apc40 knobs... sensitive

Home :: Post and find Controller Mappings :: apc40 knobs... sensitiveReply
apc40 knobs... sensitive
Posted on: 30.04.2011 by Eddie Maina
i have my filters, gains set to my track control knobs... very fickle... some times i have to move knob a lot and traktor barely responds... sometimes little... any ideas why its so fickle?

i tried knob and encoder...
Nedra Fresneda
04.05.2011
Originally Posted by joostiisme
Sorry to steal your thread, but my question is about the LED rings too.
I've got them working, took a while to figure out the +8 thing.
But I've got two layers mapped on the same knobs. With a shift modifier.
If I now move a knob in mod 1=0 the LED respond correctly, then when I press the modifier the LED's on that layer have changed too. and visa versa.
The LED are already assigned to mod=0 and mod=1 for the different functions.
how can I change this? is there a way to make

Can you give a quick guide to send monitor state? is it just add sed monitor state to alot of buttons in inverted state?
Just add an inverted send mon on the button that changes the modifier status.
Nedra Fresneda
01.05.2011
Originally Posted by shanefontane
cool. thanks. ill try this. i thought i may have done this already but possible not.
If they move slower they are on the same CC, as simple as that. It's how the APC behaves natively
Eddie Maina
01.05.2011
Originally Posted by padi_04
Set the led to the CC# +8, otherwise they are fighting each other (slowing movement or making it act funny if latency is high enough).
cool. thanks. ill try this. i thought i may have done this already but possible not.
Eddie Maina
30.04.2011
Originally Posted by padi_04
knob>direct

apc have endless 0-127 knobs, except the cue volume (only true encoder)
weird. i tried this too. works great when track is not playing. when track plays becomes fickle again.
Nedra Fresneda
30.04.2011
Originally Posted by shanefontane
i have my filters, gains set to my track control knobs... very fickle... some times i have to move knob a lot and traktor barely responds... sometimes little... any ideas why its so fickle?

i tried knob and encoder...
knob>direct

apc have endless 0-127 knobs, except the cue volume (only true encoder)
Eddie Maina
30.04.2011		i have my filters, gains set to my track control knobs... very fickle... some times i have to move knob a lot and traktor barely responds... sometimes little... any ideas why its so fickle?

i tried knob and encoder...
Nedra Fresneda
04.05.2011
Originally Posted by joostiisme
Sorry to steal your thread, but my question is about the LED rings too.
I've got them working, took a while to figure out the +8 thing.
But I've got two layers mapped on the same knobs. With a shift modifier.
If I now move a knob in mod 1=0 the LED respond correctly, then when I press the modifier the LED's on that layer have changed too. and visa versa.
The LED are already assigned to mod=0 and mod=1 for the different functions.
how can I change this? is there a way to make

Can you give a quick guide to send monitor state? is it just add sed monitor state to alot of buttons in inverted state?
Just add an inverted send mon on the button that changes the modifier status.
Demetra Pinizzotto
04.05.2011		Sorry to steal your thread, but my question is about the LED rings too.
I've got them working, took a while to figure out the +8 thing.
But I've got two layers mapped on the same knobs. With a shift modifier.
If I now move a knob in mod 1=0 the LED respond correctly, then when I press the modifier the LED's on that layer have changed too. and visa versa.
The LED are already assigned to mod=0 and mod=1 for the different functions.
how can I change this? is there a way to make

Can you give a quick guide to send monitor state? is it just add sed monitor state to alot of buttons in inverted state?
Eddie Maina
02.05.2011		yep. actually - i had both programmed... an out for the same cc and an out for the +8... bah...

this def fixed the problem...
Nedra Fresneda
01.05.2011
Originally Posted by shanefontane
cool. thanks. ill try this. i thought i may have done this already but possible not.
If they move slower they are on the same CC, as simple as that. It's how the APC behaves natively
Eddie Maina
01.05.2011
Originally Posted by padi_04
Set the led to the CC# +8, otherwise they are fighting each other (slowing movement or making it act funny if latency is high enough).
cool. thanks. ill try this. i thought i may have done this already but possible not.
Nedra Fresneda
30.04.2011		Set the led to the CC# +8, otherwise they are fighting each other (slowing movement or making it act funny if latency is high enough).
Eddie Maina
30.04.2011		hmmm... i notice the issue more when i try fine increments with the knob... i can spin the knob ever so slightly and the gain or filter kinda stay in place on traktor...
Eddie Maina
30.04.2011		i have my led set to pan... this shouldnt be an issue though - right?
Eddie Maina
30.04.2011
Originally Posted by padi_04
knob>direct

apc have endless 0-127 knobs, except the cue volume (only true encoder)
weird. i tried this too. works great when track is not playing. when track plays becomes fickle again.
Nedra Fresneda
30.04.2011
Originally Posted by shanefontane
i have my filters, gains set to my track control knobs... very fickle... some times i have to move knob a lot and traktor barely responds... sometimes little... any ideas why its so fickle?

i tried knob and encoder...
knob>direct

apc have endless 0-127 knobs, except the cue volume (only true encoder)

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy