upgrading my VCI to 1.4 - not working anymore!
upgrading my VCI to 1.4 - not working anymore! Posted on: 13.10.2011 by Leia Dacuycuy Hi,i have a VCI100SE which i bought on the website, with firmware 1.3 I have the upgrade kit and used this USB to serial cable: http://www.moxa.com/product/uport_1110.htm After sorting out the problem with the port, i follow every step from Ean's video, til the software says the flash has succeed. But now i plug the VCI on my computer, it doesn't light on, doesn't respond, looks absolutely dead. It is really complicated cos i don't know which step i did wrong..... please help me | |
| Leia Dacuycuy 13.10.2011 | Hi, i have a VCI100SE which i bought on the website, with firmware 1.3 I have the upgrade kit and used this USB to serial cable: http://www.moxa.com/product/uport_1110.htm After sorting out the problem with the port, i follow every step from Ean's video, til the software says the flash has succeed. But now i plug the VCI on my computer, it doesn't light on, doesn't respond, looks absolutely dead. It is really complicated cos i don't know which step i did wrong..... please help me |
| Hipolito Scionti 17.10.2011 | yeah took me like 3 goes then it finally did it |
| Leia Dacuycuy 17.10.2011 | I've finally succeeded. I've started again, but with an older version of the software and it now works like a charm thanks for your answer bmwnutfrombirth |
| Wei Lebeaux 17.10.2011 | Don't panic; you didn't break your VCI permanently; you just need to flash it with an serial cable. The USB-serial connection is prone to failure; if you need me to, i'd be glad to flash the VCI for you, or the tech tools staff can do it. Either way, you might not be able to successfully flash it without a serial-serial cable. |
<< Back to DJ TechTools' VCI-100 FAQReply