Hercules RMX - Traktor Pro 1.2(with controls for 4 decks, 4 FX banks, Fader FX Mode)
Home :: Post and find Controller Mappings :: Hercules RMX - Traktor Pro 1.2(with controls for 4 decks, 4 FX banks, Fader FX Mode)Reply
Hercules RMX - Traktor Pro 1.2(with controls for 4 decks, 4 FX banks, Fader FX Mode) Posted on: 21.11.2009 by Suzann Greenbaum Hi,Here | |
| Chasidy Heckenbach 19.09.2011 |
Originally Posted by chikosneff
i did replace the knobs tho - for more rubbery/thinner/taller ones. i released a full on multi-page mapping for my midimasher for full 2 deck control with nothing more than a single lpd8... and also a config that turns one into midifighter 4bank emulation mode - using PAD mode for the top 2 rows and CC mode for the bottom two - so i can use it with the instant grat tsi. having 2 would be great... push them together for a midifighter/apc type layout or use them vertically each side of a mixer for extra deck controls... or any which way |
| Lilliam Keehr 19.09.2011 |
Originally Posted by zestoi
OT: are you happy with the LPD8? |
| Chasidy Heckenbach 18.09.2011 |
Originally Posted by chikosneff
|
| Chasidy Heckenbach 19.09.2011 |
Originally Posted by chikosneff
i did replace the knobs tho - for more rubbery/thinner/taller ones. i released a full on multi-page mapping for my midimasher for full 2 deck control with nothing more than a single lpd8... and also a config that turns one into midifighter 4bank emulation mode - using PAD mode for the top 2 rows and CC mode for the bottom two - so i can use it with the instant grat tsi. having 2 would be great... push them together for a midifighter/apc type layout or use them vertically each side of a mixer for extra deck controls... or any which way |
| Lilliam Keehr 19.09.2011 |
Originally Posted by zestoi
OT: are you happy with the LPD8? |
| Chasidy Heckenbach 18.09.2011 |
Originally Posted by chikosneff
|
| Lilliam Keehr 18.09.2011 | Hi I'd like to ask you: how did you set the source buttons as modifiers? If I try to do it they work for traktor as modifiers but the buttons continue to work also as a source changer and it switch to the external input source, so I get my deck muted. I'm afraid this is an hardware feature, I own an MK4. Thank you! |
| Chasidy Heckenbach 31.05.2011 | in windows going to "file > controller manager > import" (import btn is right at the bottom) lets you select/load any tsi. it will wipe any settings you currently have setup (which i guess is what you want anyway) so you could always do an "export" from that page . from that page you can also do "Add.. > Import" (Add... is near the top) to add new settings to what you currently have without wiping the existing ones. |
| Tresa Mehner 31.05.2011 | Hi everybody, I am kind of a newbie in this dj world Ive never mapped anything by myself (people did it for me...) I'm mixing with traktor pro 1.2.4 and a standard mapping for the rmx and I was looking for a new mapping to controls the effects better. Yours seem very interesting but I just don't know how to set it in traktor if anyone have a link that shows how you to put this mapping in traktor I would be very thankful. Peace |
| Digna Delaflor 19.07.2010 | Uncle...i could never get 1.6 and 1.5 to work ....just 1.2....but months later now ive got trak 1.2.4 they work fine so today is my first mess about with em......and i thought id let u know....they are top notch m8....Thanks and keep it up......GeeBeeH |
| Suzann Greenbaum 13.07.2010 | @ djrsun Look on the every first page. There's an explanation (with a video of what i tried to copy) and a picture of Hercules RMX. All the buttons/inputs/pots are all labeled according to the midi signal they spit out. My explanation take that into account (it could be written better but, meh). |
| Marvis Geerling 28.06.2010 | Dude, thank you! Its so nice to know there are people who care about beginners, or people who just plain can't afford a VCI! |
| Rene Zelko 17.06.2010 | Where can I find an image of your layout for what buttons do which functions? |
| Sheryll Pasquin 27.05.2010 | Hey I just loaded this up, and have barely had a chance to look at what kind of stuff you have set up. However, right off the bat I've got the weirdest problem. CC 11, the play/pause key, isn't firing at all, though 12 and 13 are fine (the CUE and stop.) Seems like your mapping's set up just fine for it, but it just won't activate. Problem's the same on the other side of the deck with CC 35. I also just tested my old mapping (as I just updated to 1.2.1) and it seems to run the play/pause just fine. I'll get you some feedback about the scratch and FX modes when I have a chance to figure them out, but right now I'm trying to fix the play/pause mapping. edit: I just realized it's because 1.2 lets two mappings overlap that I couldn't use CC11 or CC35 correctly. Also, I don't know if it was intentional, but when in FX mode, the jog wheel on the left is only set to on when turning counter-clockwise, diminishing the effect. Makes for some wacky build-downs, but maybe not what you intended. otherwise a fun map. thanks |
| Suzann Greenbaum 26.05.2010 | Sorry I want someone to add the jog wheel search function seen in this video http://www.youtube.com/watch?v=CTDVqrPJJLI @ 3:33 then this will be much closer to complete. |
| Susannah Cordner 20.05.2010 | Have you scoped Armyofme on youtubes mappings? Hers had badass full screen browser that turned the right jog wheel into a scroll through function and once you loaded the track, it went back to the normal screen and all the old functions were back. I'd try scoping her mapping. I'll try to post the mapping here when I get home. -Bryce p.s. I use the 1.6 now and just hold the STOP button to pitch bend. Thnx! |
| Suzann Greenbaum 20.05.2010 | Everyone, I've only posted two versions of my mapping in this post. The 1.6 version makes the jog wheels respond like a turntable platter. For that not to happen, or to get the pitch bend back you now have to hit hold stop. I don't generally use that version ever. liveperformerz(trini) requested that change so I made that file for him. The tsi file that I'm posting now will have that feature removed. Has anyone figured out how to add a browser search function to this mapping? I still need it and there are blank commands in each of these files to add it. I just can 't get it to work without there being some type of macro-overlap with other jog wheel commands. If you have any questions shoot me an email. |
| Mercy Dudik 20.05.2010 | If any of you are interested I'm working on a map from the ground up using ideas from this map and others. There are some features on it some will hate but I am making it to suit my style. I should have it up here within the next week or so, just need to find the time to finish it up. |
| Kimbery Dieffenbach 19.05.2010 | Long time reader of the site but just finally signed up to the community
s to say good looking out. Stopped spinning years ago, but couldnt resist the urge and picked me up one of these a few months back. Been having a lot of fun with it but was getting frustrated trying to map it myself from scratch (so much potential, so little knowledge of mapping on my part tho...def need to hit the 'books'). Looking forward to trying this out later this week! |
| Jerome Frana 17.05.2010 | Whe could do something with a shift button if this works for the rmx ? |
| Susannah Cordner 17.05.2010 | That's the only downfall I've found on it too. I HAVE to hit the sync button now.... and I try to NOT do that. Any help would be amazing! |
| Jerome Frana 14.05.2010 | Thank you for this very good mapping. Could you ore some one else telll me if i can pitch ben with the jogs ? Now it is always in scratch mode. Thanks |
| Mercy Dudik 08.05.2010 | Try downloading 1.6 and see if it works for you and let me know! |
| Susannah Cordner 07.05.2010 | I tried out the 1.2 mapping today and thus far I really enjoyed it. JUST found out about the 1.6 version. I will try it out tomorrow at a party and test it real world. Great mapping already from just practicing on it. I've been using armyofme's mapping off youtube for a minute. I like the hybrid vci style effects controlling of yours though. |
| Mercy Dudik 06.05.2010 | I mean once I import your file and I go onto the control manager and select your map there are no commands. The version posted on the first page works and has all the commands in there but that 1.6 version doesn't. |
| Suzann Greenbaum 06.05.2010 | What do you mean by blank? Do you have any control over traktor once the file is loaded at all? |
| Ahmed Georgopoulos 06.05.2010 | did u configure the in and out ports |
| Mercy Dudik 04.05.2010 | Sorry to dig up a 2 month old thread but can anyone get the 1.6 version to work? When I import it all the midi assignments are blank |
| Jayne Watland 10.03.2010 | Although the jog wheels work in opposite directions for the fader FX. On the right deck if i go up on jog wheel it turns on but is opposite on the left wheel. Is it meant to work like that? |
| Jonnie Soldati 04.03.2010 | @ |
| Suzann Greenbaum 03.03.2010 |
Originally Posted by DJ Phatso
This mapping can be adpated for the STEEL. It will not work completely as is since the STEEL sends out slighty different MIDI signals. I can look at redoing one for you but it will take a little time. Since i don't have a STEEL you'll have to test it for me. I don't believe that there is anything wrong with your hardware. It's just diffent then the RMX. let me know if you're interested in testing this file for me. |
| Ahmed Georgopoulos 03.03.2010 | once again thumbs up great mapping unkle , very vci_ish now Got some ideas 4 it to we will discuss it on the group thread . kool? one question wat do the stop keys do now? |
| Celsa Courtemanche 03.03.2010 | I'm starting to believe that there might be something wrong with the hardware. Can you test it as described in this document ? http://ts.hercules.com/faqs/eng/her_eng_00366.pdf |
| Jonnie Soldati 03.03.2010 | Hi, Tried it and it didn't work. Can't get to deck C&D. Thought it might be the USB port power issue (macbook 13 black) but that made no difference. Wiped all my other controller maps for traktor and reinstalled it, but that didn't work. I've had enough. Thanks for your help though, much appreciated. |
| Celsa Courtemanche 03.03.2010 | If you look at the end of the document included with the MIDI profile, you'll see that the APPLY CTRL button is simply a shift function for the 2 top encoders: in the DECK A positions, they send CC 65 & CC 66, CC 69 & CC 70 in SELECT position, and CC 67 & CC68 in DECK B position. As for the rest of the controls, everything that is common to both consoles have the same MIDI assignment (transport, EQ, faders, etc). The major difference are the encoders and the FX/Loop which are doubled because of the SHIFT buttons. So let's say you try this 4 deck mapping, simply leave the SHIFT buttons OFF, and you'll have exactly the same configuration as if you had an Rmx. As for my personal mapping, it,s noting fancy. Since I use loops more than anything, I simply remapped all the numpads buttons to trigger cue points. The rest is pretty much the default Hercules mapping. |
| Jonnie Soldati 04.03.2010 | Hi DJ Phatso, The only difference I can see is that the Steel has "shift" buttons instead of "source" buttons on the RMX and the RMX has no "Apply Control on" deck selector. So the only questions I need to answer to use your mapping is - what does the "Apply Ctrl on" selector do on the Steel (in midi terms) / what should I have it set at so it doesn't interfere with your mapping Thanks again. |
| Jonnie Soldati 04.03.2010 | Hi DJ Phatso, Have you got a picture of your mapping - showing what does what? and, (sorry for bugging you) what are the major differences between the Steel and the RMX apart from the integrated audio, i.e. what buttons are missing / present? from what I've found out the RMX has less buttons than the steel? Thanks for your help. |
| Celsa Courtemanche 04.03.2010 | The MIDI configuration is pretty much the same (beside the obvious differences) between the two consoles, so you should be good. |
| Jonnie Soldati 03.03.2010 | I'm looking at a Herc Steel at the moment, would this mapping work (mainly) on that controller? The only one I can find on the web sucks, has multiple(bad) interconnections between controllers and looks like it's going t take ages to debug it. Are the controllers very different? or would your mapping be a better starting point? Thanks for your help |
| Ahmed Georgopoulos 03.03.2010 | kool bro get back to u on it asap |
<< Back to Post and find Controller MappingsReply