Traktor 2.6.1 update now live

Home :: General Discussion :: Traktor 2.6.1 update now liveReply
Traktor 2.6.1 update now live
Posted on: 20.02.2013 by Ned Somerset
Downloading right now. Changelog mentions metadata sync with drop box? Built in key analysis, synchronization with TRAKTOR DJ, which is probably the iOS app. Check it

http://www.djranking s.com/2013/02/2...ktor-dj-hints/
Ara Tima
20.02.2013
Originally Posted by padi_04
You will definitively want to have at least 4gb of RAM to run Lion.
I'm running Lion with 2gb of RAM, but that's only possible due to an SSD, it was balls before hand.

That said I wouldn't recommend it.
Madison Luvisi
20.02.2013		No Cpu load, working as good as it was before 2.5 i even can lower my latency from 512 to 256
Sonja Roybal
20.02.2013		Anybody notice a difference in cpu load? I'm running an i3 laptop with no problems, but don't want to mess with a good thing.
Marshall Aby
20.02.2013
Originally Posted by fitzyp
I wonder when they will officially announce it
They haven't officially announced 2.6.1 either. I reckon tomorrow for both.
Madison Luvisi
20.02.2013		[QUOTE=djmichaelk;588141]just be Patient it will load takes around 7min with a bigger collection because of the new key detection i have discovered

but misses some of my collection
Ned Somerset
20.02.2013		Well there it is. Traktor Track prep app. I wonder when they will officially announce it
Nedra Fresneda
20.02.2013		Taken off page 207 of the manual

9.8 TRAKTOR PRO with TRAKTOR DJ
This section will provide a detailed explanation for using Native Instruments' iPad application TRAKTOR DJ alongside TRAKTOR PRO. The two operate together via the process of Metadata Sync, the required setup procedure along with further considerations regarding working with the iOS system are covered herein.
One of the most useful features of TRAKTOR DJ is being able to prepare tracks for later performance in TRAKTOR PRO. You can put new music into TRAKTOR DJ (even purchase new music from the iTunes Store directly on your iOS device) and then perform BPM and Key analysis, followed by additional tasks such as adding HotCues to the tracks. All of this metadata will then be transferred to TRAKTOR PRO so that the track will be ready to go the next time you wish to play it."
Nedra Fresneda
20.02.2013		You will definitively want to have at least 4gb of RAM to run Lion.
Leontine Lyder
20.02.2013
Originally Posted by DJKeyWee
The slow browser search/refresh seems to be "solved" now. About time
I'v still got a slow browser search refresh. Still got the random refresh when playing in the preview player. This is taking valuable seconds when performing
Trula Willadsen
20.02.2013		This sucks. My MacBook is too old to run 10.7 (41 months old White). It can run Lion but I'm afraid my MacBook will be to slow to safely run Traktor. Any way to bypass this?
Nedra Fresneda
20.02.2013
Nedra Fresneda
20.02.2013		It's lion on steroids, kinda what 10.6 was to 10.5.

Originally Posted by djmichaelk
Does anyone have there collection scanned with MIK and successfully using this version ? because i believe that NML collection file becomes corrupt when scanned with this version due to the fact traktor has its own Detection system..
I had mine totally analysed with MIK 5 with the setting to write the key on the proper tag field on and Traktor picked it up right away. Also, you can disable key detection in Traktor if you prefer to use MIK or any other software to handle the job.
Nereida Jasnoch
20.02.2013		Meh, there isn't a single new feature in OS X 10.8.2 that I like...

Or are there other cool things that are in the software but didn't make it into the apple commercial ?

(currently running 10.6.8)
Madison Luvisi
20.02.2013
Originally Posted by lethal_pizzle
Use the old version and figure it out after the gig, upgrading immediately before a gig is insane
Already doing going to do that thanks for the tip
Marshall Aby
20.02.2013
Originally Posted by djmichaelk
I have a gig in two hours and would like to use the new version thank you .
Use the old version and figure it out after the gig, upgrading immediately before a gig is insane
Madison Luvisi
20.02.2013		Does anyone have there collection scanned with MIK and successfully using this version ? because i believe that NML collection file becomes corrupt when scanned with this version due to the fact traktor has its own Detection system..
Jarod Perrodin
20.02.2013		I have it running on 10.6.8, it seems to work fine it didnt require any hacking or tricks. The better news for me is its working fine with my app (Masch R) as well. Happy days. Anyone know why 10.6.8 isnt supported?
Charline Dye
20.02.2013		I already use the key column and have my keys listed in musical notation (like C#m). If I use this update, what will happen? Will all my keys be renamed with Traktor's key notation?
Madison Luvisi
20.02.2013
Originally Posted by djmichaelk
Is anyone having problems loading there Collection with this release?. Ive tride numerous times by deleting the 2.6.1 folder and retrying it just hangs at loading collection. But works when i set to no collection @ launch ?

Will someone Answer my question please ? I have a gig in two hours and would like to use the new version thank you .
Thomas Dresel
20.02.2013
Originally Posted by photojojo
Sometimes it doesn't show up in Service Center right away. I had to DL it from the NI site.

https://www.native-instruments.com/i...newsletter&L=1

You will have to log in.

This sucks for me though, guess I finally have an excuse to upgrade.

same problem for me cos i run snow leopard! been waiting for the key detection whiten Traktor for so long and now i can't run it! well time to upgrade for wathever is the new version of OS for the Macbook!!!
Lang Abriel
20.02.2013
Originally Posted by DJKeyWee
The slow browser search/refresh seems to be "solved" now. About time
Always thought it was just my setup....thank god. It was so bad that my waveforms would stop moving.
Lisa Lochotzki
20.02.2013		The slow browser search/refresh seems to be "solved" now. About time
Alphonso Deitchman
20.02.2013		You can always sort by key and then add Camelot notation to the comments in bulk if that's what you're used to.
Nedra Fresneda
20.02.2013
Originally Posted by loverocket
why did they use a weird KEY coding? How do you read it?
MiK has the license for Camelot noting. The one Traktor uses works in the same way (m=A and d=B). If you don't like it you can always change it to display flat/sharp
Jerica Salava
20.02.2013		why did they use a weird KEY coding? How do you read it?
Madison Luvisi
20.02.2013		Is anyone having problems loading there Collection with this release?. Ive tride numerous times by deleting the 2.6.1 folder and retrying it just hangs at loading collection. But works when i set to no collection @ launch ?
Ned Somerset
20.02.2013
Originally Posted by dubyou
Sorry I should have been more clear, I am referring to the Mac update, as in 10.7
app store. Just google it. osx 10.7 first link. You will have to pay.
Dick Korus
20.02.2013
Originally Posted by padi_04
I find it quite odd that they pushed the min reqs up in a X.X.1 update. Sucks for people who can't run lion :/



Applications>Native Instruments>Service Center
Sorry I should have been more clear, I am referring to the Mac update, as in 10.7
Ashanti Andreacchio
20.02.2013		Love the key detection and comparing to Mix in key Traktor naming is a bit different Aminor in MIK is named 8A in Traktor it's named 1m. But I did not have to reanilyze andy track so it wont make any diferace to the way I'm used to use MIK as the wheel functions the same only the numbers start at a differant note it will still be 7 1/2 notes or a 5.th between 1 and 8
Nedra Fresneda
20.02.2013		I find it quite odd that they pushed the min reqs up in a X.X.1 update. Sucks for people who can't run lion :/

Originally Posted by dubyou
Where do I go to get the update for Mac? Noobie when it comes to apple computers/ laptops
Applications>Native Instruments>Service Center
Dick Korus
20.02.2013		Where do I go to get the update for Mac? Noobie when it comes to apple computers/ laptops
Ned Somerset
20.02.2013		Same problem Photojojo. Time for the upgrade
Leeanna Ayla
20.02.2013
Originally Posted by antifmradio
This is just crazy timing. I almost never open my SERVICE CENTER for updates and just a couple days ago i did it.
There were no updates for TP2. Until the next morning? hahahaha
ill check this out toevening .
Sometimes it doesn't show up in Service Center right away. I had to DL it from the NI site.

https://www.native-instruments.com/i...newsletter&L=1

You will have to log in.

This sucks for me though, guess I finally have an excuse to upgrade.

Libbie Orion
20.02.2013		This is just crazy timing. I almost never open my SERVICE CENTER for updates and just a couple days ago i did it.
There were no updates for TP2. Until the next morning? hahahaha
ill check this out toevening .
Donovan Mandy
20.02.2013		Can't believe I just paid for an upgrade to MixedinKey...
Albertina Fay
20.02.2013
Originally Posted by padi_04
That hasn't changed sadly. Closes you can get is mapping "Browser>List>Jump to current track" and it will show the last track you loaded, same as pressing Cmd+L in iTunes (I use the same shortcut in Traktor)
sucks that something so simple gets overlooked, but on the other hand, great tip!! I never thought of this.
Nedra Fresneda
20.02.2013		That hasn't changed sadly. Closes you can get is mapping "Browser>List>Jump to current track" and it will show the last track you loaded, same as pressing Cmd+L in iTunes (I use the same shortcut in Traktor)
nayit ruiz jaramillo
20.02.2013
Originally Posted by padi_04
One of my tracks made a little cameo on the article as well hehe. Too bad they chopped the screenshot and none of the newer ones show.

Nice...!!!
Albertina Fay
20.02.2013
Originally Posted by padi_04

padi, can you please test the following for me? i have been hoping for NI to add this funcionality forever, but have been to lazy to explain. lol

select a track (any track) in the browser view, then sort by any of the available fields displayed.... (let's say BPM)

when you click to sort by BPM, does the track you selected disappear from the songs shown on the browser? I would love for it to behave like iTunes where it keeps the selected track highlighted and somewhere in the current view so you can see the tracks before and after it (or above / below).

the way it works now, it keeps the track selected, but does not keep it displayed in the window.

Do I make sense?
Nedra Fresneda
20.02.2013		One of my tracks made a little cameo on the article as well hehe. Too bad they chopped the screenshot and none of the newer ones show.

<< Back to General DiscussionReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy