A little mapping help please? And maybe some recommendations?

Home :: Post and find Controller Mappings :: A little mapping help please? And maybe some recommendations?Reply
A little mapping help please? And maybe some recommendations?
Posted on: 11.06.2011 by Chara Blumenfeld
Hi all

So I am making a tsi for use with the VCI100SE and X1. Basically, it's going to be the standard mapping, but using the FX section of the VCI (now redundant because of the X1) to either control:

1) when CONTROL FX 1 is selected
Four preconfigured groups of effects (e.g. ArmyofMe4340's rather lovely Iceverb build up http://www.youtube.com/watch?v=lMbsAIBs3uE) with the knobs and four other button effects (maybe Beatmashes or something etc.) with buttons.

2) when CONTROL FX 2 is selected
To control Deck D as a sample deck with the four buttons firing off samples and the knobs for filtering each sample.

However, one thing I currently can't figure is setting the knobs in FX2 mode as filters for the sample deck, with the null value starting in the middle of the knob parameter (i.e. 50%). I can get them working but only starting from 0% and thus they can't filter out the trebles.

Also I can only figure out how to store samples on the fly from one specific deck (in this a prechosen Deck B). Is there a way of making it possible to select from A or B?

Could someone please give a noob a bit of help?

Also, I don't really ever use the bottom pad of the X1, so I've got 16 buttons and 2 knobs to play with (baboom chish). Anyone got any recommendations for stuff to go here? I mainly mix deep house/deep disco...

I'm also deleting Fader FX from my TSI because it always makes my VCI crash. I will of course post the TSI on here once it is up to standard.

CHEERS!
Chara Blumenfeld
11.06.2011
Hi all

So I am making a tsi for use with the VCI100SE and X1. Basically, it's going to be the standard mapping, but using the FX section of the VCI (now redundant because of the X1) to either control:

1) when CONTROL FX 1 is selected
Four preconfigured groups of effects (e.g. ArmyofMe4340's rather lovely Iceverb build up http://www.youtube.com/watch?v=lMbsAIBs3uE) with the knobs and four other button effects (maybe Beatmashes or something etc.) with buttons.

2) when CONTROL FX 2 is selected
To control Deck D as a sample deck with the four buttons firing off samples and the knobs for filtering each sample.

However, one thing I currently can't figure is setting the knobs in FX2 mode as filters for the sample deck, with the null value starting in the middle of the knob parameter (i.e. 50%). I can get them working but only starting from 0% and thus they can't filter out the trebles.

Also I can only figure out how to store samples on the fly from one specific deck (in this a prechosen Deck B). Is there a way of making it possible to select from A or B?

Could someone please give a noob a bit of help?

Also, I don't really ever use the bottom pad of the X1, so I've got 16 buttons and 2 knobs to play with (baboom chish). Anyone got any recommendations for stuff to go here? I mainly mix deep house/deep disco...

I'm also deleting Fader FX from my TSI because it always makes my VCI crash. I will of course post the TSI on here once it is up to standard.

CHEERS!
Dana Ordinario
13.06.2011
For the filter thing simply make a command thats Mixer - Filter LEarn it to the filter on button. Then for Type of Controller select Button and Interaction select Direct then for amount set it to .500
That will always reset the filter to the middle whenever it is turned on. Hope that helps.
I haven't done a lot of work with sampling mapping(yet!) but for choosing which deck to grab the sample from check to see if there is a deck focus that is set to global or focus. Barring that unless I knew exactly which command you were trying to work with then I couldn't help you. Let me know how it turns out.

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy