Can anybody help me please
Can anybody help me please Posted on: 20.10.2009 by nelson herzon My unit will not power up after I installed the 1.3 firmware. Hooked everything back up properly and nothing. During flash I get "this file is not SRecord loading Raw data" It says successful at the end but nothing. I need help fast. Can anyone help me out. I see that someone else had this problem but there is no more comments about if they solved it.This is what I get when I flash:Flash Development Toolkit and flash programming components are provided without support OS: Windows XP [Admin] FDT API initialised: version 4, 02, 00, 008 Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A Connecting to device 'H8/3052F' on 'COM1' Configuration: 'BOOT Mode' connection - using emulated interface Opening port 'COM1' ... Loading Comms DLL Loaded Comms DLL Initiating BOOT SCI sequence Attempting 9600 Received immediate response from device: 0xAA Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde' Downloading and verifying micro kernel... Device is erasing... Erase Timeout value set to 21 seconds Erase Successful micro-Kernel download successful Sending inquiry for getting line size Buffer size has been set to default (128 bytes) Sending selection of device command Selection of Device - Device selected, code 0302 Sending selection of clock mode Sending selection of clock mode Selection of Clock Mode - Clock selected, code 0 Changing baud rate to 38400 bps Set baud rate value = 38400 Downloading main kernel 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde' Main kernel download complete... Connection complete Processing file :"C:\Program Files\vci-100se_13_firmware.zip" (This is where Processing file :"C:\Program Files\vci-100se_13_firmware.zip" (raw data show) Operation on User Flash Downloaded the operation module Writing image to device... [0x00000000 - 0x00005FFF] Data programmed at the following positions: 0x00000000 - 0x00005FFF Length : 0x00006000 24 K programmed in 11 seconds Image successfully written to device | |
| Johnathan Dung 21.10.2009 |
Originally Posted by sabastinematthews
|
| nelson herzon 20.10.2009 | My unit will not power up after I installed the 1.3 firmware. Hooked everything back up properly and nothing. During flash I get "this file is not SRecord loading Raw data" It says successful at the end but nothing. I need help fast. Can anyone help me out. I see that someone else had this problem but there is no more comments about if they solved it.This is what I get when I flash: Flash Development Toolkit and flash programming components are provided without support OS: Windows XP [Admin] FDT API initialised: version 4, 02, 00, 008 Clock Frequency (External) = 24.0000MHz, Clock Mode = 0, CKM = 1, and CKP = N/A Connecting to device 'H8/3052F' on 'COM1' Configuration: 'BOOT Mode' connection - using emulated interface Opening port 'COM1' ... Loading Comms DLL Loaded Comms DLL Initiating BOOT SCI sequence Attempting 9600 Received immediate response from device: 0xAA Using micro-Kernel : 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\uGen3052.cde' Downloading and verifying micro kernel... Device is erasing... Erase Timeout value set to 21 seconds Erase Successful micro-Kernel download successful Sending inquiry for getting line size Buffer size has been set to default (128 bytes) Sending selection of device command Selection of Device - Device selected, code 0302 Sending selection of clock mode Sending selection of clock mode Selection of Clock Mode - Clock selected, code 0 Changing baud rate to 38400 bps Set baud rate value = 38400 Downloading main kernel 'C:\Program Files\Renesas\FDT4.02\kernels\ProtB\3052\Renesas\1 _2_00\Genm3052.cde' Main kernel download complete... Connection complete Processing file :"C:\Program Files\vci-100se_13_firmware.zip" (This is where Processing file :"C:\Program Files\vci-100se_13_firmware.zip" (raw data show) Operation on User Flash Downloaded the operation module Writing image to device... [0x00000000 - 0x00005FFF] Data programmed at the following positions: 0x00000000 - 0x00005FFF Length : 0x00006000 24 K programmed in 11 seconds Image successfully written to device |
| Broderick Huzar 18.11.2009 | Well, as I mentioned in a previous post. |
| nelson herzon 21.10.2009 | I been looking.. is there anyway to put in a manual bpm for tracks. Traktor doubled the bpm of some tracks. |
| Johnathan Dung 21.10.2009 |
Originally Posted by sabastinematthews
|
| nelson herzon 21.10.2009 | Thanks ean. That worked but I have a question for you. I have a vci 100 silver edition. do the platter lights still lights up blue and when you touch them they turn red? Is this correct |
| 21.10.2009 | if you look at this line: Processing file :"C:\Program Files\vci-100se_13_firmware.zip" (This is where Processing file :"C:\Program Files\vci-100se_13_firmware.zip" (raw data show) you will see that you have loaded the zip file. You need to unzip that and load the .MOT file inside the zip. |
<< Back to DJ TechTools' VCI-100 FAQReply