Reloop DJ2 CE/IE/ME Sample map for TPro2
Reloop DJ2 CE/IE/ME Sample map for TPro2 Posted on: 16.04.2011 by Demetrius Hoft Hi, Here is my map i have done for all the reloop dj2 owners out there. This map for Tpro 2 will allow you to control sample decks in the 3 & 4 position only, these have to be loaded with decks 1 & 2 or even 3 normal decks. To use the sample decks via the controller all you have do is press the fx jog mode button, the left for deck C or the right for deck D. I these aren't pressed the controller will function as normal. I have used the 4 loop buttons , the 4 effect encoders and the buttons underneath them. To load a loop into the required slot press the shift and any of the 4 loop buttons (slot 1 at the top down to slot 4 at the bottom) Without the shift being pressed the fx encoders can pressed to start/stop the samples and twisted for volume, the led's will stay on in this mode or you can press the buttons below to retrigger these. The loop buttons now control the playback mode of each sample slot - loop or single play and will be lit in loop mode. When the shift is pressed the push encoders are now used to control the filters for each slot but the buttons underneath them stay as the retriggers for the slots. Please have a go and give me some feedback of what you believe and any improvements i can make. DJ2 CE_IE_ME TPro2 Sample Mode v1.00.tsi | |
| Demetrius Hoft 01.06.2011 |
Originally Posted by cverkooyen
|
| Demetrius Hoft 16.04.2011 | Hi, Here is my map i have done for all the reloop dj2 owners out there. This map for Tpro 2 will allow you to control sample decks in the 3 & 4 position only, these have to be loaded with decks 1 & 2 or even 3 normal decks. To use the sample decks via the controller all you have do is press the fx jog mode button, the left for deck C or the right for deck D. I these aren't pressed the controller will function as normal. I have used the 4 loop buttons , the 4 effect encoders and the buttons underneath them. To load a loop into the required slot press the shift and any of the 4 loop buttons (slot 1 at the top down to slot 4 at the bottom) Without the shift being pressed the fx encoders can pressed to start/stop the samples and twisted for volume, the led's will stay on in this mode or you can press the buttons below to retrigger these. The loop buttons now control the playback mode of each sample slot - loop or single play and will be lit in loop mode. When the shift is pressed the push encoders are now used to control the filters for each slot but the buttons underneath them stay as the retriggers for the slots. Please have a go and give me some feedback of what you believe and any improvements i can make. DJ2 CE_IE_ME TPro2 Sample Mode v1.00.tsi |
| Alfred Verry 02.06.2011 | No I mean pitch bend track A and B with the jog wheel when the scratch / dry wet and search button are off. |
| Demetrius Hoft 01.06.2011 |
Originally Posted by cverkooyen
|
| Alfred Verry 29.05.2011 | Hi davendiva, great work! Can you also add the working of the jog wheel to pitch bend with it? |
| Demetrius Hoft 19.04.2011 | please look at my newest thread to see my map that now includes loop rec mode. |
| Kristofer Krauel 18.04.2011 | I will post mine if necessary. Only problem is I use a midi-fighter for effects so I've sacrificed the effects section of my reloop in order to have sample deck and loop recorder control without the need for shift functions or modifiers. |
| Abby Colagiovanni 19.04.2011 | aw from the labrary? i didnt try to load from the library only ftom the loop recorder ok i will give it a try...and ty for sharing your mapping mate |
| Demetrius Hoft 18.04.2011 | Have u tried the shift on with fx jog buttons(sample mode) on for each or both decks, this also turns the volume encoders into filters? The shift will only change the sample mode buttons when pressed in conjunction with the sample mode being on. Plus I mapped them to load from libary and not the decks, but this can be changed easily to say for instance load 2 from library and 2 from the players. Hope this helps. Sorry I couldn't do it sooner as i only got my copy of Traktor pro2 a couple of days before i made the map. |
| Abby Colagiovanni 17.04.2011 | why not put up yours to? i can't seem to can load the samples with loop buttons+swift with this mapping (if i do it manual with mouse i have control of sample decks though) thanks for the mapping davediva |
| Kristofer Krauel 17.04.2011 | Hey man. Nice work. I've just finished doing something very similar with my DJ2 IE. wish you'd done this sooner..... Would have saved me a lot of work. |
<< Back to Post and find Controller MappingsReply