Hercules DJ console MK2 controller mapping for virtualdJ 6 and traktor scratch pro
Home :: Post and find Controller Mappings :: Hercules DJ console MK2 controller mapping for virtualdJ 6 and traktor scratch proReply
Hercules DJ console MK2 controller mapping for virtualdJ 6 and traktor scratch pro Posted on: 04.11.2009 by Raina Dhaliwal hiii this is Reggie here i have a Hercules DJ console mk2 controller and am using a license version of virtual dj controller but i am trying to use the controller with virtual DJ 6 for trying out and it does not take it in as a controller it just act as a plain sound card , so how do i get my DJ console Mk 2 to work with virtual DJ 6 am trying a lot but all in vain even though the setting r there for the controller in virtual DJ 6 but after even loading it does not wok plzzzzzzz help me out here Same as the above problem am also trying it out for traktor scratch pro but there r few problems with it 1/ after importing the setting for DJ console mk2 setting in the traktor they don't remain stable, sometimes the jog doesn't work to move the song for cueing, have problem using the headphone to select particular deck some time this works fine some time it doesn't , even though all work well and i do save the settings and next time i start the program and load these setting back i loose some mapping of the jog and the head phone cue selector plzzzz help me out i i have asked a lot here but it will really be great if u guys can sort out this mess 4 me thanking u in advance | |
| Adolfo Zelayandia 02.12.2009 |
Originally Posted by djranking
s14
|
| Adolfo Zelayandia 11.11.2009 |
Originally Posted by djreggy
|
| Adolfo Zelayandia 05.11.2009 |
Originally Posted by djreggy
The Monitor function works fine in the default tsi make sure when you first load traktor you click using your mouse the monitor button for A when the device is set to A and it should flick to B when you switch to B and back again. I have no issues with the Jogs, it would seem that you are in a either effects, loops or cue mode... when you use the 123 effects/cue/loops buttons the jogs are automatically locked until you come out of the selected mode... this is a modifier in the tsi settings. This is why i suggest you spend a couple of hours remapping your device from scratch... Are you mixing internally or externally, what OS are you running and what driver version do you have installed? |
| Raina Dhaliwal 04.11.2009 | hiii this is Reggie here i have a Hercules DJ console mk2 controller and am using a license version of virtual dj controller but i am trying to use the controller with virtual DJ 6 for trying out and it does not take it in as a controller it just act as a plain sound card , so how do i get my DJ console Mk 2 to work with virtual DJ 6 am trying a lot but all in vain even though the setting r there for the controller in virtual DJ 6 but after even loading it does not wok plzzzzzzz help me out here Same as the above problem am also trying it out for traktor scratch pro but there r few problems with it 1/ after importing the setting for DJ console mk2 setting in the traktor they don't remain stable, sometimes the jog doesn't work to move the song for cueing, have problem using the headphone to select particular deck some time this works fine some time it doesn't , even though all work well and i do save the settings and next time i start the program and load these setting back i loose some mapping of the jog and the head phone cue selector plzzzz help me out i i have asked a lot here but it will really be great if u guys can sort out this mess 4 me thanking u in advance |
| Armando Horridge 15.04.2011 | Cheers for this its a big help to me. |
| Chaya Hotopp 11.12.2009 | Got it to work - thanks! |
| Chaya Hotopp 08.12.2009 | Not working. It tells me to load the tks file - there are three. I doesn't make any difference which one I click on, none of them do anything. What do I do now? Also the jpg doesn't seem to correspond to any settings I have, for example FX2 - 3 ammount. There are two possible fx locations one in Decks and one in Master and neither of them have 'ammount' as an option. Infact I despite not knowing whether to choose from decks or master even in these categories there is also a choice between effect knob 1 or effect button 1, so a bit on the incomplete side there. |
| Chaya Hotopp 08.12.2009 | Hi. Dean etc...thanks for taking the time and trouble to post these settings. It was becoming a headache for me and i believe - though i've still got to try it - you've sorted my problems for me. Cheers boys. Blackjake |
| Celsa Courtemanche 02.12.2009 | Hercules provides mapping for Traktor as well as a document explaining how to configure the audio par on their support site: http://ts.hercules.com/eng/index.php...&pid=177&cid=5 As for Virtual DJ 6, be sure to download the latest update for Virtual DJ (version 6.04 at the moment) and the most recent driver from Hercules. Once you launch VDJ, go into the software configuration > Mapper tab, and normally, the MK2 should appear in the list. |
| Jeanne Yurich 02.12.2009 | Hi Dean, I rooted around a bit actually after I posted that and found that Hercules have made a .tsi available for 1.2.2 so I imported that and it is all working good. Thanks for your help! |
| Adolfo Zelayandia 02.12.2009 |
Originally Posted by djranking
s14
|
| Nella Albany 01.12.2009 | i suggest you spend a couple of hours remapping your device from scratch |
| Adolfo Zelayandia 01.12.2009 | Hi jval278, yeah the lights work in 1.2.1 just map them to the correct midi output, i havnt got around to installing 1.2.2 yet i am steady away with 1.1.2 for the moment... i have posted my 1.2.1 tsi on here somewhere... in that file the lights are working... might be an idea to back up your tsi and load up mine and take a look at the output settings and adapt it to yours. PD. The latency i stated in previous posts is now much lower... on my main pc it runs without glitches at 1ms very low... and on the laptop i use for djing live its solid at 5ms... not sure but i have a feeling that windows 7 x64 seems to handle the application and drivers much better than previous versions. l8rz |
| Jeanne Yurich 01.12.2009 | Hi guys, thanks Dean for the info - if I had known this was here I wouldn't have spent an hour figuring out the mapping by trial and error! I just wondered if you managed to get the LED lighting to come on when selecting different modes Fx/Cue/Loop. I updated the driver and firmware for the Hercules MK2 and the LEDs were working until I had the stupid brainwave of updating Traktor Pro to 1.2.2 and now I have the same problem again... is it a driver problem again? ps the buttons do have an 'output' mode for LED options in the mapping but it doesnt seem to be working |
| Adolfo Zelayandia 14.11.2009 | Hi, i have attached my personal hercules mk2 map for traktor 1.1.2 I will update it to the 1.2.3 version when this version of traktor is available for the masses! |
| Adolfo Zelayandia 11.11.2009 |
Originally Posted by djreggy
|
| Raina Dhaliwal 08.11.2009 | hi-ii Dean thanks for the earlier replies i have sough-ted out the control for virtual dj 6 its working gr8 and the traktor too. i only have a small issue to resolve with the led of my MK2 controller since u told me that when i am in effects ,cue or loop mode the jog locks it self but then due to the led lights not coming on i d don't know in Wat section i am in as i want to use the jog to cue my tracks i have to keep pressing it till the jog comes on so if u can give me some tips on mapping the LED on the dj console MK2 as i don't know any thing about midi mapping. would really like to learn midi mapping i want the button to work as pressed once FX led lighting up to use the effect pressed the second time CUE led lighting up to use the cues pressed the third time LOOP led lighting up to use the loop and pressing the forth time i need all the led off so that the jog is on to be used for cueing if u could give me some settings i can try plzz or any document i could refer or take some knowledge on how to map it |
| Adolfo Zelayandia 07.11.2009 | Hi. As i stated in an earlier post i have never used Virtual DJ - Software* with this controller so i cannot help you there. Sorry mate... i believe you should read the posts correctly. |
| Raina Dhaliwal 07.11.2009 | Hii Dean reggie here again my friend has virtual dj 6 pro version and also got the time code cd's can i use my dj console mk2 with the time code cd's how do connect it , I am using a pioneer cmx 3000 player so how do i connect these 3 to the laptop i am also having a small problem with individual listening of each deck on the virtual6 pro when i connect my DJ console mk2 to it when i flip my switch on the controller of the headphone selection to deck A or Deck B i cannot hear single deck i can only hear them in mix and in the split mode i can hear only the playing deck the deck that i am cueing cannot be heard so how do i solve this i want to cue each deck like on a real mixer u know what i mean rather than listening to the master out |
| Adolfo Zelayandia 05.11.2009 |
Originally Posted by djreggy
The Monitor function works fine in the default tsi make sure when you first load traktor you click using your mouse the monitor button for A when the device is set to A and it should flick to B when you switch to B and back again. I have no issues with the Jogs, it would seem that you are in a either effects, loops or cue mode... when you use the 123 effects/cue/loops buttons the jogs are automatically locked until you come out of the selected mode... this is a modifier in the tsi settings. This is why i suggest you spend a couple of hours remapping your device from scratch... Are you mixing internally or externally, what OS are you running and what driver version do you have installed? |
| Raina Dhaliwal 05.11.2009 | hi dean thnx 4 the reply my controller does work with traktor scratch pro but there r some issues like when i play a track on deck A, the head phone selector of the controller when switched to A or for he same reason switched to B i cannot listen on the track but when kept on mix mode on the selector or split it works how do i hear each deck individually some time it comes on and sometime doesn't Same goes for he jog dial , when i change a track on the deck and use the dial to move it around to cue for the first time it works fine but when changed again the jog shows no response and the track does not move same for the other deck the midi symbol on the traktor blinks stating it is receiving but then the jog as well as the head phone selector problems remain the same any tips for resolving it do mail me the .tsi file for traktor 1.1.2 and 1.2 |
| Adolfo Zelayandia 04.11.2009 | I have attached the map layout of the Hercules MK2 if you want i can post the .tsi for Traktor 1.1.2 and 1.2 *the effects unit 2 buttons are the sames as effects unit 1 small error in my image, on/off in chained and reset - select 1 select 2 in advanced As requested my personal hercules mk2 tsi.. |
| Adolfo Zelayandia 04.11.2009 | Hi Reggie. I have a Hercules DJ Console and it works seamlessly with Traktor 1.1.2 and 1.2.2 I have never nor want to use Virtual DJ - Software* with this controller so i cannot help you there. I would recommend that you go to the hercules support page and download the latest drivers for the device this will also update the ROM chip on the device and bring it all up to date. My settings in the DJ Console manager are 48000hz ASIO 24-Bit @ 10ms. This works well with external mixing, giving me two decks - A and B which i run into an external mixer. Select the Hercules ASIO as your main device and your audio input settings are configured correctly inside traktor. As for the mapping... there is a default tsi that comes with Traktor this gives you all the stuff you need to mix, if you want to customize the mapping i suggest you start from scratch... find the hecules midi mapping manual and assign the buttons and lights to your needs. Always make regular exports of your tsi files and settings in Traktor 1.1.2..... |
<< Back to Post and find Controller MappingsReply