Vestax Spin Traktor 1.2.3 TSI Fully Working
Vestax Spin Traktor 1.2.3 TSI Fully Working Posted on: 14.01.2010 by Desire Kwiek Ok guys!Here's the most stable and fully working map for the moment. There were some problems and functionality issues with DJBalla's map so I started from scratch. The FX section is fine tuned to suit my needs so if someone wants it changed - just say so Loop section works as follows: Pressing "AUTO" sets auto loop, pressing "SET Cue" sets cue and loop in, pressing In/Out sets Loop Out I've set up the In/Out LED to indicate when the track is in loop. Freezes and bugs now occur very rarely ;] If you experience something weird --> drop a line here ;] So here it is! Enjoy! New version available! See the end of the post 1.0 -- > Attachment 1934 - The Sync Button now flashes with the tempo of the track - Minor improvements - Fixed LEDs MIDI Range issue New Stuff: - Shift + Mic Pitch controls Effect 3 - Shift + Left Jog Wheel moves Up and Down through the track list - Automix + Jogwheels - Controls Dry/Wet on effects! Cooler then you might believe ;] Even More New Stuff (Ver. 1.1) - added LED notification when track is in AUTO Loop - AND FINALLY, after 5 hours of misery... the channel level meters It was a real mission to get them working! - Minor changes Cheers P.S. Quite a messy post this is... I've been posting, reposting and editing it for days LATEST TSI Vestax Spin by oldfashioned - Full MAP for Traktor 1.2.3 (ver. 1.4.3).tsi | |
| Remona Hinchberger 29.06.2010 | can someone please answer my above question? Thanks |
| Remona Hinchberger 28.06.2010 | If I have traktor scratch pro full version 1.2.4 will this work? |
| Lucia Boemer 25.06.2010 | Old fashioned, Great work, recently got a Spin, and am digging it. I'm looking into changing the fx mode into a "superknob" - where the fx on say segment 1 turn on all 3 fx in chained mode (as is) and then turn all 3 dials of the chained fx at the same rotation of the dry/wet platter. I'm gonna try to figure it out, but if anyone wants to chime in, or if you've already done something like this, please chime in. Thanks, |
| Sherice Fifelski 24.06.2010 | will this work for traktor pro 1.2.1 |
| Virgie Igler 20.06.2010 | I was wondering if anyone knows how to map the spin to be able to browse the playlists in traktor while holding the shift button, then when you let go of the shift button it stays on the selected playlist. Also, how do I map it so that when the vinyl button is pressed, the jog wheels control the filter levels i.e. dry/wet? thanks alot in advance. -BMO If I could get these two things on my mapping already I would be golden. |
| Leeanna Ayla 19.06.2010 | Go to the first post and download the tsi. Go to your preferences in Traktor and go to controller manager. Click the big import button and select the file you downloaded from the first post. It woud probably be a good idea to read the whole thread as I'm sure any problems you may have have more than likely been answered already. |
| Virgie Igler 19.06.2010 | you download one of the maps from here, and press import on traktor while under the midi section of the settings. if you're asking for how to do personalized mappings on your own, I have no Idea. But just give it time, eventually someone more knowledgeable will answer, this community is filled with computer genius'. |
| Junie Sidman 18.06.2010 | Hey guys I just got the Vestax Spin dj and was wondering if someone can tell me how to map the tractor software into my mac. Thanks in advance |
| Leta Hollensteiner 17.06.2010 | Been using your tsi for a few weeks now and it's never failed on me. Your work is much appreciated. Are you planning any other updates for it? Ta! Here's it being put to use (not very well though, sorry, it's all new to me ) http://www.youtube.com/watch?v=DBgIE0NgSfk |
| Carin Mcalevy 04.06.2010 | hey oldfashioned, i was wondering how to make advanced effects mode to work. like i have my traktor set to 4 effect bank with the top 2 being chained and the bottom advanced, however wen i press the shift function it me to control the wet/dry and the parameters but the effect itself is not activated. lastly id like to make a suggestion i was wondering if it was possible in the new mapping for the effects in that similar to the vci 100 choosing the effects for the chained effect using only the knob id like to make a suggestion for mapping shift+the pitch fader,mic fx and mic pitch to allow for scrolling and choosing effects without the need of touching the computer. thanks again for a great mapping |
| Zelda Verna 01.06.2010 | Hey oldfashioned, Did you ever manage to get the crossfader on/off cut settings working? |
| Leeanna Ayla 26.05.2010 |
Originally Posted by nicofirk
Originally Posted by oldfashioned
|
| Darby Belka 26.05.2010 | i m been using virtual djfor about a year now and recently got myself a vestax spin and i wonder if anyone has made or have the tsi for virtual?? thanks |
| Elma Pennel 09.05.2010 | DEAR DJTT MODERATOR I still can't access the final .tsi file kindly posted by Oldfashioned on the first page of this thread. Could you help me in this matter? It would be much appreciated. THANKS AGAIN FOR SHARING THIS! |
| Daphne Obiedo 08.05.2010 |
Originally Posted by djgee
|
| Elma Pennel 07.05.2010 | Hi all, For some reason de link to the LATEST TSI isn't working with me, and keeps redirecting to the login page. Is the access restricted or is this a browser issue? can someone help? Actually, it seems that re-positng the link on an other page would work, as I can access the older .tsi attachments. Many thanks |
| Celsa Courtemanche 06.05.2010 | @ DJ Nacho Check the Traktor User manual , Chapter 15.1 for an extensive guide to MIDI mapping within Traktor. |
| Brittni Effenberger 06.05.2010 | Thanks for the answer! I have been looking it, and i believe that i may be a modifier, because there is not button for it. It would be pleased if someone knows what modifier it is. |
| Harland Filipponi 06.05.2010 | dj_nacho...I believe you can fix this yourself very easily but changing the button setting from "On Hold" to "Toggle" within the Controller Manager. |
| Brittni Effenberger 06.05.2010 | Hi OldFashioned, i |
| Elma Pennel 02.05.2010 | LATEST TSI Vestax Spin by oldfashioned - Full MAP for Traktor 1.2.3 (ver. 1.4.3).tsi It seems this link is broken! Thanks for sharing this great work with neubies! |
| Elma Pennel 02.05.2010 | Dear Oldfashioned, I,ve just aquired a Spin and was very interested by your mappings! How can we access the .tsi files? It seems that as a new member, access is restricted despite repetitive logon. Please let me know. Thanks in advance, Nicofirk |
| Johnny Cull 30.04.2010 | Hey guys. I just got my Vestax Spin yesterday and im super noob. I was wondering if there was any way I could have the master come out of my computer speakers and the monitor come out of the headphones? |
| Rodger Mendis 24.04.2010 |
Originally Posted by DJ Phatso
|
| Nicky Chedister 24.04.2010 | I've got your SPIN mapping working perfectly on a fresh install of Traktor 1.2.6. One suggestion / question on a mapping that doesn't make sense to me -- which might be because I'm a newbie to Traktor. I understand you have the Automix button mapped to turn on or off the FX mode. But then you also have the "FX" button mapped to "FX on / off" -- i.e. if I push the automix button I can control the FX via the controls, but then there's a separate button for turning the FX on or off. Given that the FX can be turned on/off via the jog wheel, the FX button mapped to "FX on/off" seems redundant. It also would be very nice to have the FX button's LED used to notify you if you're in FX mode with the controller or not, as opposed to if FX is enabled or not (which is displayed for you in traktor) -- I have some trouble (as a newbie) getting in and out of FX mode while spinning -- I usually will play with the gains to see which mode i'm in based on whether the gain or filter turns. So, my suggestion -- if possible, make the FX button enter / leave the FX mode (the current function of the automix button in your mapping). FX on/off seems like a redundant feature not necessary -- just have FX on all the time when switching to FX mode, and bring it in/out like usual it via touching the jog wheel? And then hopefully use the FX button LED status to indicate whether you're in FX mode or not, as opposed to it's current redundant use, since there's a FX enabled/disabled indicator in traktor, but no other indicator that you're in FX mode in the controller. Unless of course there's something I'm missing about how FX are typically controlled, and if so, if someone could clue me in, greatly appreciated |
| Celsa Courtemanche 23.04.2010 | If you look at the mapping description, you'll see that the MIC FX knob of the SPIN is mapped to Traktor's Monitor MIX: - When all the way to the left, you will hear ONLY the deck if the HEADPHONE button is pressed (as in DJay) - at 12 O'clock, you'll have both the "Headphone" output, as well as the Main mix - All the way to the right, and you'll have only the main Mix |
| Rodger Mendis 23.04.2010 | I did that. Maybe my idea of pre-cuing in Traktor is different than on the SPIN with it's software..? With Vestax SPIN and DJay (the software that came with the mixer) I can essentially preview what's being played by pressing the headphone button on either side. Basically, either I hear one or the other side of the mixer, or I hear both sides (if I have both headphone "buttons" pressed down) In Traktor.. if I press the headphone button on the side that's playing but completely faded out (as in the crossfader is pushed all the way over to the other side of the mixer, I don't hear anything. Basically, I can only pre-cue something by fading it in, which is then heard live over the speakers, so there's really no way to preview a song. In short.. whatever is playing over the speakers, is heard in the headphones, if either the left or the right headphone buttons are pressed down.. it doesn't matter which side left or right, when one of the buttons is pressed, I can hear what's being played over the speakers. |
| Celsa Courtemanche 23.04.2010 | You're over-complicating things a little. If you go to Audio MIDI Setup, you'll see that the SPIN is seen by OS X as a 4 In /4 Out soundcard...Which mean it has all the Outputs necessary for pre-cueing. Knowing this, in Traktor Audio configuration: - You select the SPIN as Audio Device - For Output Routing for MASTER , select Output 1 & 2 for Monitoring, Select Output 3 & 4 As simple as that! |
| Rodger Mendis 23.04.2010 | Pre-cuing still does not work right for me, i'm using a mac so maybe that has something to do with the problem. ASIO4ALL isn't OS X friendly but I have gone under Applications>Utilities>Audio MIDI Setup and disabled the integrated audio devices. Has anyone with a Mac successfully gotten pre-cuing to work..? |
| Georgiana Surtees 21.04.2010 | Thank you Oldfashioned!! Your maps have changed the way I play forever. Cheers! |
| Desire Kwiek 20.04.2010 |
Originally Posted by DJBAKER
Also... Some people have been asking for the ETA of the 4 deck version. As I have mentioned earlier I'm in deep s#it with my university studies, my term ends on the 14th of May. I would say that the first stable version of the TSI would be out before the 20th Cheers mates! You've been very supportive and I really wanted to get this thing up earlier! |
| Rodger Mendis 19.04.2010 | I've been having a terrible time trying to get the pre-cueing to work through the headphones too. Essentially, I have my MacBook Pro connected to the Vestax SPIN, from the SPIN i have a set of speakers connected through the red and white RCA plugs on the SPIN and then the headphones I have connected through the built in pre-cue plug on the SPIN. My problem is I can get pre-cuing to work through the headphones but each side is not independent of each other, in other words I have to fade music to the left or the right in order to clearly hear the next song through one side of my headphones. I've spent alot of time on the internet trying to fix this but so far have found no solution on the world wide web or the manual that came with the software, any ideas..? |
| Stefani Misiti 16.04.2010 | Hey Oldfashioned, I have been futzing around on the spin and using traktor 1.2.4 My question is how do I go about seting up my system to do cues through my head phones in the spin and output the master through my laptop. A Second question I have is, is there anyway I can get that nifty little effect Ian Golden used in that video on tsi 1.4.3? i like it on 1.3 but I am more used to 1.4 and its functions. Thank you so much for this map it is so much fun to pull out at house parties here in college and impress people with my (extremely low and uneducated) mixing skills. haha thanks again, and I am practicing when I get the chance. -JMini |
| Keisha Snoberger 14.04.2010 | I've been reading the threads on this TSI and the other one sponsored by DJTT: http://www.djranking
s.com/community
/showthread.php?t=12672 and I've noticed there have been talks of the Spin freezing on people. I'm in real need of a MIDI controller and I'm seriously considering getting a Spin if I can learn more about this freezing issue. What exactly happens when it freezes, does Traktor freeze as well or is it just the controller? Can it be fixed easily, what are some ways to prevent it, etc.? Also, if any of you have tried out the other mapping, which one did you like more? This one or that one? Thanks everyone. |
| Carin Mcalevy 10.04.2010 | Hey guys i was just wondering if possible to perhaps have a diagram layout of the current mapping such as with flashflooder's mapping to fully visualize the full functionality of this mapping. please and thanks |
| Virgie Igler 28.03.2010 | hey just thought I'd let you all know I had my first couple of gigs this past weekend, and the Vestax Spin map for traktor worked flawlessly. Just thought you guys would like to know. regards, BMO |
| Tomasa Ralfs 25.03.2010 | I received a notice from Native Instruments today that they have Traktor Pro 1.2.5 available for download. Will your tsi work with this version? I've been using it with 1.2.3 (haven't tried it with 1.2.4). No problems using my Macbook with my Spin with 1.2.3 so I don't want to upgrade unless I know it works. |
| Desire Kwiek 24.03.2010 |
Originally Posted by stimo999
|
| Faviola Leible 24.03.2010 | Got the map working, great work!! Can anyone pls help with my audio setup? not sure how to set it up in preferences etc. Ive got my spin connected to my laptop via usb with a set of rca leads from the master out of the spin to the aux imput of my stereo. Im getting what sounds like bad backfeed through one speaker on the stereo and my headphones are not working properly. Thanks again for the map !! |
| Virgie Igler 22.03.2010 | cool man I can't wait! You better believe i'll be all over that .tsi file the second you post it haha. |
<< Back to Post and find Controller MappingsReply