traktor templates

traktor templates
Posted on: 12.07.2011 by Karie Jose
does anyone know how you use the traktor template creator from traktorbible?
i downloaded mine for the my apc40 and i haven't the slightest on how to map anything in it let alone use adobe

any help out there??
Leeanna Ayla
02.08.2011
Originally Posted by djmior
padi - how do i remap the toggles from fx deck focus a and b to another pair of buttons on the apc??
Find those commands in the controller manager and learn them to the new button. You may need to change other buttons as well depending on modifiers and what else is going on in there.
Chasidy Heckenbach
23.07.2011
Originally Posted by djmior
yeah i want to ...but i want to move some of his mappings around to other buttons...without underestanding how it works i have no clue what to move/delete...it's messed..but i'll see what i come up with
one easy trick - tho there might be an easier way - is to add any IN, press 'learn' and press the button i want to find in the map - sort by the midi ch/note/cc and then delete the one i added (before i forget). then you will have hilited and together any mappings that are associated with that control.
Chasidy Heckenbach
23.07.2011
Originally Posted by djmior
thanks guys..

i'm trying..and i'll check out that link you've posted...i'll see what i can do
cool give it a shot and post questions etc. i only started mapping a few months ago and found that starting to create my own mapping rather than trying to understand someone else's one was the way to go.

which at least u can do here if you do what @padi_04 said and delete the C&D mappings only as then u have a clean sheet to map the sample decks leaving decks A&B as they were...
Chasidy Heckenbach
23.07.2011
Originally Posted by djmior
again..if i can show a picture of what i'm looking to accomplish is there anyone who could give me a tutorial on how to achieve this while not having to build the tsi on their own for me
if you have specific problems then i'm sure people will help you out - but not as broad as "can someone map all these functions for me" etc

mapping in traktor can take a lot of time - but it's not as tricky as you might believe.

the controller editor layout pretty much sucks but doesnt take too much trial and error to get into it.

there's loads of gereral tips in this thread http://www.djranking s.com/community /showthread.php?t=23910 and you can find answers to most of your questions by searching the community i am sure.

but feel free to post specific questions etc.
Karie Jose
22.07.2011
Originally Posted by killing_kindness
i don't believe you understand the amount of time/effort it takes to map a .tsi. if you don't want to learn to do it yourself it's better to either find a .tsi someone already made somewhere
i do understand the amount of time it takes, however i don't understand some of the function within the control manager setting..you have to understand..i'm going from being able to create all of my own custom racks in ableton live to jumping into traktor and trying to do the same things..it's not been an easy transition to say the least.

i'm just very unfamiliar with how the mapping functions work and how to apply them to the apc...i'm using padi's most resent tsi as a base but i'm stuck on what the modifiers mean and how to map the proper led outputs. i've already mapped out some of sample decks but i'm scared to delete functions which apply to decks c/d..

i'm hoping to integrate the sample decks just below decks a/b so i don't have to use 2 pages...

at first i was just gonna use 1 sample deck in the area between decks a/b but i don't seem to understand how to program the i/o outputs to the LEDs..another thing i don't understand is the modifiers ..what are they for and what's their function?

again..if i can show a picture of what i'm looking to accomplish is there anyone who could give me a tutorial on how to achieve this while not having to build the tsi on their own for me
Karie Jose
11.08.2011
ok..so now that i've completed my apc40 template..i thought i'd share a video of it so you guys can see how it works

http://www.youtube.com/watch?v=Y7nKFyqkTBo

sorry for the stuff popping up (ie pic of my car and low battery) but i believe you guys get the idea
Karie Jose
01.08.2011
ok..so i believe i've done it..i've modified padi's template with one of my own and i believe it's gonna work out just fine..

i'll still have to work out some kinks and figure out how to incorporate the sample decks..when i have the finished product i'll have it up for everyone to check out
Karie Jose
01.08.2011
the problem is..i can't find them..looks like the track selection buttons are the ones controlling the effects..i want to move them into the scene launch section
Leeanna Ayla
02.08.2011
Originally Posted by djmior
padi - how do i remap the toggles from fx deck focus a and b to another pair of buttons on the apc??
Find those commands in the controller manager and learn them to the new button. You may need to change other buttons as well depending on modifiers and what else is going on in there.
Karie Jose
02.08.2011
padi - how do i remap the toggles from fx deck focus a and b to another pair of buttons on the apc??
Chasidy Heckenbach
23.07.2011
Originally Posted by djmior
yeah i want to ...but i want to move some of his mappings around to other buttons...without underestanding how it works i have no clue what to move/delete...it's messed..but i'll see what i come up with
one easy trick - tho there might be an easier way - is to add any IN, press 'learn' and press the button i want to find in the map - sort by the midi ch/note/cc and then delete the one i added (before i forget). then you will have hilited and together any mappings that are associated with that control.
Karie Jose
23.07.2011
yeah i want to ...but i want to move some of his mappings around to other buttons...without underestanding how it works i have no clue what to move/delete...it's messed..but i'll see what i come up with
Chasidy Heckenbach
23.07.2011
Originally Posted by djmior
thanks guys..

i'm trying..and i'll check out that link you've posted...i'll see what i can do
cool give it a shot and post questions etc. i only started mapping a few months ago and found that starting to create my own mapping rather than trying to understand someone else's one was the way to go.

which at least u can do here if you do what @padi_04 said and delete the C&D mappings only as then u have a clean sheet to map the sample decks leaving decks A&B as they were...
Karie Jose
24.07.2011
thanks guys..

i'm trying..and i'll check out that link you've posted...i'll see what i can do
Nedra Fresneda
23.07.2011
^ This

You will have to learn the same way we all did mate, it's the best for you anyways.

PS: I sold my APC some time ago so even if I did map it, debugging would be impossible.

PS2: The last time I exported it was in Oct '10, so the map ain't that new
Chasidy Heckenbach
23.07.2011
Originally Posted by djmior
again..if i can show a picture of what i'm looking to accomplish is there anyone who could give me a tutorial on how to achieve this while not having to build the tsi on their own for me
if you have specific problems then i'm sure people will help you out - but not as broad as "can someone map all these functions for me" etc

mapping in traktor can take a lot of time - but it's not as tricky as you might believe.

the controller editor layout pretty much sucks but doesnt take too much trial and error to get into it.

there's loads of gereral tips in this thread http://www.djranking s.com/community /showthread.php?t=23910 and you can find answers to most of your questions by searching the community i am sure.

but feel free to post specific questions etc.
Karie Jose
22.07.2011
Originally Posted by killing_kindness
i don't believe you understand the amount of time/effort it takes to map a .tsi. if you don't want to learn to do it yourself it's better to either find a .tsi someone already made somewhere
i do understand the amount of time it takes, however i don't understand some of the function within the control manager setting..you have to understand..i'm going from being able to create all of my own custom racks in ableton live to jumping into traktor and trying to do the same things..it's not been an easy transition to say the least.

i'm just very unfamiliar with how the mapping functions work and how to apply them to the apc...i'm using padi's most resent tsi as a base but i'm stuck on what the modifiers mean and how to map the proper led outputs. i've already mapped out some of sample decks but i'm scared to delete functions which apply to decks c/d..

i'm hoping to integrate the sample decks just below decks a/b so i don't have to use 2 pages...

at first i was just gonna use 1 sample deck in the area between decks a/b but i don't seem to understand how to program the i/o outputs to the LEDs..another thing i don't understand is the modifiers ..what are they for and what's their function?

again..if i can show a picture of what i'm looking to accomplish is there anyone who could give me a tutorial on how to achieve this while not having to build the tsi on their own for me
Lesha Roan
22.07.2011
i don't believe you understand the amount of time/effort it takes to map a .tsi. if you don't want to learn to do it yourself it's better to either find a .tsi someone already made somewhere, or maybe someone would do what you're asking if you paid them for their time. doing more than a few simple buttons, due to the nature of the controller manager in traktor, takes a good amount of time and i wouldn't be surprised if you have a hard time finding someone with the goodwill to just do it without anything to gain from it.
Karie Jose
21.07.2011
if i can put the mapping that could work in a picture..do you believe that you tech guys can re-write the tsi to match?
Karie Jose
21.07.2011
i tried...but i dont understand how to get the multilevel mapping funtions to work and get the led outputs...
put it this way..i have the ideas..just not the technical knowledge on how to do it
Nedra Fresneda
15.07.2011
Delete the 2 pages assigned to C&D and rebuild that part. There is a reason why I divided it
Karie Jose
15.07.2011
yeah those mappings..well..reading i get the asumption that you can..
i guess i don't read good.

the thing is..i'm trying to re-map padi's new traktor template to work in conjunction with tsp2..but instead of having 4 decks i want decks c/d to be the sample decks..

has anyone attempted such and edit and if so i'll like to try it out
Leeanna Ayla
13.07.2011
Yeah these are just a tool yo help plan out mappings. They don't work with traktor.
robin loo
13.07.2011
you mean joost's templates?

this are only pdfs for documenting mappings you created, not mappings themselfs..
Karie Jose
13.07.2011
Originally Posted by photojojo
You click on the spot you want to type in.
ok..but how is that mapping? do you not need to identify the function of the button in traktor? as well..how does it map the i/o signals to the leds let alone create a shift button for secondary functions..
Leeanna Ayla
12.07.2011
You click on the spot you want to type in.

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy