Duplicating the DJTT S2 mapping to control 4 decks.

Home :: Post and find Controller Mappings :: Duplicating the DJTT S2 mapping to control 4 decks.Reply
Duplicating the DJTT S2 mapping to control 4 decks.
Posted on: 12.04.2012 by Daine Ziadeh
Since i'm a guy that wouldn't use all of these effects, i'm believeing, is there a way i can use the Shift+Reset modifier in this mapping to engage Deck C and the other Shift+Reset modifier to engage Deck D with all of it's functions?

It would be like the S4's Deck C button next to the jog wheel. Instead of the modifiers engaging all of this effects, it would simply swap to the corresponding deck according to which Shift+Reset button you pressed.

And also a way to control the key of a song..i'm the type of guy that loves looping a bit, bringing it down to 1/16 and starting raising the key to add that rise effect.

thanks alot!
Kellie Myrum
28.08.2012		Loop In/Out added for all four decks. Shift+

S2.tsi

I didn't get you for track search, sorry. It's looking good in mapping. Can you find a way to describe it some more? Like when does it jump to beginning, on jog touch, release or turn?

I deleted this just to see if that might cause issue you have, but is shouldn't since this command wasn't even mapped to jogwheel.

Shift+Cue=Seek position / direct-0 (jumps back to track start)
Kellie Myrum
25.06.2012
Originally Posted by Ps2Maniaco
Great Work MAN!!!!!
Many thanks
Kellie Myrum
25.06.2012
Originally Posted by JulianVeloso
It works, but, you have to twist the knob lots of times (it's an infinite knob) to get the loop to move, also it appears to be inverted, and when the loop moves (in) the loop counter on traktor won't move, by this i mean if i set a 1 beat loop and move it (in) to 1/4 it will stay at 1 bar on the counter, so if i were to move the loop out, it would be a huge jump.
I believe that counter move only while out point of the loop is changing loop size and it's not the case with loop in.

-Sensitivity increased 50%>100%
-Inverted

S2_4deck.tsi
Kellie Myrum
31.05.2012		Added /loop in move/ but only for deck A for now. Try out this, if that's ok I'll add for the rest of decks by same settings.

Pan reset is still mapped. Do you want to replace it with something too? Maybe to set direct four beat loop instead?

S2 4deck DJTT community help 1.1..tsi
Kellie Myrum
30.05.2012
Originally Posted by JulianVeloso
Nope, i just noticed shift+loop size controls the pan, maybe we could that change to shift+loop move and use shift+loop size to control the ''In'' size of the loop, not only the out size. I know you can do this with the jogwheel function but it's not the same, you lose the sync
Good believeing Julian, I'll edit it tomorrow.
Daine Ziadeh
30.05.2012
Originally Posted by Stewe
Shift+loop move is ehco amount right?
Nope, i just noticed shift+loop size controls the pan, maybe we could that change to shift+loop move and use shift+loop size to control the ''In'' size of the loop, not only the out size. I know you can do this with the jogwheel function but it's not the same, you lose the sync
Kellie Myrum
30.05.2012
Originally Posted by JulianVeloso
Stewe, i'm back here with another request, can you add something like shift+right/left loop move to control Loop In size?
Shift+loop move is ehco amount right?
Kellie Myrum
28.08.2012		Loop In/Out added for all four decks. Shift+

S2.tsi

I didn't get you for track search, sorry. It's looking good in mapping. Can you find a way to describe it some more? Like when does it jump to beginning, on jog touch, release or turn?

I deleted this just to see if that might cause issue you have, but is shouldn't since this command wasn't even mapped to jogwheel.

Shift+Cue=Seek position / direct-0 (jumps back to track start)
Kellie Myrum
27.08.2012		Now i see that saving fine size isn't gonna be easy task because all modifiers are already burned in this mapping and I need two more. Thing is, this is all because In/Out buttons are sharing the same modifier as shift button (A-C= M1 and B-D= M2) and when you hold shift M1=1 and the moment you press In or Out modifier will change value to 2 or 3 depend of button and you don't want it to happen.

I'll see if there is work around with second generic device.
Daine Ziadeh
26.08.2012		Yeah, Shift+ to make it work as manual loop set buttons in order to keep the fine size movement please. Thanks!
Kellie Myrum
26.08.2012		Loop in and loop out buttons are shift modifiers already within mapping. You use them to control loop fine size with jogwheels, far as I remember it... So they currently do have a function mapped in. Should I delete it and map loop set In/Out as you requested or to map it loop In/Out as Shift+ on order to keep current function?
Daine Ziadeh
26.08.2012		Also there's some problem with the jogwheel search funtion, it's Shift+Jogwheel, its what you use to scroll faster on the track...problem is that it seems to return to the beginning of the track, or the last set cue point, idk how to explain it..You will probably find the solution.

Also, the loop In and Out buttons have no function, they normally work to set manual loops (Irregular sizes and such) Or to set a cue point on the fly (To return to it by pressing cue and not a hot cue) Could you add such functions to them?
Daine Ziadeh
26.08.2012		Stewe, i noticed something, the key adjust and pan functions ain't working, to remind you this are shift+loop move and shift+loop adjust. Can you fix them? Thanks!
Kellie Myrum
25.06.2012
Originally Posted by Ps2Maniaco
Great Work MAN!!!!!
Many thanks
Kellie Myrum
25.06.2012
Originally Posted by JulianVeloso
It works, but, you have to twist the knob lots of times (it's an infinite knob) to get the loop to move, also it appears to be inverted, and when the loop moves (in) the loop counter on traktor won't move, by this i mean if i set a 1 beat loop and move it (in) to 1/4 it will stay at 1 bar on the counter, so if i were to move the loop out, it would be a huge jump.
I believe that counter move only while out point of the loop is changing loop size and it's not the case with loop in.

-Sensitivity increased 50%>100%
-Inverted

S2_4deck.tsi
Daine Ziadeh
24.06.2012		It works, but, you have to twist the knob lots of times (it's an infinite knob) to get the loop to move, also it appears to be inverted, and when the loop moves (in) the loop counter on traktor won't move, by this i mean if i set a 1 beat loop and move it (in) to 1/4 it will stay at 1 bar on the counter, so if i were to move the loop out, it would be a huge jump.
Malvina Plecker
24.06.2012		Great Work MAN!!!!!
Kellie Myrum
31.05.2012		Added /loop in move/ but only for deck A for now. Try out this, if that's ok I'll add for the rest of decks by same settings.

Pan reset is still mapped. Do you want to replace it with something too? Maybe to set direct four beat loop instead?

S2 4deck DJTT community help 1.1..tsi
Kellie Myrum
30.05.2012
Originally Posted by JulianVeloso
Nope, i just noticed shift+loop size controls the pan, maybe we could that change to shift+loop move and use shift+loop size to control the ''In'' size of the loop, not only the out size. I know you can do this with the jogwheel function but it's not the same, you lose the sync
Good believeing Julian, I'll edit it tomorrow.
Daine Ziadeh
30.05.2012
Originally Posted by Stewe
Shift+loop move is ehco amount right?
Nope, i just noticed shift+loop size controls the pan, maybe we could that change to shift+loop move and use shift+loop size to control the ''In'' size of the loop, not only the out size. I know you can do this with the jogwheel function but it's not the same, you lose the sync
Kellie Myrum
30.05.2012
Originally Posted by JulianVeloso
Stewe, i'm back here with another request, can you add something like shift+right/left loop move to control Loop In size?
Shift+loop move is ehco amount right?
Daine Ziadeh
29.05.2012		Stewe, i'm back here with another request, can you add something like shift+right/left loop move to control Loop In size?
Kellie Myrum
07.05.2012		Great
Daine Ziadeh
05.05.2012		LEDS are working.
Daine Ziadeh
04.05.2012		Sorry man, havent checked ever since, once i get home i will report !
Kellie Myrum
04.05.2012		Hey man, any luck with LED's since last update?
Lawanna Rios
03.05.2012		These Mappings are on the mappings pages and are pretty much done without issues.

BeauBryte DJTT S2 Mapping 4 Track Decks
http://maps.djranking s.com/mappings/179

DDTT S2 Mapping 4 Track Decks
http://maps.djranking s.com/mappings/141
Lawanna Rios
02.05.2012		4 track decks with all four fx units enabled on S2 mapping is already available on the DJTT mapping page. Check it out. http://maps.djranking s.com/mappings/179
Kellie Myrum
02.05.2012		I'm not sure fixing this also. Hopefully this helps:

http://www.traktorbible.com/freaks/m...ew.aspx?id=417
Lawanna Rios
01.05.2012		Just wanted to post another mapping for 4 track decks using the DJTT S2 Mapping. This mapping ( http://maps.djranking s.com/mappings/141 ) is basically the exact DJTT mapping but with 4 Track decks, no sample decks. It is NI protocol not Midi and effects unit 3 has not been mapped just like the DJTT mapping. I am also working on a 4 track deck version of the popular BeauBryte mapping which uses all 4 effects units and lot of other additions ( http://maps.djranking s.com/mappings/53 ) which will be posted soon.
Daine Ziadeh
30.04.2012		Stewe, i found one last bug i don't know how to fix it myself. I have 2 FX units. FX unit #1 is set as single and effect unit #2 is set as group. the problem is the buttons on effect unit #1 won't light up(and they do light up on screen) But if i switch effect unit #2 to single they both light up and if i switch effect unit #1 to group and #2 to single they both light up aswell. the problem is when i have effect unit #1 as single and #2 as group.
Kellie Myrum
29.04.2012		Can't do it, you need S2 to map knob act like button. This one is on you man, modifier conditions for deck A commands are M6=0 / M1=1. Just add all settings like in video with this modifiers I gave you. That should work.
Daine Ziadeh
28.04.2012		Ive got a last suggestion, lets make use of the sample volume knob. Say if im pressing shift on deck a and i start turning this knob, it will activate armyofme's swoosh effect combo on a unused fx unit (3)
Daine Ziadeh
28.04.2012		Everything works. Perfect mapping. thanks a lot.
Kellie Myrum
27.04.2012		I guess you haven't enabled FX units 3 and 4? Echo out deck C comes with unit 3 in single mode and deck D with unit 4. I wanted to add freeze to decks C and D because u already got it for A and B, so it can be available at all four decks. This will be very last feature in this mapping

Last update: http://www.traktorbible.com/freaks/m...ew.aspx?id=417
Daine Ziadeh
28.04.2012		Pan working on all decks, Deck C shift+headphone cue not wokring, isn't really necessary.
Kellie Myrum
27.04.2012		Deck balance (shift+loop size)
Deck balance reset (shift+loop set)
Deck C echo freeze (shift+headphone Cue)

http://traktorbible.com/freaks/mappingview.aspx?id=417
Daine Ziadeh
27.04.2012		The one that is used by the delay is the knob that controls the key. The set loop/size knob has no shift function.
Kellie Myrum
27.04.2012
Originally Posted by JulianVeloso
Found a problem, when loop is active on Deck A and i active it on Deck B(and D) it will get unactive on deck A, also pressing loop active on deck D will unload Deck A's track and pressing loop active when on Deck B unloads Deck C's track.
My bad dude. When looking for a specific control I usually add /unload/ command and then select (in this case the loop set) to scroll the entire list and easily found control when the list is lengthy. I wiped unload so there should be no more crap to set loop.
Browsing knob unloading deck was the same issue so it should loop with no problems now.

http://www.traktorbible.com/freaks/m...ew.aspx?id=417

Pan would nice addition but /active loop/ encoder+shift already exist as unit 3 delay and echo out when press... Did you believe of /set loop/ knob instead?
Daine Ziadeh
26.04.2012		Found a problem, when loop is active on Deck A and i active it on Deck B(and D) it will get unactive on deck A, also pressing loop active on deck D will unload Deck A's track and pressing loop active when on Deck B unloads Deck C's track.

Browsing knob no longer unloads the track.

I'm believeing about another feature: Pan. Shift+loop active will control pan, pressing it returns it to regular position?

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy