vci 100 drop out problems
vci 100 drop out problems Posted on: 28.04.2010 by Adell Hurtgen For some reason when i plug and play my vci, it seems to be working, however, sometimes it seems to "drop out" or lose power and flashes 3-4 times before the lights turn back on before doing it again every minute or so. i updated traktor to 1.2.4 and in the preferences i have my vci selected in the "device" under controller manager section. any advice or suggestions? thanks!! | |
| Corine Kasman 03.05.2010 |
Originally Posted by amon2385
Basically, your problem sounds like there is not enough power getting to the VCI, you could try a power supply. Phil. |
| Corine Kasman 03.05.2010 |
Originally Posted by haze324
Phil. |
| Adell Hurtgen 28.04.2010 | For some reason when i plug and play my vci, it seems to be working, however, sometimes it seems to "drop out" or lose power and flashes 3-4 times before the lights turn back on before doing it again every minute or so. i updated traktor to 1.2.4 and in the preferences i have my vci selected in the "device" under controller manager section. any advice or suggestions? thanks!! |
| Corine Kasman 03.05.2010 |
Originally Posted by amon2385
Basically, your problem sounds like there is not enough power getting to the VCI, you could try a power supply. Phil. |
| Corine Kasman 03.05.2010 |
Originally Posted by haze324
Phil. |
| Adell Hurtgen 02.05.2010 | well i kinda figured what the problem is. when i turn on my vci-100 everything is ok.....until i plug in my kontrol x1. then it starts flashing. i believe its more of a midi problem and i dont know how to fix it. any ideas? |
| Julissa Serrone 02.05.2010 | ^^ hey what kinda glue can be used to re-attach that paper? |
| Madalene Ranjan 02.05.2010 | Try taking the back plate off of your VCI. There are five screws total holding it in. Two on each side and one on the bottom. Make sure that you have a piece of paper covering the bottom of the pcb inside. I have also seen this problem happen when people are missing that piece. |
| Adell Hurtgen 01.05.2010 | yeah i actually used a brand new gold plated usb chord that i bought here thru djtt and another that i got with my kontrol x1 and still nothing : ( |
| Madalene Ranjan 30.04.2010 | Have you tried using a different USB cable? Also have you tried it in other USB ports? |
<< Back to DJ TechTools' VCI-100 FAQReply