Toggle Deck between Sample, Track, and Live Input
Toggle Deck between Sample, Track, and Live Input Posted on: 16.04.2013 by Towanda Roads Are you able to switch the decks on traktor between their different types? I want to toggle deck c and maybe also deck d to be remix controls but I mix with 3-4 decks normally so I still need to be able to access those decks while throwing in some samples when I want by toggling decks? Is this possible? | |
| Libbie Orion 21.04.2013 |
Originally Posted by Patch
Originally Posted by Patch
Therefor you can not have a TRACK deck inside a REMIX DECK however, what you can do is set your hotcue points anywhere in the tracks you want (they must be loaded into a track deck (a or b) at CUE POINT 1, set your LOOP IN at cuepoint 2, set your LOOP OUT now you can take that section and assigne JUST THAT to Slot 1 row 1 and trigger it as often as you want Now goto that same original track Check your LOOP OUT at cue 2 to a LOOP IN at cue two. Move ahead in the track to cue 3 and set your LOOP OUT there Ok now you have another LOOP IN and OUT area. Snag that, and move it to slot whatever, row whatever in the remix deck try it on the demo and youll get it but this most eaisest done using and F1 attached because with theclick of two buttons you can tell it Take THIS loop area.... move it to THIS ROW +SLOT |
| Brunilda Kora 18.04.2013 | That sounds awesome. So, in theory, in Traktor, in a four deck set-up, you could toggle Deck D between a Remix Deck and a Track Deck? 'Cos I've just bought a Zomo MC-1000 and there is a toggle switch between Decks B and D. So, potentially, I could hit that toggle switch twice and go: Deck B (always track deck) Hit toggle switch Deck D (track deck) Hit Toggle switch Back to Deck B Hit Toggle Switch Deck D (Remix Deck) I like the sound of that... zomo switch.jpg |
| Chrissy Kynard 17.04.2013 |
Originally Posted by Stewe
|
| Chrissy Kynard 17.04.2013 |
Originally Posted by Patch
For other things with more than 3 states, Im not certain that you can directly select which state to go to. If there is a method to do so, it would probably require complex modifiers in addition to the conditional modifiers already described. |
| Towanda Roads 16.04.2013 | Are you able to switch the decks on traktor between their different types? I want to toggle deck c and maybe also deck d to be remix controls but I mix with 3-4 decks normally so I still need to be able to access those decks while throwing in some samples when I want by toggling decks? Is this possible? |
| Brunilda Kora 21.04.2013 | I believe my toggle idea (track deck/remix deck) gets me where I need to be... |
| Libbie Orion 21.04.2013 |
Originally Posted by Patch
Originally Posted by Patch
Therefor you can not have a TRACK deck inside a REMIX DECK however, what you can do is set your hotcue points anywhere in the tracks you want (they must be loaded into a track deck (a or b) at CUE POINT 1, set your LOOP IN at cuepoint 2, set your LOOP OUT now you can take that section and assigne JUST THAT to Slot 1 row 1 and trigger it as often as you want Now goto that same original track Check your LOOP OUT at cue 2 to a LOOP IN at cue two. Move ahead in the track to cue 3 and set your LOOP OUT there Ok now you have another LOOP IN and OUT area. Snag that, and move it to slot whatever, row whatever in the remix deck try it on the demo and youll get it but this most eaisest done using and F1 attached because with theclick of two buttons you can tell it Take THIS loop area.... move it to THIS ROW +SLOT |
| Brunilda Kora 20.04.2013 | I'm quite sure that when I get Traktor I won't be getting an F1 - so only the top 4 slots of the remix decks will used. Good to know that whole tracks can be loaded into a single Remix Deck slot! Can you use cue points in the Remix Deck Slot? Could I potentially use slot 1 of Row 1 as a normal player deck? I'm believeing I might use slot 1 as a track deck, if possible... |
| Libbie Orion 19.04.2013 | i just set mine as remix decks, then i just drop an entire track into say Slot 1 column 1 and keep my samples in the other slots which trigger by my F1 or MF3D. |
| Kellie Myrum 19.04.2013 | Traktorbible it is |
| Brunilda Kora 18.04.2013 | Nice one Stewe. I'm actualy on the look out for a printed manual (see my wanted ad in Buy & Sell once it's been approved) before I get my hands on the demo. I'm a manual fiend. I have manuals for everything - and they all have Post-it page tabs all over them! |
| Kellie Myrum 18.04.2013 | You can dl a demo version from NI and play a bit. It'll allow you to do make some mappings and replicate my parameters I've posted for ya.. |
| Brunilda Kora 18.04.2013 | I'm just trying to get my head around Traktor mappings (without a copy of Traktor!) I can map well in Ableton, and I can write scripts in DJ Decks. But mapping in Traktor? We're not in Kansas anymore, Toto.... |
| Kellie Myrum 18.04.2013 | Deck B switch: Add In > Deck Common > Flavor Selector / button-direct-Track Deck Deck D switch: Toggling modifier Add in Modifier 1 Modifier conditions / M1=0 Type of controller-button Interaction mode-direct Set to value-1 Add in Modifier 1 Modifier conditions / M1=1 Type of controller-button Interaction mode-direct Set to value-0 Add In > Deck Common > Flavor Selector / button-direct-Track Deck [M1=0] Add In > Deck Common > Flavor Selector / button-direct-Remix Deck [M1=1] |
| Brunilda Kora 18.04.2013 | That sounds awesome. So, in theory, in Traktor, in a four deck set-up, you could toggle Deck D between a Remix Deck and a Track Deck? 'Cos I've just bought a Zomo MC-1000 and there is a toggle switch between Decks B and D. So, potentially, I could hit that toggle switch twice and go: Deck B (always track deck) Hit toggle switch Deck D (track deck) Hit Toggle switch Back to Deck B Hit Toggle Switch Deck D (Remix Deck) I like the sound of that... zomo switch.jpg |
| Chrissy Kynard 17.04.2013 |
Originally Posted by Stewe
|
| Kellie Myrum 17.04.2013 | Set a modifier in increment mode and add a duplicate of the last value in a row with direct=0. Modifier will loop values in certain range. |
| Chrissy Kynard 17.04.2013 |
Originally Posted by Patch
For other things with more than 3 states, Im not certain that you can directly select which state to go to. If there is a method to do so, it would probably require complex modifiers in addition to the conditional modifiers already described. |
| Brunilda Kora 17.04.2013 | Can you assign MORE than 2 items to such a toggle? Or can you only toggle between 2 states? |
| Chrissy Kynard 17.04.2013 | In addition, if you wish to toggle between just the Remix and Track decks, you can use the Modifier Conditions to make it so. Add in > Deck Common > Deck Flavor Selector > Button: Direct - Track Deck. Condition: Deck Flavor (Deck of Interest) > Remix Deck. On the same button, map: Add in > Deck Common > Deck Flavor Selector > Button: Direct - Remix Deck. Condition: Deck Flavor (Deck of Interest) > Track Deck. This enables the button to switch only between remix and track deck for the deck of interest. |
| Kellie Myrum 17.04.2013 | Click on deck header to switch manually. To map it for button: Add in > Deck Common > Deck Flavor Selector |
<< Back to Post and find Controller MappingsReply