Softstep by Keith Mcmillian

Home :: Reviews of DJ equipment :: Softstep by Keith McmillianReply
Softstep by Keith Mcmillian
Posted on: 09.03.2011 by Len Ladera
So, finally figured out what to buy, and bought it.

http://www.keithmcmillen.com/softstep/overview

Previously I had the horrendously implemented Behringer FCB1010.
I modded this out with UNO http://www.ossandust.be/ firmware...
and bought the Fcb Editor, worked well enough, clunky for sure.

Nuff said, that unit finally broke when i kicked the powerstrip during
an update. So i began looking for a new solution.

Let me say.... Wow, i absolutely love this Softstep pedal.

Finer details:
10 Multitouch pads with a 4 way x/y nav of which the up/down are assignable. Left/right changes bank.

Let me explain how this works...
Each pad can detect pressure, rotation, direction.
Each pad can send 6 simultaneous midi messages or OSC events.
Each pad can have a LED text string display values or parameter.
Each pad state can have an associated LED state, blinking, on/off

The basic triggers are:
Foot On/Off, Pressure On/Off, Pressure X, Pressure Y, Pressure Latch, X/Y latch, Wait Trigger, Long Hold Trigger, Fast Trigger, Double Tap Trigger.

Note each of these triggers can be assigned at the same time to the same
PAD!!!! with different midi output sources and messages. For instance you could multiplex a Foot on message and send to multiple midi interfaces.

Conditional outputs allow min/max range, toggle, or discreet value.

Limitation:
I HAVE BEEN UPDATED WITH INFO, multipad is an option.

Implementation:
I've tried many different paradigms so far, still kinda feeling out, what my feet seem most inclined to do.. Fundamentally i am working on a
"do no harm" setup that i can't mess anything up to bad with my obviously
less dextrous feet.

I created a Traktor FX section. 3 pads are set as X Pressure, and they are
mapped to Effect Amount. Here is an example command chain.

Foot On->Effect 1 On, Deck A
Foot move right/left->Effect 1 Amount increase/decrease
Foot Off->Effect 1 Off, Deck A

I created an autolooper, super simple hold foot down for length of loop to set.

Foot On->Set Cue->LoopIn
Foot Off->Loop Out

I also took and made two banks of Instant Gratification MidiFighter mapping.
Set all the pad's to Pressure on, and the Echo Delay to a toggle. Mashing
with feet.

I also created a cue section that when you do a long trigger hold it will delete
the cue.


If anyone has some interesting ideas for this device, i would love to chat
and see if we can make it work.

l0rdr0ck

P.S. Did i mention it is made of carbon fiber? LOL, super nice.
Suzanna Paddock
10.06.2011
Originally Posted by Nicky H
Just watched the Ableton video - that thing would make an awesome effects controller in traktor
exactly.
Giuseppe Noori
10.03.2011		hello,

This is Tom from KMI. I just wanted to reply to your post real quick.
First off, thanks for the shout out! We're glad you're digging your SoftStep and we're here to help you dig deeper...

Originally Posted by l0rdr0ck
You can ONLY hold one pad at a time. You cannot say for instance hold
down one button and then press another. If you do this when you remove
the first foot, only then will the second pad trigger.
Actually, you CAN use more than one pad at a time (if you wish).
In the SoftStep Settings window, there is a button for "Multiple Key Mode Enable." By default this is deactivated, but enabling this will allow you to use multiple keys simultaneously.


Originally Posted by l0rdr0ck
If anyone has some interesting ideas for this device, i would love to chat
and see if we can make it work.
If you're not already a member, I would recommend signing up for the KMI Forum. it's at community .keithmcmillen.com. There's a community of users there and our tech support team frequent the boards as well. We hope to see you there-

best-
-Tom@KMI
Len Ladera
09.03.2011		So, finally figured out what to buy, and bought it.

http://www.keithmcmillen.com/softstep/overview

Previously I had the horrendously implemented Behringer FCB1010.
I modded this out with UNO http://www.ossandust.be/ firmware...
and bought the Fcb Editor, worked well enough, clunky for sure.

Nuff said, that unit finally broke when i kicked the powerstrip during
an update. So i began looking for a new solution.

Let me say.... Wow, i absolutely love this Softstep pedal.

Finer details:
10 Multitouch pads with a 4 way x/y nav of which the up/down are assignable. Left/right changes bank.

Let me explain how this works...
Each pad can detect pressure, rotation, direction.
Each pad can send 6 simultaneous midi messages or OSC events.
Each pad can have a LED text string display values or parameter.
Each pad state can have an associated LED state, blinking, on/off

The basic triggers are:
Foot On/Off, Pressure On/Off, Pressure X, Pressure Y, Pressure Latch, X/Y latch, Wait Trigger, Long Hold Trigger, Fast Trigger, Double Tap Trigger.

Note each of these triggers can be assigned at the same time to the same
PAD!!!! with different midi output sources and messages. For instance you could multiplex a Foot on message and send to multiple midi interfaces.

Conditional outputs allow min/max range, toggle, or discreet value.

Limitation:
I HAVE BEEN UPDATED WITH INFO, multipad is an option.

Implementation:
I've tried many different paradigms so far, still kinda feeling out, what my feet seem most inclined to do.. Fundamentally i am working on a
"do no harm" setup that i can't mess anything up to bad with my obviously
less dextrous feet.

I created a Traktor FX section. 3 pads are set as X Pressure, and they are
mapped to Effect Amount. Here is an example command chain.

Foot On->Effect 1 On, Deck A
Foot move right/left->Effect 1 Amount increase/decrease
Foot Off->Effect 1 Off, Deck A

I created an autolooper, super simple hold foot down for length of loop to set.

Foot On->Set Cue->LoopIn
Foot Off->Loop Out

I also took and made two banks of Instant Gratification MidiFighter mapping.
Set all the pad's to Pressure on, and the Echo Delay to a toggle. Mashing
with feet.

I also created a cue section that when you do a long trigger hold it will delete
the cue.


If anyone has some interesting ideas for this device, i would love to chat
and see if we can make it work.

l0rdr0ck

P.S. Did i mention it is made of carbon fiber? LOL, super nice.
Tatum Ansaldo
14.06.2011		awesome!
Roy Elwick
13.06.2011		Hey,
I'm officially in charge of mappings/scenes @ KMI and am going to be creating a Traktor map very soon. Would anyone like to share some useful ideas? What would you like the SoftStep to do with traktor?


Hit me up,
[email protected]

~Matt Hettich
www.meatmountain.info
Suzanna Paddock
10.06.2011
Originally Posted by Nicky H
Just watched the Ableton video - that thing would make an awesome effects controller in traktor
exactly.
Janyce Henningson
09.06.2011		Just watched the Ableton video - that thing would make an awesome effects controller in traktor
Suzanna Paddock
09.06.2011		Wanted to get one today. This was going to be my summer project.

Moog Audio is out can't wait for restock. This thing sounds like the sh*t.

Who wants to share their traktor mappings?
Tatum Ansaldo
11.03.2011		Awesome piece of kit, great price!
Len Ladera
10.03.2011		Wicked, thanks I am lame

Just tried it, i am soooo stoked. This is now my
FAVORITE piece of kit, absolutely. Thank You KMI.

l0rdr0ck
Giuseppe Noori
10.03.2011		hello,

This is Tom from KMI. I just wanted to reply to your post real quick.
First off, thanks for the shout out! We're glad you're digging your SoftStep and we're here to help you dig deeper...

Originally Posted by l0rdr0ck
You can ONLY hold one pad at a time. You cannot say for instance hold
down one button and then press another. If you do this when you remove
the first foot, only then will the second pad trigger.
Actually, you CAN use more than one pad at a time (if you wish).
In the SoftStep Settings window, there is a button for "Multiple Key Mode Enable." By default this is deactivated, but enabling this will allow you to use multiple keys simultaneously.


Originally Posted by l0rdr0ck
If anyone has some interesting ideas for this device, i would love to chat
and see if we can make it work.
If you're not already a member, I would recommend signing up for the KMI Forum. it's at community .keithmcmillen.com. There's a community of users there and our tech support team frequent the boards as well. We hope to see you there-

best-
-Tom@KMI
Len Ladera
09.03.2011		RETRACTION " Yes, i must be very clear, 1 button at a time."
ALERT, KMI in this community updated my ignorance, in the settings
multipad is not on by default, one click, and WOOT!

....
Each button can have 6 assignments. on any interface and any channel.
The more advanced functions require a server applet, Applications can utilize,
the Midi Bus (Softstep Share) on OSX. You can also use Apples IAC for this.
But within each button assignment you can direct the output to any midi device.

For example:

Pad 1:
Foot On CC 15 Value=63, Channel 3, Softstep Share
Pressure X Note C-1, velocity , Channel 4, M-Audio Venom Midi In
Pressure Y Note C#-1, velocity, Channel 4, M-Audio Venom Midi In
Rotation CC 16, Value on rotate, Channel 5, IAC Bus (IAC In ->Ableton)
X latch On hitting velocity 90, Note D-1, Channel 1, hold, Softstep Share
Y Latch On hitting velocity 90, Note D#-1, Channel 15, hold, IAC Bus (IAC In-> Ableton)
Foot Off CC 15 ,Value 0, Channel 16, Traktor Virtual Input

With the Midi implementation in Traktor, i haven't
decided if i want to offload toggles to the Softstep,
further its debatable whether to use double taps and long
holds as modifiers or to utilize a different bank, at this
point i use different banks.

You can attach any expression pedal to the Softstep
externally, don't know if it will be simultaneous.

l0rdr0ck
Pansy Shiveley
09.03.2011		The multi touch implementation is pretty friggin badass, but am I getting it right that you can only press 1 button at a time?

<< Back to Reviews of DJ equipment Reply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy