Cue monitoring function, volume and cross fader problem
Cue monitoring function, volume and cross fader problem Posted on: 16.08.2011 by Phil Ponte Hello everyone!I am having a bit of a problem with cue monitoring function, volume and cross fader on my Denon DN-X1600 mixer. These functions don't work. I am using my mixer on MIDI mode with my Traktor software. My Traktor settings are: Output routing: Mixing mode: External Output Deck A,B,C,D: Mixer output routings Output Preview: not connected Output FX return: not connected Input routing: Input Deck A,B,C,D: Mixer input routings Input FX send (ext): not connected I have mapped my volume fader and my cross fader(as X-fader) in Traktor. Still it does not recognize them. Now with Cue monitoring function, mapping isn't even possible, because the mixer cue button can't be learned in controller manager/device mapping section. EQ knobs, however all work in MIDI, like they were mapped. I have my USB assign on my mixer set to Master instead of CH, and maybe that has something to do with it, but I am not sure. If anyone is using a similar setup and is familiar with my mixer, please help, because this problem is kiling me. Thank you for your help all! | |
| Leeanna Ayla 16.08.2011 | You need to be on USB B and set USB assign to CH. Set your matrix switches to the appropriate settings and match Traktor's settings to that I have channels A/B in the center with C/D on the outsides. This is what mine looks like in Traktor. I have my sample decks both running through channel C and output preview on Channel D. Internal recording in Traktor recording is set up on Channel D as well following these instructions from Frank
Originally Posted by Frank112916
|
| Phil Ponte 16.08.2011 | Hello everyone! I am having a bit of a problem with cue monitoring function, volume and cross fader on my Denon DN-X1600 mixer. These functions don't work. I am using my mixer on MIDI mode with my Traktor software. My Traktor settings are: Output routing: Mixing mode: External Output Deck A,B,C,D: Mixer output routings Output Preview: not connected Output FX return: not connected Input routing: Input Deck A,B,C,D: Mixer input routings Input FX send (ext): not connected I have mapped my volume fader and my cross fader(as X-fader) in Traktor. Still it does not recognize them. Now with Cue monitoring function, mapping isn't even possible, because the mixer cue button can't be learned in controller manager/device mapping section. EQ knobs, however all work in MIDI, like they were mapped. I have my USB assign on my mixer set to Master instead of CH, and maybe that has something to do with it, but I am not sure. If anyone is using a similar setup and is familiar with my mixer, please help, because this problem is kiling me. Thank you for your help all! |
| Phil Ponte 20.08.2011 | Ok, all the faders and cue prelisten functions now work. I did like you told me, so thank you very much. I am already enjoying myself! |
| Phil Ponte 16.08.2011 | Yes, for the output routings: When I was doing this for the first time, I did set it like I have it assigned on my mixer but it didn't work. So I tried different options and the only thing that does worj is if I set deck A and B on USB 1/2. This baffles me as well. And like I said no sound is comming out of the speakers and headphones if I have my USB assign on CH..... It is all just very strange. |
| Leeanna Ayla 16.08.2011 | The faders don't show because you're in external mode. Also your output routing for A, B, and C are all the same channel. They should match what you have the switch on top of each channel on the mixer set to for that channel. You don't need to midi map any of that. In fact I have the cross fader set to thru on ever channel and have it mapped to the delay FX. |
| Phil Ponte 16.08.2011 | Oh, here is my set if it will help: -Denon DN-X1600 mixer -Traktor 2 DJ software -Traktor X1 controller -Windows 7 operating system I am currently using passive speakers. |
| Phil Ponte 16.08.2011 | I am running on Windows 7 so here is how my Traktor settings look like: Here you can also see that my digital cross fader and volume faders are not present: I did, however, changed USB Assign to CH, but it doesn't work. I forgot to mention, that everything works fine, but the faders and the cue monitoring function on Master USB Assign. When I switch to CH no sound is coming out of my speakers ,nor my headphones. |
| Leeanna Ayla 16.08.2011 | You need to be on USB B and set USB assign to CH. Set your matrix switches to the appropriate settings and match Traktor's settings to that I have channels A/B in the center with C/D on the outsides. This is what mine looks like in Traktor. I have my sample decks both running through channel C and output preview on Channel D. Internal recording in Traktor recording is set up on Channel D as well following these instructions from Frank
Originally Posted by Frank112916
|
<< Back to Reviews of DJ equipment Reply