Sharing Map 1.0
Sharing Map 1.0 Posted on: 21.04.2011 by Eddie Maina so, i searched around a bunch and asked a few questions and i thought i would share my map in its current state. for my v1 it seems pretty workable. leds and led rings seem to work well. there's some space left for future enhancements.- shift+load places the track into the deck and begins play - cue slots are red, then blinking green when loaded, solid when active - play is blinking green in pause state, solid when play - del + cue will delete a cue - set a cue by touching the cue button - load sampl + sampl play loads sample deck c/d from deck a/b - samples are red when empty, blinking green when loaded, solid green when playing - bpm signal is a visual indicator of the bpm - mas vol is a vu meter of the master out - filters instead of EQ | |
Eddie Maina 21.04.2011 |
Originally Posted by kooper1980
|
Eddie Maina 21.04.2011 |
Originally Posted by kooper1980
here's how i work the deck: 1. Fader on Deck A down 2. Load track into Deck A 3. Deck A starts play on load AND activates sync 4. Tap cue point to ready track 5. Release cue point 6. Bring fader up I should also mention I work off Master Tempo... so everything - sample decks and track decks are locked to Master Tempo... you can change Mas Tempo by holding shift and turning the knob above the cue volume fader... |
Eddie Maina 21.04.2011 |
Originally Posted by Graham Campbell
if you do run across any issues, please post them here so i can fix them. |
Eddie Maina 21.04.2011 | so, i searched around a bunch and asked a few questions and i thought i would share my map in its current state. for my v1 it seems pretty workable. leds and led rings seem to work well. there's some space left for future enhancements. - shift+load places the track into the deck and begins play - cue slots are red, then blinking green when loaded, solid when active - play is blinking green in pause state, solid when play - del + cue will delete a cue - set a cue by touching the cue button - load sampl + sampl play loads sample deck c/d from deck a/b - samples are red when empty, blinking green when loaded, solid green when playing - bpm signal is a visual indicator of the bpm - mas vol is a vu meter of the master out - filters instead of EQ |
Eddie Maina 21.04.2011 |
Originally Posted by kooper1980
|
Eddie Maina 21.04.2011 |
Originally Posted by kooper1980
here's how i work the deck: 1. Fader on Deck A down 2. Load track into Deck A 3. Deck A starts play on load AND activates sync 4. Tap cue point to ready track 5. Release cue point 6. Bring fader up I should also mention I work off Master Tempo... so everything - sample decks and track decks are locked to Master Tempo... you can change Mas Tempo by holding shift and turning the knob above the cue volume fader... |
Kristofer Krauel 21.04.2011 | ps..... Sync?? |
Kristofer Krauel 21.04.2011 | This looks pretty sweet. I sold my APC before coming to Traktor but im pretty sure that with this map i'd be rocking!!! Nice work man!! |
Eddie Maina 21.04.2011 |
Originally Posted by Graham Campbell
if you do run across any issues, please post them here so i can fix them. |
Christia Saltmarsh 21.04.2011 | This looks good Shane, nice and clean, not overly complex, I'm definitely going to load this one up to see what I can learn from it on my own version! Thanks for sharing! |
Eddie Maina 21.04.2011 | updated to 1.1 with loop recorder... |
Eddie Maina 21.04.2011 | next enhancement will be adding the loop recorder... simply going to map Dry/Wet to the x-fader and then map Size, Rec and Del to the buttons above. apparently forgot |
<< Back to Post and find Controller MappingsReply