Xone 1D as internal mixer
Xone 1D as internal mixer Posted on: 09.10.2009 by Esta Christi Hey guys,my flatmate has recently moved out and has left me minus a mixer, all i have now is a xone 1d. it will be a month till i can afford my own mixer, so am looking for a quick fix. i was believein i could use the rotary knobs to control the eq for now and have tried for ages without any real result. i can get the eqs to move with the knobs but cant manage to get the exact response im looking for. for example if i turn the knob to the complete left, the eq moves to the left but doesnt START moving back right from the extreme left position until i have turned the knob to the extreme right. in other words, after initially moving the knob, the middle position it does not correspond to 0% eq and knob in right position does not correspond to +100% eq. will this have something to do with the modifier values? because i dont know what that means. thanks for your help! | |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Sherry Merza 13.10.2009 | Sorry, that I don |
| Esta Christi 09.10.2009 | Hey guys, my flatmate has recently moved out and has left me minus a mixer, all i have now is a xone 1d. it will be a month till i can afford my own mixer, so am looking for a quick fix. i was believein i could use the rotary knobs to control the eq for now and have tried for ages without any real result. i can get the eqs to move with the knobs but cant manage to get the exact response im looking for. for example if i turn the knob to the complete left, the eq moves to the left but doesnt START moving back right from the extreme left position until i have turned the knob to the extreme right. in other words, after initially moving the knob, the middle position it does not correspond to 0% eq and knob in right position does not correspond to +100% eq. will this have something to do with the modifier values? because i dont know what that means. thanks for your help! |
| Vernon Positano 25.03.2010 | Indeed.. there is no reason why you can't fully control traktor using a 1d, its only a midi device, and as such can be re-mapped to suit your needs. As for whats happening with yours, its impossible to say, other than check the mapping! I really urge all people to get their hands dirty with midi mapping, it will open the possibilities of whatever controller you use, and free it from its physical bonds! |
| Kecia Wnukowski 23.03.2010 | You know there are plenty ones at the Xone's web site and around. Even here. As for the knobs there's no more straight forward thing than to map a eq on those (not on the encoders, it' a bad idea). Check your mapping the corresponding knob should be set as a knob/direct command without soft take over. There's no difficulty here. And no need for any modifier whatsoever. And if you need to set up a eq on a rotary encoder you'll just have to set it up as encoder/relative, and check what would be the best sensitivity and rotary acceleration for your eq. |
| Kareem Goude 23.03.2010 | Did any of you get an idea of getting only a 1D to work properly with TSP ? If anyone out there got a TSI file? Perhaps with a JPEG mapping print? Cheers |
| Sherry Merza 13.10.2009 | Sorry, that I don |
<< Back to Post and find Controller MappingsReply