Akai LPD8 and Traktor Pro(All-in-one controls) ** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Merideth Schnaufer
11.01.2014 | Can anyone upload the exported Traktor Presets?
Thx |
Jada Greenhagen
24.03.2013 |
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 – Play/Pause [Deck A]
Pad 2 – Sync [Deck A]
Pad 3 – Keylock [Deck A]
Pad 4 – Monitor [Deck A]
Pad 5 – Play/Pause [Deck B]
Pad 6 – Sync [Deck B]
Pad 7 – Keylock [Deck B]
Pad 8 – Monitor [Deck B]
Pads (Pad):
Pad 1 – Hotcue 1 [Deck A]
Pad 2 – Hotcue 2 [Deck A]
Pad 3 – Hotcue 3 [Deck A]
Pad 4 – Hotcue 4 [Deck A]
Pad 5 – Hotcue 1 [Deck B]
Pad 6 – Hotcue 2 [Deck B]
Pad 7 – Hotcue 3 [Deck B]
Pad 8 – Hotcue 4 [Deck B]
Knobs
K1– Select Effect 1 [Unit 1 Chained FX]
K2– Select Effect 2 [Unit 1 Chained FX]
K3– Select Effect 3 [Unit 1 Chained FX]
K4– Select Effect [Unit 2 Advanced FX]
K5 – Pitch [Focus]
K6 – Input Fader [Deck A]
K7 – Input Fader [Deck B]
K8 – Crossfader
Program 2 (Effect Controls)
Pads (CC):
Pad 1 – Effect Unit 1 On [Deck B]
Pad 2 – Effect Unit 2 On [Deck B]
Pad 3 – Empty
Pad 4 – Empty
Pad 5 – Effect Unit 1 On [Deck A]
Pad 6 – Effect Unit 2 On [Deck A]
Pad 7 – Empty
Pad 8 – Empty
Pads (Pad):
Pad 1 – Effect On [Unit 2]
Pad 2 – Effect Rst [Unit 2]
Pad 3 – Effect Button 1 [Unit 2]
Pad 4 – Effect Button 2 [Unit 2]
Pad 5 – Empty
Pad 6 – Effect 1 On [Unit 1]
Pad 7 – Effect 2 On [Unit 1]
Pad 8 – Effect 3 On [Unit 1]
Knobs
K1– Dry/Wet [Unit 2]
K2–Effect Param 1 [Unit 2]
K3– Effect Param 2 [Unit 2]
K4– Effect Param 3 [Unit 2]
K5 – Dry/Wet [Unit 1]
K6 – Effect 1 Control [Unit 1]
K7 – Effect 1 Control [Unit 2]
K8 – Effect 1 Control [Unit 3]
Program 3 (Mixer Levels)
Pads (CC):
Pad 1 – Gain Kill [Deck B]
Pad 2 – Hi Kill [Deck B]
Pad 3 – Mid Kill [Deck B]
Pad 4 – Low Kill [Deck B]
Pad 5 – Gain Kill [Deck A]
Pad 6 – Hi Kill [Deck A]
Pad 7 – Mid Kill [Deck A]
Pad 8 – Low Kill [Deck A]
Pads (Pad):
Pad 1 – Empty
Pad 2 – Empty
Pad 3 – Empty
Pad 4 – Empty
Pad 5 – Empty
Pad 6 – Empty
Pad 7 – Empty
Pad 8 – Empty
Knobs
K1 – Gain [Deck A]
K2 – Hi [Deck A]
K3 – Mid [Deck A]
K4 – Low [Deck A]
K5 – Gain [Deck B]
K6 – Hi [Deck B]
K7 – Mid [Deck B]
K8 – Low [Deck B]
Program 4 (Loop Controls)
Pads (CC):
Pad 1 – Play/Pause
Pad 2 – Loop In Set Cue
Pad 3 – Loop Out
Pad 4 – Active
Pad 5 – Play/Pause
Pad 6 – Loop In/ Set Cue
Pad 7 – Loop Out
Pad 8 – Active
Pads (Pad):
Pad 1 – Hotcue 5 [Deck A]
Pad 2 – Hotcue 6 [Deck A]
Pad 3 – Hotcue 7 [Deck A]
Pad 4 – Hotcue 8 [Deck A]
Pad 5 – Hotcue 5 [Deck B]
Pad 6 – Hotcue 6 [Deck B]
Pad 7 – Hotcue 7 [Deck B]
Pad 8 – Hotcue 8 [Deck B]
Knobs
K1 – Loop Size [Deck A]
K2 – Empty
K3 – Empty
K4 – Empty
K5 – Loop Size [Deck B]
K6 – Empty
K7 – Empty
K8 – Empty
Hi!
I downloaded the presets OK, yet, the tsi file is downloading as a document/xml file vs exe file. I am using a Mac. ANy thoughts? Thanks!
UPDATE (4/1/13): Got it to work by renaming file. Thanks and great job with this! |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Terresa Smoody
28.02.2011 |
Originally Posted by pARtybOy
hello there!just got my LDP8 today,and still building a costumized preset...
is it possible to use the button "prog chng" as we do with "CC" button?traktor Midi Learn doesn't detect any messages...I could have 3 different functions to the pads in the same "Program"...
thank you.
The Prog Chng doesn't receive or send midi so we cannot do anything with it. |
Jada Greenhagen
24.03.2013 |
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 – Play/Pause [Deck A]
Pad 2 – Sync [Deck A]
Pad 3 – Keylock [Deck A]
Pad 4 – Monitor [Deck A]
Pad 5 – Play/Pause [Deck B]
Pad 6 – Sync [Deck B]
Pad 7 – Keylock [Deck B]
Pad 8 – Monitor [Deck B]
Pads (Pad):
Pad 1 – Hotcue 1 [Deck A]
Pad 2 – Hotcue 2 [Deck A]
Pad 3 – Hotcue 3 [Deck A]
Pad 4 – Hotcue 4 [Deck A]
Pad 5 – Hotcue 1 [Deck B]
Pad 6 – Hotcue 2 [Deck B]
Pad 7 – Hotcue 3 [Deck B]
Pad 8 – Hotcue 4 [Deck B]
Knobs
K1– Select Effect 1 [Unit 1 Chained FX]
K2– Select Effect 2 [Unit 1 Chained FX]
K3– Select Effect 3 [Unit 1 Chained FX]
K4– Select Effect [Unit 2 Advanced FX]
K5 – Pitch [Focus]
K6 – Input Fader [Deck A]
K7 – Input Fader [Deck B]
K8 – Crossfader
Program 2 (Effect Controls)
Pads (CC):
Pad 1 – Effect Unit 1 On [Deck B]
Pad 2 – Effect Unit 2 On [Deck B]
Pad 3 – Empty
Pad 4 – Empty
Pad 5 – Effect Unit 1 On [Deck A]
Pad 6 – Effect Unit 2 On [Deck A]
Pad 7 – Empty
Pad 8 – Empty
Pads (Pad):
Pad 1 – Effect On [Unit 2]
Pad 2 – Effect Rst [Unit 2]
Pad 3 – Effect Button 1 [Unit 2]
Pad 4 – Effect Button 2 [Unit 2]
Pad 5 – Empty
Pad 6 – Effect 1 On [Unit 1]
Pad 7 – Effect 2 On [Unit 1]
Pad 8 – Effect 3 On [Unit 1]
Knobs
K1– Dry/Wet [Unit 2]
K2–Effect Param 1 [Unit 2]
K3– Effect Param 2 [Unit 2]
K4– Effect Param 3 [Unit 2]
K5 – Dry/Wet [Unit 1]
K6 – Effect 1 Control [Unit 1]
K7 – Effect 1 Control [Unit 2]
K8 – Effect 1 Control [Unit 3]
Program 3 (Mixer Levels)
Pads (CC):
Pad 1 – Gain Kill [Deck B]
Pad 2 – Hi Kill [Deck B]
Pad 3 – Mid Kill [Deck B]
Pad 4 – Low Kill [Deck B]
Pad 5 – Gain Kill [Deck A]
Pad 6 – Hi Kill [Deck A]
Pad 7 – Mid Kill [Deck A]
Pad 8 – Low Kill [Deck A]
Pads (Pad):
Pad 1 – Empty
Pad 2 – Empty
Pad 3 – Empty
Pad 4 – Empty
Pad 5 – Empty
Pad 6 – Empty
Pad 7 – Empty
Pad 8 – Empty
Knobs
K1 – Gain [Deck A]
K2 – Hi [Deck A]
K3 – Mid [Deck A]
K4 – Low [Deck A]
K5 – Gain [Deck B]
K6 – Hi [Deck B]
K7 – Mid [Deck B]
K8 – Low [Deck B]
Program 4 (Loop Controls)
Pads (CC):
Pad 1 – Play/Pause
Pad 2 – Loop In Set Cue
Pad 3 – Loop Out
Pad 4 – Active
Pad 5 – Play/Pause
Pad 6 – Loop In/ Set Cue
Pad 7 – Loop Out
Pad 8 – Active
Pads (Pad):
Pad 1 – Hotcue 5 [Deck A]
Pad 2 – Hotcue 6 [Deck A]
Pad 3 – Hotcue 7 [Deck A]
Pad 4 – Hotcue 8 [Deck A]
Pad 5 – Hotcue 5 [Deck B]
Pad 6 – Hotcue 6 [Deck B]
Pad 7 – Hotcue 7 [Deck B]
Pad 8 – Hotcue 8 [Deck B]
Knobs
K1 – Loop Size [Deck A]
K2 – Empty
K3 – Empty
K4 – Empty
K5 – Loop Size [Deck B]
K6 – Empty
K7 – Empty
K8 – Empty
Hi!
I downloaded the presets OK, yet, the tsi file is downloading as a document/xml file vs exe file. I am using a Mac. ANy thoughts? Thanks!
UPDATE (4/1/13): Got it to work by renaming file. Thanks and great job with this! |
Terresa Smoody
20.11.2012 | Does anyone with Traktor 2 use this? If not I'll ask if anyone could anyone test this for Traktor 2 for me? I have not made the upgrade yet. |
Lorna Oyervides
24.03.2012 | I really enjoy your settings, Is it possible to affect audio samples (mp3 or WAV) to the LPD8 and connect it to traktor, If yes, how?
Many thanks in advance**
Originally Posted by svensat
** 03/04/2010 - V1.2 mapping is up fixed Eq kills and some other bugs.
I tried to package as much into the mapping as I could. Keep in mind that I use a keyboard with hotkeys to load songs and for simple deck control (Play/pause, monitor select, and some crossfader control). Also note that when switching between programs on the LPD8 the knobs will snap to where the knob is currently(from the previous program youwer in) if you move it at all. If you do not touch it when you are in a new program it will not change it's value.
You will need to load the presets contained in the attached Zip file through the Akai LPD8 software before loading the attached tsi in traktor. Note: if Traktor is open and reading your LPD8 the LPD8's software will not be able to recognize that the controller is plugged in. Simply exit Traktor and the software will be able to read the LPD8 is running.
Program 1 (Cues, Loading, Mixing, Juggling)
Pads (CC):
Pad 1 |
Lavelle Lulewicz
08.01.2012 | so what you need to do for all of you is change the cc# for all the knobs in the lpd8 editor, and comit evry time you cange but the tsi wont work so you will have the chage it yourself in traktor for the right knob. |
Terresa Smoody
06.09.2011 | If anyone has any mixes: recordings or video's I would love to see how all of you are using it!!! (As I have added a VCI to my setup and don't use my LPD8 with this mapping anymore. |
Shavonne Paten
06.07.2011 | Thanx! |
Cesar Antonietti
01.07.2011 | I'm extremely impressed with this, thankyou so much! Works flawlessly with Traktor 2. |
Gertrud Khani
29.04.2011 | You believe you could make one works well with the Hercules RMX? I would greatly appreciate it!
If you can forward it to my email -> [email protected]
Thanks again! |
Eneida Reichenbaugh
07.04.2011 | Thanks, though I wasnt able to use any of your files uploaded for some reason (probably firmware incompatability issues), this whole post helped me understand how to use the LPD 8. This is my first controller where I have to manually map everything myself. though its a bit tedious and time consuming it is well worth it. |
Albina Califano
28.02.2011 | right.I hope Traktor 2 can read those messages,I bought this gear spec. for the sample deck...
Thanks for the fast reply svensat!
regards. |
Terresa Smoody
28.02.2011 |
Originally Posted by pARtybOy
hello there!just got my LDP8 today,and still building a costumized preset...
is it possible to use the button "prog chng" as we do with "CC" button?traktor Midi Learn doesn't detect any messages...I could have 3 different functions to the pads in the same "Program"...
thank you.
The Prog Chng doesn't receive or send midi so we cannot do anything with it. |
Albina Califano
28.02.2011 | hello there!just got my LDP8 today,and still building a costumized preset...
is it possible to use the button "prog chng" as we do with "CC" button?traktor Midi Learn doesn't detect any messages...I could have 3 different functions to the pads in the same "Program"...
thank you. |
Velma Elsherif
19.02.2011 | I Tried using your mappings. But it won't work just right. I have traktorpro 1.2.4 . Does it not work for this version? I followed all the instructions and i've been trying to get this to work for the past 4-5 hours. This is exactly what i did..
1) Downloaded the presets from you (on this thread on page 1)
2) Loaded it onto LPD8 Editor (each preset 1,2,3,4)
3) I saved it the preset
4) Confirmed it ( Upload sucessful! green button)
5) OPENING UP traktor pro (yes, it was closed before)
6) Imported LPD8-for-DJTT-v-1-2.tsi
Now it's game time! All i want is preset program #2!
So i go on that channel. I press PROGRAM and press PAD#2
Turning knob #5,6,7,8 works!
Pressing pads 5,6,7,8 ! works!
pressing 1,2,3,4, NO!! =[
Turning knob 1,2,3,4 doesn't work! NO! =[
So basicailly the left side of my Control Effects can be activated.
But my right side of the deck... no luck!
So i'm guessing it doesnt work with TraktorPro1.2.4? Please save me.
P.S.
According to your screen shots, those preset settings look the same...
Is it suppose to look the same? because my preloaded settings are way off compared to the screen shots.
I appreciate you putting time for us! You da man! |
Terresa Smoody
17.02.2011 | Took a little longer than expected but here are all the preset settings. |
Jamaal Elchert
14.02.2011 | Screenshots would be awesome, thank you. And I ran the LPD8 Editor as an admin to no avail, still getting identical mapping for all 4 presets. Thanks for the speedy response and I look forward to checking out those screenshots when I get home from work. Thanks again! |
Terresa Smoody
14.02.2011 | I could take screenshots of the setting for the presets and you could set them up manually so you don't have to remap everything yourself. Let me know if you want me to do that. I could get those to you later toevening
.
The only other thing I can believe of if running the editor with Admin Privileges. |
Jamaal Elchert
14.02.2011 | I'm running Windows 7. As I said I know Traktor needs to be closed when using or even just opening the LPD8 editor and I have been switching banks before loading each corresponding preset and committing & uploading it. The only preset that seems to load as it should is preset one, after that all the presets appear to have the same note # and cc # values as the 1st preset. So after loading preset 1 and opening traktor to see "what works", the pads adjust deck volume, the x fader, and some EQ parameters while the knobs control play/pause, sync and key lock. Again I have had no trouble loading my own presets or presets others have made for ableton and other DAW software as well as DJ software but these presets seem to not be functioning properly for me; even after re-downloading multiple times and trying different unpacking software. I'm officially frustrated/stumped and have begun just making my own mapping. Thanks for the effort though. |
Terresa Smoody
12.02.2011 | Make sure when you are loading the presets in the LPD8 Editor that Traktor is closed. I usually commit upload every time I load a Preset. Also be sure you are switching banks before loading the next preset. Other than that without more info as what works/doesn't can't offer more advice.
What Operating System are you using? The presets have successfully been unzipped? |
Jamaal Elchert
11.02.2011 | So I have attempted to map the presets following all the instructions given and am still getting the same cc values for all knobs and pads across presets 1-4. In other words when I change the preset field on the editor then go to upload the corresponding preset none of the values change for presets 2-4. I know to close traktor when using the editor and have been successful in uploading my own mappings but have had no luck uploading these presets. I use winrar but also attempted using 7zip and not only did it not work as intended but the files won't even extract, whether I try to use the extract button or drag and drop. Loading the .tsi file works fine in Traktor but I am stumped on these presets. Any help on how to load them or a file/response containing the CC values for all pads and knobs, so I could just map it myself, would be greatly appreciated. |
Leann Zugay
06.01.2011 | Hey just want to say thanks, this has been really useful for me! |
Lawerence Bernt
02.12.2010 |
Originally Posted by svensat
Make sure you change the Preset # in the top right before loading the preset for the respective bank. If that's not the problem. I'm not sure what to say.
I have been. Should there be a "done" message after committing? |
Terresa Smoody
01.12.2010 |
Originally Posted by rami
Hi, i'm having trouble loading the presets, but none of the previous answers seem to apply.
Using a Mac...after hitting load, I select the preset, then "commit"...nothing seems to save except for the latest one I have loaded. am I doing anything wrong?
do i have to convert the files to something else?
Make sure you change the Preset # in the top right before loading the preset for the respective bank. If that's not the problem. I'm not sure what to say. |
Lawerence Bernt
01.12.2010 | Hi, i'm having trouble loading the presets, but none of the previous answers seem to apply.
Using a Mac...after hitting load, I select the preset, then "commit"...nothing seems to save except for the latest one I have loaded. am I doing anything wrong?
do i have to convert the files to something else? |
Betty Divinagracia
23.09.2010 | Yeap... Tnx, it works now! You should click twice on this Preset file (using the 7z) to see 4 Presets for each bank. |
Terresa Smoody
22.09.2010 |
Originally Posted by XFX
Hmmm... Maybe something wrong with my PC or Winrar
Only one perset so far, so I can`t upload it in Akai Soft.
It may be a problem with Winrar. I am at work on a Mac and everything was there. You could maybe try using 7zip and open source archiving program which can extract zip files:
http://www.7-zip.org/ |
Betty Divinagracia
22.09.2010 |
Originally Posted by svensat
In the .zip file there is one folder called Presets and within that folder there should be four files Preset 1, Preset 2, Preset 3, and Preset 4respectively for the each program bank.
Hmmm... Maybe something wrong with my PC or Winrar, but here what I have in this Archive
Only one perset so far, so I can`t upload it in Akai Soft. |
Terresa Smoody
21.09.2010 |
Originally Posted by Kitsune
Hey Guys.
As far as I understand you need to have Traktor Pro, otherwise you cannot import the .tsi file, don |
