kontrol x1 mapping question

Home :: Post and find Controller Mappings :: kontrol x1 mapping questionReply
kontrol x1 mapping question
Posted on: 23.01.2011 by Aprizal Rustarmadi
a wonder if somebody can help me tweak my kontrol x1 mapping to switch to full screen browser mode when scrolling through tracks like the djtt vci100se mapping. Id like it to switch back to normal track view mode after loading a track.

thanks for any assistance!
Demetra Pinizzotto
26.01.2011		another one.
How to map master select LED output.
Is also in the standard X1 mapping, but good to know, if you ever change it.
first picture is for the button assignment second for the LED

Master set to deck
Demetra Pinizzotto
26.01.2011
Originally Posted by JonathanBlake
What about posting more pix for us NNNNOOOOOOOOOOOOBBBS of the mapping page
had this one in my files already.
will be making some more soon, This mapping is standard in the X1 mapping, but it is explained how it works.

Advanced FX section, LED output

When buttons are mapped to specific effects (effect select) and you want the corresponding button to light up when the effect is selected. The LED controller range needs to be set to the place of the effect in the list
Effect: Delay, place in list: 1, range min. 1, range max. 1
Effect: beatmasher 2, place in list 15: , range min. 15, range max. 15
And so on.
The mapping goes as followed
 Add out
Demetra Pinizzotto
26.01.2011		another one.
How to map master select LED output.
Is also in the standard X1 mapping, but good to know, if you ever change it.
first picture is for the button assignment second for the LED

Master set to deck
Demetra Pinizzotto
26.01.2011
Originally Posted by JonathanBlake
What about posting more pix for us NNNNOOOOOOOOOOOOBBBS of the mapping page
had this one in my files already.
will be making some more soon, This mapping is standard in the X1 mapping, but it is explained how it works.

Advanced FX section, LED output

When buttons are mapped to specific effects (effect select) and you want the corresponding button to light up when the effect is selected. The LED controller range needs to be set to the place of the effect in the list
Effect: Delay, place in list: 1, range min. 1, range max. 1
Effect: beatmasher 2, place in list 15: , range min. 15, range max. 15
And so on.
The mapping goes as followed
 Add out
Demetra Pinizzotto
26.01.2011
Originally Posted by Jester.NZ
Hey mate. You need to add two extra commands, mapped to the browser knob and load button. For the left one it should look like this ..




Now when you scroll through tracks the view will change to Browser Mode



And when you load a track, the view will change back to Deck View.
Duplicate this for the right knob and you are good.
Remember also, SHIFT+LOAD toggles your view as well. Enjoy.
could you please repost this tutorial to the traktor mapping tips, tricks and questions thread
Leeanna Ayla
26.01.2011
Originally Posted by joeblack949
Heavily Self Modded Audio 8
Originally Posted by Jester.NZ
hi joe what did you do to your ?
Curious as well
Lin Danek
26.01.2011
Originally Posted by Jester.NZ
south africa has a team?
Apparently we do, but I'm not sure if we have a coach 'tho
Demetra Pinizzotto
26.01.2011		another one.
How to map master select LED output.
Is also in the standard X1 mapping, but good to know, if you ever change it.
first picture is for the button assignment second for the LED

Master set to deck
Demetra Pinizzotto
26.01.2011
Originally Posted by JonathanBlake
What about posting more pix for us NNNNOOOOOOOOOOOOBBBS of the mapping page
had this one in my files already.
will be making some more soon, This mapping is standard in the X1 mapping, but it is explained how it works.

Advanced FX section, LED output

When buttons are mapped to specific effects (effect select) and you want the corresponding button to light up when the effect is selected. The LED controller range needs to be set to the place of the effect in the list
Effect: Delay, place in list: 1, range min. 1, range max. 1
Effect: beatmasher 2, place in list 15: , range min. 15, range max. 15
And so on.
The mapping goes as followed
 Add out
Latoria Kavulich
26.01.2011		sure
Demetra Pinizzotto
26.01.2011
Originally Posted by Jester.NZ
Hey mate. You need to add two extra commands, mapped to the browser knob and load button. For the left one it should look like this ..




Now when you scroll through tracks the view will change to Browser Mode



And when you load a track, the view will change back to Deck View.
Duplicate this for the right knob and you are good.
Remember also, SHIFT+LOAD toggles your view as well. Enjoy.
could you please repost this tutorial to the traktor mapping tips, tricks and questions thread
Demetra Pinizzotto
26.01.2011		hey, I will start a new thread for these kinds of mini tutorials.
Everyone can add their own tricks, tips and questions. This way one single thread can be alot of help to everyone.
I will quote my two posts too.

see you guys there

thread is here
Leeanna Ayla
26.01.2011
Originally Posted by joeblack949
Heavily Self Modded Audio 8
Originally Posted by Jester.NZ
hi joe what did you do to your ?
Curious as well
Lin Danek
26.01.2011
Originally Posted by Jester.NZ
south africa has a team?
Apparently we do, but I'm not sure if we have a coach 'tho
Lin Danek
26.01.2011		I am in noob heaven (12 vestal virgins would help 'tho)
Thank you Gentlemen.
Demetra Pinizzotto
26.01.2011		another one.
How to map master select LED output.
Is also in the standard X1 mapping, but good to know, if you ever change it.
first picture is for the button assignment second for the LED

Master set to deck
Demetra Pinizzotto
26.01.2011
Originally Posted by JonathanBlake
What about posting more pix for us NNNNOOOOOOOOOOOOBBBS of the mapping page
had this one in my files already.
will be making some more soon, This mapping is standard in the X1 mapping, but it is explained how it works.

Advanced FX section, LED output

When buttons are mapped to specific effects (effect select) and you want the corresponding button to light up when the effect is selected. The LED controller range needs to be set to the place of the effect in the list
Effect: Delay, place in list: 1, range min. 1, range max. 1
Effect: beatmasher 2, place in list 15: , range min. 15, range max. 15
And so on.
The mapping goes as followed
 Add out
Latoria Kavulich
26.01.2011		hi joe what did you do to your
Heavily Self Modded Audio 8
?
Deloras Hirchert
26.01.2011		oh and i scored a casio ptouch labeler off amazon.com for 6 bux and the clear tape is awesome for labelling buttons that light up, the white tape perfect for labelling buttons you cant label over 9mm which is standard allows for 2 lines of text as well
Deloras Hirchert
26.01.2011		I'm an x1/maschine/traktor midi mapping in general guru. honestly it just comes from using the shit for so many years i've lost track Maschine and its controller pages and setting up virtual devices for the same maschine to give you seperate modifier namespaces so to speak, that's where its at right now and maschines encoders with resolution up to 3600 CPR, how did they even achieve that? are they optical?

NI makes the best controllers/gear imo, the feedback and the 2 levels of brightness for on and off so you can see it in the dark club regardless owned my heart. love how kontrol x1's endless stepper rotary(basically acts like a increment and a decrement button with a step of +/-1 works perfect for beatjumping through a track, browsing your playlist/etc. wish there was the option to do that on maschine, i want a dedicated knob on maschine that lets me scrub as an endless rotary in relative mode at the highest resolution.

Oh and heres a cool trick i do, if i assign the same function on maschine as the kontrol one i'll use the same midi channel and cc/note so the buttons change on both simultaneously, also remapped cue/rel to cuepoint 1(my load cuepoint always) and could never live without that
Latoria Kavulich
26.01.2011		south africa has a team?
Lin Danek
26.01.2011
Originally Posted by JesC
sir you are the x1 expert.
...no he isn't - he IS X1...

[but his rugby team (yes, RUGBY) is still going to get hammered by the Boks]
Cristian Carmona
25.01.2011
Originally Posted by Jester.NZ
start a new thread with your questions and i'll see what i can do. I'm not the only "expert" around here mate, far from it haha
sir you are the x1 expert.
Latoria Kavulich
25.01.2011		start a new thread with your questions and i'll see what i can do. I'm not the only "expert" around here mate, far from it haha
Lin Danek
24.01.2011
Originally Posted by Jester.NZ
Wicked. Enjoy
:eek: NOOB ALERT :eek:

Your blood deserves to be bottled Jester.

What about posting more pix for us NNNNOOOOOOOOOOOOBBBS of the mapping page, as you did above?

Then you'll be Kevening ed!
Latoria Kavulich
24.01.2011		Wicked. Enjoy
Aprizal Rustarmadi
23.01.2011		had the values backwards....i got it now. thanks again jester!
Latoria Kavulich
23.01.2011		You might have a mapping clash as well man. Works fine for me. Highlight the command and scroll through to see what else is mapped to the browse knob. Sometimes double mappings can screw with each other.
Aprizal Rustarmadi
23.01.2011		hey thanks jester, i really appreciate your help! thats how i have it mapped but the problem is for both deck A and B, it only switches to browser mode when i turn the infinity knob to the right (scrolling downward). turning the knob to the left: 1. does not activate brower mode and 2. switches the mode back to deck view if in browser view. i need it to remain in browser mode when scrolling in either direction and only switch back to deck view when loading a track. thanks again for your further assistance !!
Latoria Kavulich
23.01.2011		Hey mate. You need to add two extra commands, mapped to the browser knob and load button. For the left one it should look like this ..




Now when you scroll through tracks the view will change to Browser Mode



And when you load a track, the view will change back to Deck View.
Duplicate this for the right knob and you are good.
Remember also, SHIFT+LOAD toggles your view as well. Enjoy.

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy