gratification mapping. I liked it, but I thought I wasn't really using all of it, so I added some features. This is built for two-deck performances. Ordinarily the 4 banks are mapped to one of the four decks each, but I switched banks 3 and 4 to be alternate controls for decks A and B respectively. Here are the controls (buttons are going to be referred to as 1-4 for the top row, then 5-8, 9-12, and 13-16) 1-4 switches banks like usual (that's part of the hardware, not the mapping really) 5 is a shift button 8 drops an 8-count loop, pressing it again deactivates it. 6 and 7 decrease and increase loop size When a loop is running, AND you hold shift, buttons 6 and 7 shift the loop left and right by 1/16 count in the track. This is a pretty cool effect, especially with vocals. buttons 9-12 trigger hotcues 1-4 (with the Select/Set+Store command), and 13-16 are hotcues 5-8. If you hold shift and press a cue button it will delete the corresponding cue. So that's it, just some simple features to make things a little easier. If I add more stuff later I'll post an updated version! If you guys have any suggestions for stuff to add/change, I'll try to make them EDIT: Totally forgot about something. If you hold shift (and there is no loop running), button 6 becomes Sync, button 7 becomes Cue, and button 8 is Play/Pause. My bad! Also, because I'm not as slick as Ean and the gang, I couldn't put it all into 1 .tsi, so there are 4, one for each bank on the midi fighter. I put them all into a .zip, and it should work if you just import all of them, set to "Midifighter" on the in-port and out-port. |
Rey Holubar 16.09.2011 | Sounds like you went the other way to the Deckalized mapping. Added the some Deckalized goodies to the IGM. Good work! scamo |
Scott Tumey 16.09.2011 | by far the best midi fighter paping out there |
Leeanna Ayla 03.08.2011 | Find the effects in the controller manager and adjust some of the paramaters. |
Neta Schlaefli 03.08.2011 | sick man nice.. Do you know anything about changing the effect parameters on the instant grat? I'm looking to change some of the effects and I'm a bit confused. |
Tatum Ansaldo 27.05.2011 | Very nice work. Out of interest, are the IG mappings in your file the older or newer version? It shouldn't make a difference since there's a different one for each bank so they're interchangeable, just wondering. |
Scott Tumey 27.05.2011 | thanks, this is exactly what i needed. |
Ana Miglino 15.05.2011 | Exactly what I was looking for. Great Job!! |
Leeanna Ayla 06.03.2011 | Great work. Several people asked for something like this and I'm sure they'll be happy. |
<< Back to Post and find Controller MappingsReply