Quick tempo mapping question... Hey all! I own a Numark Omni Control, and one of the things that annoys me about the pitch bend buttons is that they don't change the pitch permanently, i was wondering whether there was a way to map it so that it does as the pitch slider isn't accurate enough and i hate using the sync button.
Back when i only had a mouse to mix with in Virtual DJ, it had that feature and i found it really useful to get the tracks perfectly in sync and how i want them. I can't seem to find the right Add In under tempo for it, so any help would be appreciated!
Many thanks!
Just noticed this is in the wrong community
, mod(s) please remove or lock. Thanks! |
Dorcas Bassignani
02.08.2010 |
Originally Posted by ohmyjosh
Do you reckon I can apply that to the jog wheel to only work when i have scratch turned off? or will i have a not as sensitive jog wheel when scratching/scrubbing as well as for pitching?
the vci jogs have 2 separate notes/cc's for the pitch bend and scratch. the clear plastic bit (used for pitch bend) outputs a different signal to the metal plate (used for scratching). so you should be able to do it without affecting the scratch sensitivity. just keep in mind the plastic bit has 2 signals, one for each direction. |
Jesusita Capano
31.07.2010 |
Originally Posted by BradCee
set a 100% pitch range, change the pitch bend mapping on the jogwheels to tempo, and drop the sensitivity on the wheels to 1 or 2%? just a quick one off the top of my head.
but it should give a gradual pitch down on the slider and give you the same kind of control as the bend does
Do you reckon I can apply that to the jog wheel to only work when i have scratch turned off? or will i have a not as sensitive jog wheel when scratching/scrubbing as well as for pitching? |
Dorcas Bassignani
01.08.2010 |
Originally Posted by OmniRoss
What i meant was i posted it in the wrong community
but i got a couple of responses here so i'll run with it..!
@Bradcee, what i'm trying to say is that when i change the pitch with the pitch bend buttons i want it to stay where i pitched it too, and not slowly move back? I did as you said and it helped slightly but it's still not accurate enough i'm afraid.
yeah, sorry i kind of aimed that more at jog wheels than buttons, my bad |
Annalisa Shogren
01.08.2010 |
Originally Posted by ohmyjosh
Can you link to the post you found? I'm believe of doing the same thing with my VCI 100's jog wheels when not in scratch mode, i hate the pitch faders on this thing now I'm trying to beatmatch manually instead of tapping sync twice.
What i meant was i posted it in the wrong community
but i got a couple of responses here so i'll run with it..!
@Bradcee, what i'm trying to say is that when i change the pitch with the pitch bend buttons i want it to stay where i pitched it too, and not slowly move back? I did as you said and it helped slightly but it's still not accurate enough i'm afraid. |
Dorcas Bassignani
31.07.2010 |
Originally Posted by ohmyjosh
Can you link to the post you found? I'm believe of doing the same thing with my VCI 100's jog wheels when not in scratch mode, i hate the pitch faders on this thing now I'm trying to beatmatch manually instead of tapping sync twice.
set a 100% pitch range, change the pitch bend mapping on the jogwheels to tempo, and drop the sensitivity on the wheels to 1 or 2%? just a quick one off the top of my head.
but it should give a gradual pitch down on the slider and give you the same kind of control as the bend does |
Annalisa Shogren
30.07.2010 | Hey all! I own a Numark Omni Control, and one of the things that annoys me about the pitch bend buttons is that they don't change the pitch permanently, i was wondering whether there was a way to map it so that it does as the pitch slider isn't accurate enough and i hate using the sync button.
Back when i only had a mouse to mix with in Virtual DJ, it had that feature and i found it really useful to get the tracks perfectly in sync and how i want them. I can't seem to find the right Add In under tempo for it, so any help would be appreciated!
Many thanks!
Just noticed this is in the wrong community
, mod(s) please remove or lock. Thanks! |
Annalisa Shogren
02.08.2010 | How could i set it to it moves up or down 1 Bpm per pitch slide change? |
Dorcas Bassignani
02.08.2010 |
Originally Posted by ohmyjosh
Do you reckon I can apply that to the jog wheel to only work when i have scratch turned off? or will i have a not as sensitive jog wheel when scratching/scrubbing as well as for pitching?
the vci jogs have 2 separate notes/cc's for the pitch bend and scratch. the clear plastic bit (used for pitch bend) outputs a different signal to the metal plate (used for scratching). so you should be able to do it without affecting the scratch sensitivity. just keep in mind the plastic bit has 2 signals, one for each direction. |
Jesusita Capano
31.07.2010 |
Originally Posted by BradCee
set a 100% pitch range, change the pitch bend mapping on the jogwheels to tempo, and drop the sensitivity on the wheels to 1 or 2%? just a quick one off the top of my head.
but it should give a gradual pitch down on the slider and give you the same kind of control as the bend does
Do you reckon I can apply that to the jog wheel to only work when i have scratch turned off? or will i have a not as sensitive jog wheel when scratching/scrubbing as well as for pitching? |
Dorcas Bassignani
01.08.2010 |
Originally Posted by OmniRoss
What i meant was i posted it in the wrong community
but i got a couple of responses here so i'll run with it..!
@Bradcee, what i'm trying to say is that when i change the pitch with the pitch bend buttons i want it to stay where i pitched it too, and not slowly move back? I did as you said and it helped slightly but it's still not accurate enough i'm afraid.
yeah, sorry i kind of aimed that more at jog wheels than buttons, my bad |
Annalisa Shogren
01.08.2010 |
Originally Posted by ohmyjosh
Can you link to the post you found? I'm believe of doing the same thing with my VCI 100's jog wheels when not in scratch mode, i hate the pitch faders on this thing now I'm trying to beatmatch manually instead of tapping sync twice.
What i meant was i posted it in the wrong community
but i got a couple of responses here so i'll run with it..!
@Bradcee, what i'm trying to say is that when i change the pitch with the pitch bend buttons i want it to stay where i pitched it too, and not slowly move back? I did as you said and it helped slightly but it's still not accurate enough i'm afraid. |
Dorcas Bassignani
31.07.2010 |
Originally Posted by ohmyjosh
Can you link to the post you found? I'm believe of doing the same thing with my VCI 100's jog wheels when not in scratch mode, i hate the pitch faders on this thing now I'm trying to beatmatch manually instead of tapping sync twice.
set a 100% pitch range, change the pitch bend mapping on the jogwheels to tempo, and drop the sensitivity on the wheels to 1 or 2%? just a quick one off the top of my head.
but it should give a gradual pitch down on the slider and give you the same kind of control as the bend does |
Jesusita Capano
31.07.2010 | Can you link to the post you found? I'm believe of doing the same thing with my VCI 100's jog wheels when not in scratch mode, i hate the pitch faders on this thing now I'm trying to beatmatch manually instead of tapping sync twice. |
