norequestvci1.1

Home :: DJ TechTools' VCI-100 FAQ :: norequestvci1.1Reply
norequestvci1.1
Posted on: 22.12.2011 by Lashay Walchak
I picked up a VCI-100 w/ 1.3 firmware and started my own map from scratch. After mapping my Total Control and having loop roll/move I set out to achieve that on the VCI.

So far I have

Full 4 FX bank controls (tricky to get into, similar to route f/x from the djtt map)

Sample deck 3/4 volume, play, and loading controls (in effect parameter channels)

common EQ/filter/gain. Deck balance is hidden in there.

SWEET loop size/roll controls for decks a/b using the jogs.

Cue point mode for decks a/b that utilize all 8 buttons along bottom of unit.

scratch, pitch bend, stepless tempo jazz

Check it out if you're playing with this old classic. I've still got all three modifiers used in the DJTT mapping to tackle some Fader/Jog FX

also going to aim for decks c/d regular transport
Lashay Walchak
22.12.2011
I picked up a VCI-100 w/ 1.3 firmware and started my own map from scratch. After mapping my Total Control and having loop roll/move I set out to achieve that on the VCI.

So far I have

Full 4 FX bank controls (tricky to get into, similar to route f/x from the djtt map)

Sample deck 3/4 volume, play, and loading controls (in effect parameter channels)

common EQ/filter/gain. Deck balance is hidden in there.

SWEET loop size/roll controls for decks a/b using the jogs.

Cue point mode for decks a/b that utilize all 8 buttons along bottom of unit.

scratch, pitch bend, stepless tempo jazz

Check it out if you're playing with this old classic. I've still got all three modifiers used in the DJTT mapping to tackle some Fader/Jog FX

also going to aim for decks c/d regular transport

<< Back to DJ TechTools' VCI-100 FAQReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy