VCI-100 Doesn't turn on after updating firmware.
VCI-100 Doesn't turn on after updating firmware. Posted on: 08.05.2009 by Annabel Khim I followed the procedure in the firmware update tutorial, and it seemed to have worked. I got a success message at the end of the Flash Dev Tool kit process. But now my VCI won't turn on. At first it did turn on, but the jog wheels lit up red instead of blue, and nothing worked in Traktor (using NI's latest midi mapping, which worked before the firmware upgrade). But then I disconnected the VCI and restarted my computer and now nothing turns on at all. Please help!Thanks, Rob | |
| nelson herzon 20.10.2009 |
Originally Posted by EanGolden
|
| nelson herzon 20.10.2009 |
Originally Posted by Sammyz
|
| Annabel Khim 08.05.2009 | I followed the procedure in the firmware update tutorial, and it seemed to have worked. I got a success message at the end of the Flash Dev Tool kit process. But now my VCI won't turn on. At first it did turn on, but the jog wheels lit up red instead of blue, and nothing worked in Traktor (using NI's latest midi mapping, which worked before the firmware upgrade). But then I disconnected the VCI and restarted my computer and now nothing turns on at all. Please help! Thanks, Rob |
| Adolf Hit 20.10.2009 | I will repeat my answer in this thread for other who come across this post with the same problem. If you look through the log text he has posted you can see this "Processing file :"C:\Program Files\vci-100se_13_firmware.zip" This means you are trying to program it with the zip file, you must extract the firmware from the zip before you can use it. ez mistake Cheers, Mike |
| nelson herzon 20.10.2009 | this is what i get Flash Development Toolkit and flash programming components are provided without support OS: Windows XP [Admin] FDT API initialised: version 4, 02, 00, 008 Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A Connecting to device 'H8/3052F' on 'COM1' Configuration: 'BOOT Mode' connection - using emulated interface Opening port 'COM1' ... Loading Comms DLL Loaded Comms DLL Initiating BOOT SCI sequence Attempting 9600 Received immediate response from device: 0xAA Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde' Downloading and verifying micro kernel... Device is erasing... Erase Timeout value set to 21 seconds Erase Successful micro-Kernel download successful Sending inquiry for getting line size Buffer size has been set to default (128 bytes) Sending selection of device command Selection of Device - Device selected, code 0302 Sending selection of clock mode Sending selection of clock mode Selection of Clock Mode - Clock selected, code 0 Changing baud rate to 38400 bps Set baud rate value = 38400 Downloading main kernel 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde' Main kernel download complete... Connection complete Processing file :"C:\Program Files\vci-100se_13_firmware.zip" Processing file :"C:\Program Files\vci-100se_13_firmware.zip" Operation on User Flash Downloaded the operation module Writing image to device... [0x00000000 - 0x00005FFF] Data programmed at the following positions: 0x00000000 - 0x00005FFF Length : 0x00006000 24 K programmed in 11 seconds Image successfully written to device Where it says processing file:"C\Program Files etc" I get the two messages that says "this is not a SRecord file loading raw data" What does this mean |
| Granville Cerullo 20.10.2009 | verify if everything inside is well connected. It can be as trivial as that. |
| nelson herzon 20.10.2009 |
Originally Posted by EanGolden
|
| nelson herzon 20.10.2009 |
Originally Posted by Sammyz
|
| Darrel Prox 27.05.2009 | I still can't turn my vci 100 on ,after the upgrade, it never turned back on, I have the exact same problem only my red jogwheel lights come on ,but thats only when I hold the top loop button on,one of djtt techs is trying to help me ,he says my vci is still in upgrade mode, which makes sense because I followed every step correctly and I made sure I hit disconnect turned vci off,removed the firmware plate and plugged back the harness ,Did you ever got your vci out of upgrade mode ?,please let me know ?,thanks,I really want to have the awesome 2.2 tks file. thanks. |
| 10.05.2009 | sounds like you didn't put everything back together properly like Jesc pointed out. Let us know if your problem is solved. |
| Cristian Carmona 08.05.2009 | here is what you have to check. re-open the vci and make sure that the the cable next to where you put the firmware kit is hooked up. that is the most common issue after the upgrade. |
| Lakeshia Cipres 08.05.2009 | Hey sorry to hear you're having problems. I would suggest opening the board back up and checking to make sure you properly reconnected everything and that you didn't bump or damage any of the other connections during your process. I didn't have this problem you're describing, but after I closed my board back up I realized that I hadn't reconnected everything. I hadn't tried to turn the board on at this point so I don't know if it would have caused the issues you are describing but its worth a shot. Good luck. |
<< Back to DJ TechTools' VCI-100 FAQReply