Hercules RMX Mappings 4 DECKS w/ Korg Nanos

Home :: Post and find Controller Mappings :: Hercules RMX Mappings 4 DECKS w/ Korg NanosReply
Hercules RMX Mappings 4 DECKS w/ Korg Nanos
Posted on: 31.08.2009 by Joannie Brague
Hey Everyone,

I've been workingon updating my Hercules RMX mappings. These mappings also include mappings for the Korg Nanopad and NanoKontrol as well as the Hercules RMX all in one file.

Check out the tutorial on YouTube, there you will also find the files you need to download.

Enjoy!
Priscilla

You Tube Video Link:
http://www.youtube.com/watch?v=TYHgJGXgH2s

Direct Download Link:
http://dl.getdropbox.com/u/1130745/H...20Mappings.zip


Big thanks to Ean and everyone else in this community for sharing knowledge.
Carisa Kilpack
25.07.2010		Bonjour
Carisa Kilpack
25.07.2010		Bonjour
Carisa Kilpack
25.07.2010		Bonjour
Carisa Kilpack
25.07.2010		Bonjour
Dell Machain
03.01.2011
Originally Posted by armyofme4340
I do have a 1.2 ver. but i haven't made it live. if your interested i'll send you a download link.
i wiould greatly appreciate that too
Carisa Kilpack
25.07.2010		Bonjour
Joannie Brague
26.01.2010
Originally Posted by haze324
Yep, the utility was the trick. Thanks.

As far as scratching goes, I believe a decent solution would be for it to work similar to how the VDJ software it comes with. You press the scratch button (or any other one) and it activates scratching on the jog wheels. You can do some pretty neat scratching even though they are not time sensitive. I also like the ability to spin back or fwd a track and drop a cue point while the song is play. I tried to mess around and mimic the settings the tsi file has from hercules that requires you to hold the stop button down in order to scratch. I had no luck. Need to check out some more tutorials on settind up modifiers.
Yes I understand what your saying. Virtual DJ uses a different technique for "scratching" with traktor once you turn scratch on the track stops, so really it's like a momentary scratch button.
Julissa Serrone
27.01.2010
Originally Posted by armyofme4340
There is no real way to have a reliable scratch, because the jog wheels are not touch sensitive. I tried to map it in the past with minimal results.

If anyone figures it out please post for other readers, as I am not packing an arcade edition and stopped mapping the rmx.
Yep, the utility was the trick. Thanks.

As far as scratching goes, I believe a decent solution would be for it to work similar to how the VDJ software it comes with. You press the scratch button (or any other one) and it activates scratching on the jog wheels. You can do some pretty neat scratching even though they are not time sensitive. I also like the ability to spin back or fwd a track and drop a cue point while the song is play. I tried to mess around and mimic the settings the tsi file has from hercules that requires you to hold the stop button down in order to scratch. I had no luck. Need to check out some more tutorials on settind up modifiers.
Joannie Brague
25.01.2010
Originally Posted by haze324
I figured it out after going thru everything in traktor. Its part of the RMX software tool. When you open it, its a function to determine the volume cut during mic use or to cancel the function. Works perfect now.

Scratching ---- there's no map for that under this mapping. I've been trying to create my own when I hit source 1 but im not having any luck. The standard map from Hercules lets you scratch if you hold down the stop button. I would much rather hit the source button and leave the scratch function turned on if possible. I've looked at a few how-to's but no luck. Any ideas how to do this?

Thanks!
There is no real way to have a reliable scratch, because the jog wheels are not touch sensitive. I tried to map it in the past with minimal results.

If anyone figures it out please post for other readers, as I am not packing an arcade edition and stopped mapping the rmx.
Joannie Brague
25.01.2010
Originally Posted by pfef
Everything is great except I can't get Jog wheels to scratch in any of the modes.....Any Ideas?
Sure. I had this problem just open up the utility that came with the hercules (RMXCONTROLPANEL) and there you will see an option to change line 1-2 from MIC to line in just change it to line in and you shouldn't get any problems.
Julissa Serrone
25.01.2010
Originally Posted by tombruton69
you cannot get round the mic function unless you use another sound card. as it effects the soundcard the button does not traktor
I figured it out after going thru everything in traktor. Its part of the RMX software tool. When you open it, its a function to determine the volume cut during mic use or to cancel the function. Works perfect now.

Scratching ---- there's no map for that under this mapping. I've been trying to create my own when I hit source 1 but im not having any luck. The standard map from Hercules lets you scratch if you hold down the stop button. I would much rather hit the source button and leave the scratch function turned on if possible. I've looked at a few how-to's but no luck. Any ideas how to do this?

Thanks!
Ilene Howson
29.12.2009
Originally Posted by baldy
Try my map.... It's just above your post...

You just press the cue buttons to switch decks (no neeed to hold down)
He there,

Thanks for the quick reply.
I just used your mapping but now I have a diffrent problem. When I control Deck A the same happen with Deck C and when I control Deck B the same happen with Deck D.

When I press the the CUE buttons it dont make anny diffrence.

I feel I am verry close.. I believe I just must make some changes but wich...

Thanks in advance!

Cheers Mobb Deep
Dell Machain
03.01.2011
Originally Posted by armyofme4340
I do have a 1.2 ver. but i haven't made it live. if your interested i'll send you a download link.
i wiould greatly appreciate that too
Kera Svacina
25.11.2010		Hi Priscilla:

i like videos .... please i need your tsi for RMX (pc)


I can not download ... if you will kindly please send me my e [email protected]

Greetings from Ecuador
Fher
Lonnie Ortyl
17.11.2010		Hi Priscilla

I got the hercules RMX and traktor v 1.2.4.... I loved how you mapped how I get the tsi

ex mapping

source 1 to advantage effects ... remenber ?

thank you
Carisa Kilpack
25.07.2010		Bonjour
Candace Carmouche
02.06.2010		hey im almost done fixing your hercules mapping. you need to get in touch with me so i can make sure i have everything setup the way you liked it and then you can update your file downloads since people keep asking.

ive fixed the toggle for decks ab and cd as well as the scratch button toggle. i still need to figure out how to fix the issue where the cursor gets stuck in the search box. but im working on it.
Candace Carmouche
01.06.2010		hey Priscilla

no chance you are still updating this mapping i take it? having some raging problems now that i only have 1 summer class and can actually spend time with my gear again.
Alexandra Nerby
29.03.2010		Would this mapping also work for the Steel?
Whitney Fazendin
28.01.2010		Heya Priscilla

First off, great work on the mappings and thanks again for sharing the results of your hard work here and on utube.

Tried out your RMX mappings and love what you've done with the multiple functionality of effects and control of 4 decks, but I'm getting Traktor Pro (1.2.1) freezes on my XP laptop and with the play buttons on the RMX after using the jogwheel scroll function in browser mode. This doesn't happen with the Hercules website mapping. Any ideas why this may be happening?

Would love to be able to use your setup for live gigs with the RMX but I'm now believeing of investing in another controller (the VCI-100SE you recommended on your utube channel is one possibility).

Many thanks

Giff
Julissa Serrone
26.01.2010		I read a post of someone on the Native Instruments community asking the same thing. Gonna try and figure a work around.

Either way, thanks for a creating a bad ass map for the RMX!
Joannie Brague
26.01.2010
Originally Posted by haze324
Yep, the utility was the trick. Thanks.

As far as scratching goes, I believe a decent solution would be for it to work similar to how the VDJ software it comes with. You press the scratch button (or any other one) and it activates scratching on the jog wheels. You can do some pretty neat scratching even though they are not time sensitive. I also like the ability to spin back or fwd a track and drop a cue point while the song is play. I tried to mess around and mimic the settings the tsi file has from hercules that requires you to hold the stop button down in order to scratch. I had no luck. Need to check out some more tutorials on settind up modifiers.
Yes I understand what your saying. Virtual DJ uses a different technique for "scratching" with traktor once you turn scratch on the track stops, so really it's like a momentary scratch button.
Julissa Serrone
27.01.2010
Originally Posted by armyofme4340
There is no real way to have a reliable scratch, because the jog wheels are not touch sensitive. I tried to map it in the past with minimal results.

If anyone figures it out please post for other readers, as I am not packing an arcade edition and stopped mapping the rmx.
Yep, the utility was the trick. Thanks.

As far as scratching goes, I believe a decent solution would be for it to work similar to how the VDJ software it comes with. You press the scratch button (or any other one) and it activates scratching on the jog wheels. You can do some pretty neat scratching even though they are not time sensitive. I also like the ability to spin back or fwd a track and drop a cue point while the song is play. I tried to mess around and mimic the settings the tsi file has from hercules that requires you to hold the stop button down in order to scratch. I had no luck. Need to check out some more tutorials on settind up modifiers.
Joannie Brague
25.01.2010
Originally Posted by haze324
I figured it out after going thru everything in traktor. Its part of the RMX software tool. When you open it, its a function to determine the volume cut during mic use or to cancel the function. Works perfect now.

Scratching ---- there's no map for that under this mapping. I've been trying to create my own when I hit source 1 but im not having any luck. The standard map from Hercules lets you scratch if you hold down the stop button. I would much rather hit the source button and leave the scratch function turned on if possible. I've looked at a few how-to's but no luck. Any ideas how to do this?

Thanks!
There is no real way to have a reliable scratch, because the jog wheels are not touch sensitive. I tried to map it in the past with minimal results.

If anyone figures it out please post for other readers, as I am not packing an arcade edition and stopped mapping the rmx.
Joannie Brague
25.01.2010
Originally Posted by pfef
Everything is great except I can't get Jog wheels to scratch in any of the modes.....Any Ideas?
Sure. I had this problem just open up the utility that came with the hercules (RMXCONTROLPANEL) and there you will see an option to change line 1-2 from MIC to line in just change it to line in and you shouldn't get any problems.
Julissa Serrone
25.01.2010
Originally Posted by tombruton69
you cannot get round the mic function unless you use another sound card. as it effects the soundcard the button does not traktor
I figured it out after going thru everything in traktor. Its part of the RMX software tool. When you open it, its a function to determine the volume cut during mic use or to cancel the function. Works perfect now.

Scratching ---- there's no map for that under this mapping. I've been trying to create my own when I hit source 1 but im not having any luck. The standard map from Hercules lets you scratch if you hold down the stop button. I would much rather hit the source button and leave the scratch function turned on if possible. I've looked at a few how-to's but no luck. Any ideas how to do this?

Thanks!
Marguerite Truka
25.01.2010		you cannot get round the mic function unless you use another sound card. as it effects the soundcard the button does not traktor
Jayne Watland
25.01.2010		Everything is great except I can't get Jog wheels to scratch in any of the modes.....Any Ideas?
Julissa Serrone
23.01.2010		This mapping is great!! Much better than anything else out there. Thanks.

Question:

When I press the mic button to toggle thru the effects, the actual mic function works. My volume goes down. The function to search thru my fx's does as well. How can I eliminate the mic function. I tried going to the controller setting and deleting anything set to button "46" but there was only the modifier.

Any suggestions. Thanks!
Ilene Howson
09.01.2010		Can maby someone tell what button / object / action the switching activates so I can change it myself?

Greatings!
Ilene Howson
29.12.2009
Originally Posted by baldy
Try my map.... It's just above your post...

You just press the cue buttons to switch decks (no neeed to hold down)
He there,

Thanks for the quick reply.
I just used your mapping but now I have a diffrent problem. When I control Deck A the same happen with Deck C and when I control Deck B the same happen with Deck D.

When I press the the CUE buttons it dont make anny diffrence.

I feel I am verry close.. I believe I just must make some changes but wich...

Thanks in advance!

Cheers Mobb Deep
Zina Bough
28.12.2009
Originally Posted by Mobb Deep
Hi there,

I was looking for 4 deck confige file for the RMX + Traktor.

Quickly i came here and downloaded it .

I am using Traktor scratch pro 1.2.1 on a Windows laptop. The config is closely to perfect. I have the following problems:

- I have to hold the left CUE button to manage deck C
- I have to hold the right CUE button to manage deck B

I was scrolling thrue the mapping and changed some things but I am kind of new and it didnt work.

Does annybody knows what to do?

Thanks in advance

Cheers Mobb Deep

Try my map.... It's just above your post...

You just press the cue buttons to switch decks (no neeed to hold down)
Ilene Howson
29.12.2009		Hi there,

I was looking for 4 deck confige file for the RMX + Traktor.

Quickly i came here and downloaded it .

I am using Traktor scratch pro 1.2.1 on a Windows laptop. The config is closely to perfect. I have the following problems:

- I have to hold the left CUE button to manage deck C
- I have to hold the right CUE button to manage deck B

I was scrolling thrue the mapping and changed some things but I am kind of new and it didnt work.

Does annybody knows what to do?

Thanks in advance

Cheers Mobb Deep
Zina Bough
11.12.2009		Just thought I would share my version of Priscilla's mapping....

In a nutshell, here's a quick guide:

Cue buttons activate deck C and D (no change)
Stop buttons are mapped as CUE (no change)

Holding down source buttons activates filter mode and turning gain knobs adjusts

Holding down scratch and pressing source buttons changes the input source

Holding down scratch you can control the fx with the left eq knobs, and balance is D/W



Thanks for posting up your map initially... It was exactly what I was looking for as far as the 4 deck control goes...

Here's a quick question for everyone since I haven't upgraded TP1.01 to 1.2 .... Is it worth it? I mainly spin deep house and trance.
Divina Darneal
03.12.2009		It seems that solved the problem! thanks a lot!
Joannie Brague
04.12.2009		It could be that they have a soft takeover in the midi mapping, because I have them set up that way. This is because if I use the sync to keep all my decks in time the pitch fader will move in traktor but obviously not on the RMX, you have to go into the midi mapping window and search of the tempo command and click on it then uncheck SOFT TAKEOVER.

That should solve your problem. Let me know how that works out.
Divina Darneal
03.12.2009		Hey!

First of all, I wanted to congratulate you, awesome mapping

However, I do have a slight problem with the pitch faders...it seems that the reaction time of each fader is more than expected, so if I move the pitch slightly to alter the song's bpm, I get no response, and as I continue to move it, it suddenly catches up with the midi command and jumps by 5 or 6 BPM (enough to be noticeable) and it gets very annoying...

could this be because of my equiment? (DJTT mentioned once in an article about the cable sometimes being responsible for this) have you had the same issue?

cheers
Joannie Brague
09.10.2009		Um I had a problem with the pad before. They sent me a new one. But the problem was a button not the pad.

Although the new pad didn't seem as nice as my old one. I haven't really got into performing with 1.2, been really busy. I just wanted to update my mappings.

Look forward to checking out your vids.

Peace.
Vincent Durrance
10.10.2009		Finally got around to checking your vid and tsi out, its amazing how radically different our approach to 4D mixing is. I need to iron out some kinks, but when I do, Ill post a vid with a break down on how it works, and perhaps a set of instructions? Not sure. Question though, since 1.2 have you noticed the Kaos Pad is even less stable? Sometimes it refuses to acknowledge the touch activated midi message (not the x-y parameters, the signal that gets turned on when you touch it). Very wierd stuff, Ill be getting a powered usb hub to see if that fixes things. Sometimes the Pad just doesnt work and I need to unplug and replug during a set (annoying to say the least)
Joannie Brague
08.10.2009		Hey Everyone so I uploaded the complete files and made a quick video showing the updates. Here is a link to the files and i've attached the video.

Some minor upgrades but basically it's ready for 1.2 with modifiers and LED feedback working 100%

Enjoy
Priscilla

http://dl.getdropbox.com/u/1130745/N...ngs%20v1.2.zip

P.s If the video doesn't load give it a minute I just added it.

http://www.youtube.com/watch?v=ZGcL6hNuBhg

<< Back to Post and find Controller MappingsReply
  • Page:
  • 1
  • 2
  • >>
  • Total: 50

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy