Need help not got a clue
Need help not got a clue Posted on: 30.08.2012 by Alethia Marmet i have 2 x cdj 850 and 1x pioneer dkm 600 , i want to start useing traktor with my dj gear , i know its a 2 in 2 out i need to make my mixer work is that right ? also what is the best soundcard to buy and also will the bass mid treble work with my mixer when useing traktor 2.5 not sure ware the phones go from my mixer to the soundacr and to my laptop | |
Alethia Marmet 31.08.2012 | Untitled.jpg |
Laurence Calisto 31.08.2012 |
Originally Posted by djbryanb
|
Laurence Calisto 31.08.2012 |
Originally Posted by MYE
|
Bunny Sockel 31.08.2012 |
Originally Posted by djbryanb
|
Laurence Calisto 30.08.2012 |
Originally Posted by jamthrax
|
Alethia Marmet 30.08.2012 | i have 2 x cdj 850 and 1x pioneer dkm 600 , i want to start useing traktor with my dj gear , i know its a 2 in 2 out i need to make my mixer work is that right ? also what is the best soundcard to buy and also will the bass mid treble work with my mixer when useing traktor 2.5 not sure ware the phones go from my mixer to the soundacr and to my laptop |
Alethia Marmet 31.08.2012 | ok thanks will have a mess around and hopefully get it thanks for your time |
Laurence Calisto 31.08.2012 | Looks like you don't have the Pioneer CDJ850 drivers installed and configured. I don't know the specifics of that (hopefully someone else can enlighten you) but Pioneer's drivers apparently aggregate them all into one audio device. You're going to need that to get the sound to work, since you can only specify one audio device at a time in Traktor. |
Alethia Marmet 31.08.2012 | Untitled.jpg |
Laurence Calisto 31.08.2012 |
Originally Posted by djbryanb
|
Alethia Marmet 31.08.2012 | i have pluged in a usb cable for each cdj and then in to my lap top i have downloaded the drivers and the tsi file for my cdj 850 both installed , i go into traktor and pick the file to load the tsi , when it loads in can use my cdjs on traktor for picking songs scratching rewind , pause cue start , loop , but the mixer has not lit up and will not let me use any of the functions on my mixer , i also done what you said about the phonos in to the back of the cdjs to the channels i am useing on the back of my mixer still the mixer wont work |
Laurence Calisto 31.08.2012 | really not sure what you're asking. do you want the knobs on your mixer to control the stuff on screen? I read up on the CDJ aggregator for windows (sorry, I assumed it was the same over there) and it says the drivers have that functionality built in, but you have to install the Pioneer CDJ drivers first. your DJM has RCA ins on the back. The CDJs have RCA outs on the back. You plug those into each other (CDJs to Line inputs.) Plug the USB from both CDJs into the computer. In traktor, configure deck A to output on channels 1 and 2 of CDJ 1 (this is where I'm sketchy, you'll have to select the CDJs as your sound device, and beyond that I'm not sure what the output routing screen will look like. I'm on a mac, first, and haven't used the sound cards in my CDJs for HID mode. The effective net result is that the CDJs should control decks A and B on traktor, and audio should be output through the CDJ's normal RCA outs into your mixer. From that point on there's no effective difference between using the CDJs as players or using them as controllers. Mix as you normally would. Is there something I'm missing here...? |
Alethia Marmet 31.08.2012 | can you draw me how it should look as i cant understand how this would work this way , i know my cdjs have a built in soundcard when i use traktor it works with them just not the mixer |
Alethia Marmet 31.08.2012 | CDJ aggregator it says for mac i dont use mac , |
Laurence Calisto 31.08.2012 |
Originally Posted by MYE
|
Bunny Sockel 31.08.2012 |
Originally Posted by djbryanb
|
Alethia Marmet 31.08.2012 | but if i have a djm 600 mixer that is analog and not digital how will my mixer work to mix the songs on traktor ? |
Laurence Calisto 30.08.2012 |
Originally Posted by jamthrax
|
Sammie Okeeffe 31.08.2012 | just to recap.. you dont need to buy a sound card. Just take the audio from each CDJ out and plug into you mixer. All explained in the pdf http://pioneer.jp/support/download/d...TRAKTOR_En.pdf |
Alethia Marmet 30.08.2012 | thanks m8 believe i understand now |
Laurence Calisto 30.08.2012 | if you're trying to hook up 2 CDJs over something like traktor scratch and then back into your mixer you're gonna need a 4-in 4-out - while you're working with 2 decks, each deck uses 2 channels (left and right.) if you're using the 2 CDJs in HID mode (sounds like you are) then you're only going to need 4 outs, though you'll probably find them paired with 4 ins on any DJ-oriented sound card. send the sound out over that interface, with each deck's out assigned to a pair of channels (deck A on 1 and 2, deck B on 3 and 4) and plug the RCA outs from your interface into your mixer where you would have plugged in the CDJs. Also, you can set Traktor's mixer mode to external so you don't accidentally close a channel on your computer with the keyboard and wonder what the hell's going on. Then you should be able to use the CDJs to control Traktor while controlling levels, eq, etc. on your normal mixer. |
Alethia Marmet 30.08.2012 | hi there , i allready have this installed MIDI Mapping File Ver1.00 or later TSI file CDJ-850 Firmware Ver1.06 andwhen i load the tsi i can use my cdjs on traktor to scratch cur play pick a song loop pause and search , what i cant do i use my dkm600 mixer to mix with , do i need a 2 in 2 out soundcard |
Sammie Okeeffe 30.08.2012 | I use turntables so not really had experience setting this up. I am pretty sure that you can just plug your CDJ in to your computer via USB and just the HID mode. This means you will not need to buy a sound card as it uses the CDJ's inboard ones. http://pioneer.jp/support/connect/dj-e/cdj-850/ |
<< Back to Oldschool - vinyl and disc Djs topicReply