Traktor Pro 2.5.1 available now!

Home :: General Discussion :: Traktor Pro 2.5.1 available now!Reply
Traktor Pro 2.5.1 available now!
Posted on: 23.07.2012 by Makkins Clifton
Check your Service Center for updates and grab it while it's hot.
Twyla Tylinski
27.07.2012
Originally Posted by djchriswoods.co.uk
has anyone tried it with timecode control yet?
Yes, I've updated and use Timecode and the needle drop problem persists. It's frustrating as I like to cue up my tracks by placing the needle at the beginning of the timecode vinyl but this does not work for me. I also cannot get absolute mode to work as it is blanked out and does not allow me to press it. Anyone got any solutions? (and please don't say wait for 2.5.2).
Christiane Calamaco
26.07.2012
Originally Posted by scamo
What you just posted makes no sense. You can install Traktor on two computers, but you have to uninstall it on one computer to get it to work on another?

scamo
http://www.native-instruments.com/kn...nd+Computer%3F

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sorry for my probably terrible misinterpretation, but this is where I was trying to convey my message from...
Rey Holubar
26.07.2012
Originally Posted by Luke Ryan
On the Native Instruments website under their FAQ section for activation/registration, it says that you can have the same Traktor license installed on two different computers but you cannot use them at the same time. It says you do not have to "deactivate" Traktor from your computer, but you have to uninstall it on one of the two computers in order to be able to install it again on another (third) computer. Don't know if this helps, but thought it might...
Corrected.

scamo
Christiane Calamaco
25.07.2012
Originally Posted by jayo
The update is available on my other computer, weird.
A difference i notice, when i click overview, traktor scratch pro 2, and look at the drop down menu.
My main computer (Running 2.1.2) and has the update, under the version section it lists the version and has a location.
On my secondary computer (running 2.5) and no update available, under the version is says in red "! no stand-alone application found"
Both computers are 2009 MB
Any info on this would be much appreciated as I'd like to keep testing 2.5.x until it seems stable enough on my second computer.
On the Native Instruments website under their FAQ section for activation/registration, it says that you can have the same Traktor license installed on two different computers but you cannot use them at the same time. It says you do not have to "deactivate" Traktor from your computer, but you have to uninstall it in order to be able to use it on your other comp. Don't know if this helps, but thought it might...
Anja Ursprung
25.07.2012
Originally Posted by Saurus
Woahhhhh! If I'm understandign this right, this sounds huge.
Has anyone tried this stuff out?
I assume there's a firmware update for the 900 and 2000 that goes with this?
Does traktor actually send brand new, deck-specific visual feedback to the screen on the 2000/900?
Does it send a waveform? what about loop, cue point and grid info?
Does it send browser fields, and auto-map to navigate and load?

Is there any way someone loves us enough to do a demo video of this stuff?

I've been waiting for this stuff this since I first saw the screen of the 2000. This could mean performing with a closed laptop.
The firmware does not need to be updated for this to work. I have FW4.05 on pioneer CDJ 2000. And it works really good. No need for record box anymore :-)

The jog feel is finally great. Im not a scratch dj, but I don't feel any different from play with CDs.

I do have some problem with connecting. I start Traktor with two CDJ2000 connected and on. After Traktor is loaded I have to restart the CDJ 2000 to connect well.
Eden Effland
26.07.2012
Originally Posted by ParisCreative
2.5.1 fixed my CPU issue.
Same here, on both my PCs.
Latina Samon
27.07.2012		Any point updating if everythings fine as it is? Is there anything better about it for an S2 user?
Noriko Lebowitz
27.07.2012		was getting a lot of glitching toevening with a Mixtrack pro + F1. Cheap setup but it shouldn't have been happening...
Ira Alsadi
27.07.2012		Time code is no different. Still have needle position jump all over the place on rewind. CPU usage has gone up once again also. Now when running Traktor my CPU meter is maxed out.
Germaine Bernadin
27.07.2012		I was running Traktor Pro 2.0.3 for ages.

Now I'm running Trakor Scratch Version 2.5.0.... I upgraded via a gift form one of the labels I work for, its way more stable.

Multicore support works now and doesn't wanna make the thing take off!
Twyla Tylinski
27.07.2012
Originally Posted by djchriswoods.co.uk
has anyone tried it with timecode control yet?
Yes, I've updated and use Timecode and the needle drop problem persists. It's frustrating as I like to cue up my tracks by placing the needle at the beginning of the timecode vinyl but this does not work for me. I also cannot get absolute mode to work as it is blanked out and does not allow me to press it. Anyone got any solutions? (and please don't say wait for 2.5.2).
Ninfa Mazariegos
26.07.2012		Seek position (deck common) no longer functions like it did in the past. Either it's a bug, they changed a command name, a setting defaulted, or they changed the function. Normaly, instead of seeking forward by beat count, this seek function searches by a percentage of the length of the track. Now, when I hit the seek position (fine) button it skips to about the middle of the track, then when hit again, it works as should.
Christiane Calamaco
26.07.2012
Originally Posted by scamo
What you just posted makes no sense. You can install Traktor on two computers, but you have to uninstall it on one computer to get it to work on another?

scamo
http://www.native-instruments.com/kn...nd+Computer%3F

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Sorry for my probably terrible misinterpretation, but this is where I was trying to convey my message from...
Teresia Janusch
26.07.2012		has anyone tried it with timecode control yet?
Rey Holubar
26.07.2012
Originally Posted by Luke Ryan
On the Native Instruments website under their FAQ section for activation/registration, it says that you can have the same Traktor license installed on two different computers but you cannot use them at the same time. It says you do not have to "deactivate" Traktor from your computer, but you have to uninstall it on one of the two computers in order to be able to install it again on another (third) computer. Don't know if this helps, but thought it might...
Corrected.

scamo
Danae Dumler
26.07.2012		You can leave it installed on two computers without them sending Karlos to your house. It's only on a third computer that will you get into trouble. So if you just got a shiny new macbook and you're going to throw your old believepad out the window, you need to uninstall Traktor first.
Rey Holubar
25.07.2012		What you just posted makes no sense. You can install Traktor on two computers, but you have to uninstall it on one computer to get it to work on another?

scamo
Christiane Calamaco
25.07.2012
Originally Posted by jayo
The update is available on my other computer, weird.
A difference i notice, when i click overview, traktor scratch pro 2, and look at the drop down menu.
My main computer (Running 2.1.2) and has the update, under the version section it lists the version and has a location.
On my secondary computer (running 2.5) and no update available, under the version is says in red "! no stand-alone application found"
Both computers are 2009 MB
Any info on this would be much appreciated as I'd like to keep testing 2.5.x until it seems stable enough on my second computer.
On the Native Instruments website under their FAQ section for activation/registration, it says that you can have the same Traktor license installed on two different computers but you cannot use them at the same time. It says you do not have to "deactivate" Traktor from your computer, but you have to uninstall it in order to be able to use it on your other comp. Don't know if this helps, but thought it might...
Anja Ursprung
25.07.2012
Originally Posted by Saurus
Woahhhhh! If I'm understandign this right, this sounds huge.
Has anyone tried this stuff out?
I assume there's a firmware update for the 900 and 2000 that goes with this?
Does traktor actually send brand new, deck-specific visual feedback to the screen on the 2000/900?
Does it send a waveform? what about loop, cue point and grid info?
Does it send browser fields, and auto-map to navigate and load?

Is there any way someone loves us enough to do a demo video of this stuff?

I've been waiting for this stuff this since I first saw the screen of the 2000. This could mean performing with a closed laptop.
The firmware does not need to be updated for this to work. I have FW4.05 on pioneer CDJ 2000. And it works really good. No need for record box anymore :-)

The jog feel is finally great. Im not a scratch dj, but I don't feel any different from play with CDs.

I do have some problem with connecting. I start Traktor with two CDJ2000 connected and on. After Traktor is loaded I have to restart the CDJ 2000 to connect well.
Eden Effland
26.07.2012
Originally Posted by ParisCreative
2.5.1 fixed my CPU issue.
Same here, on both my PCs.
Christiane Calamaco
25.07.2012
Originally Posted by Saurus
Woahhhhh! If I'm understandign this right, this sounds huge.
Has anyone tried this stuff out?
I assume there's a firmware update for the 900 and 2000 that goes with this?
Does traktor actually send brand new, deck-specific visual feedback to the screen on the 2000/900?
Does it send a waveform? what about loop, cue point and grid info?
Does it send browser fields, and auto-map to navigate and load?

Is there any way someone loves us enough to do a demo video of this stuff?

I've been waiting for this stuff this since I first saw the screen of the 2000. This could mean performing with a closed laptop.
Check this out my man!!

http://community s.pioneerdj.com/entries/...-for-rekordbox
Marva Aird
25.07.2012
Originally Posted by Percy
Ok i have a problem. I am a Macbookpro user. When i updated everything went well. When i shut the program down intentionally it said it had unexpectadly quit and when i opened it again all my playlists que points ect had gone. I did everything that it said was advised when installing so is there a way to get my playlists back. It all seemed to be there & working before it quit.
The same thing just happened to me. Save your playlists guys before you switch to 2.5.1.
Georgianna Eurick
25.07.2012		And the icon is not showing. Do anybod had the same issue?
Jamila Citino
25.07.2012		2.5.1 fixed my CPU issue.
Eloy Kiepke
25.07.2012		Or, does anyone speak Portuguese (I believe) well enough to watch this and answer those questions?
It seems like most of the are a yes... Which is awesome. Although why it can't have traktor-style colored stereo waveforms is beyond me...


Lisa Lochotzki
24.07.2012
Originally Posted by ThinkAboutIt
Alt F4 is not working anymore!!
don't work in 2.5 either... so

Browser search is still as fast as a turtle on Valium for decent sized collection (or at least says >40K) ....that sucks...

CPU meter still goes like crazy on some machine, while not on other. Weird... don't feel safe at all....
Noriko Lebowitz
24.07.2012		Cannot proceed with this update, because the application cannot be found in the stored installation directory.

If you have manually renamed or moved the application, move it back to its original location, then start this update installer again. Alternatively, use the original full installer to reinstall before using this update installer.

any help?
Noriko Lebowitz
24.07.2012		Not seeing an update. Logged in.

*EDIT* Never mind, got it.
Eloy Kiepke
24.07.2012
KEY FEATURES:

Pioneer CDJ Advanced HID display integration
Browser (CDJ 900 / 2000)
Cover Art (CDJ 2000)
Stripe (CDJ 2000)
Cue Points (CDJ 900 / 2000)

....

Implemented CDJ Mode
Woahhhhh! If I'm understandign this right, this sounds huge.
Has anyone tried this stuff out?
I assume there's a firmware update for the 900 and 2000 that goes with this?
Does traktor actually send brand new, deck-specific visual feedback to the screen on the 2000/900?
Does it send a waveform? what about loop, cue point and grid info?
Does it send browser fields, and auto-map to navigate and load?

Is there any way someone loves us enough to do a demo video of this stuff?

I've been waiting for this stuff this since I first saw the screen of the 2000. This could mean performing with a closed laptop.
Evie Baghdasarian
24.07.2012		The update is available on my other computer, weird.
A difference i notice, when i click overview, traktor scratch pro 2, and look at the drop down menu.
My main computer (Running 2.1.2) and has the update, under the version section it lists the version and has a location.
On my secondary computer (running 2.5) and no update available, under the version is says in red "! no stand-alone application found"
Both computers are 2009 MB
Any info on this would be much appreciated as I'd like to keep testing 2.5.x until it seems stable enough on my second computer.
Evie Baghdasarian
24.07.2012		I have logged into the service centre and don't see any updates available. It also tells me my software is up to date.
I recently installed my second license on this computer, I use another computer for gigs and haven't upgraded to 2.5 yet on that machine until everything is worked out, in case that makes any difference.
Delila Vandommelen
24.07.2012
Originally Posted by scamo

  • FLAC year tag is now preserved when importing files to collection
Ooh, being quite the tagging nazi and on flacs this might lure me into the 2.5+ branch...
Georgianna Eurick
24.07.2012		Alt F4 is not working anymore!!
Rosina Steinkuehler
24.07.2012		Some talk of HID/CDJ integration over in this thread http://community .djranking s.com/showthread.php?t=54995
Elba Wride
24.07.2012		So I installed and immediately opened it up on my clubs CDJ2000s as I was anxious to see the new HID updates. The version worked fine for the 30 minutes I spent playing tracks and testing out functions but The CDJs only populated half of the wave, the rest was blank. Also the browsing on the CDJ screen was useless because it would not match what was currently highlighted in Traktor. The Traktor Highlighted track would load not the CDJ screen track, which would be different at times. This makes the CDJ browser useless. The A,B,C, Hot Cues on the CDJs would be populated by cues 2,3,4 in Traktor respectively. Which seems to work with my workflow. I use cue 1 as the intro loop. Everything seemed stable besides these obvious bugs. Unfortunately I didn't reboot and try everything again. Hopefully tomorrow when I play the bugs are gone but at least the version is stable. What's nice is you now get a tenths reading on your BPM, if you use it, and it is switchable between 6,10,Wide Etc. Also you can change the time to see track playing time or remaining time. That's all I saw so far. Why did it take so long for them to do this? Any one else have experience using it with CDJs yet?
Rosina Steinkuehler
24.07.2012		Your traktor crashed while saving the collection. Unfortunately when this happens the file is corrupted.

Grab the collection.nml file and copy it back to the new tratkor folder from the previous.
Erich Fearday
24.07.2012		No i clicked yes and they were there to start with but when i shut the program down there was a mesage that said traktor quit unexpectadly and when i re opened it they were gone?
Mikki Retana
24.07.2012
Originally Posted by Percy
Ok i have a problem. I am a Macbookpro user. When i updated everything went well. When i shut the program down intentionally it said it had unexpectadly quit and when i opened it again all my playlists que points ect had gone. I did everything that it said was advised when installing so is there a way to get my playlists back. It all seemed to be there & working before it quit.
Traktor asks you if you wish to import your old libraries/playlists into the new 2.5.1 upon first starting the program. Did you accidentally click no?
Erich Fearday
24.07.2012		Ok i have a problem. I am a Macbookpro user. When i updated everything went well. When i shut the program down intentionally it said it had unexpectadly quit and when i opened it again all my playlists que points ect had gone. I did everything that it said was advised when installing so is there a way to get my playlists back. It all seemed to be there & working before it quit.
Celine Surico
24.07.2012		I did a stress test of 2.5.1 with my studio MacPro setup toevening . The lock key glitches are gone and after 30 minutes of doing analysis of files + playing two tracks + effects + anything else I could believe of to load the CPU like crazy == works fine! Good.

<< Back to General DiscussionReply
  • Page:
  • 1
  • 2
  • >>
  • Total: 59

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy