My MPK MINI Mapping
My MPK MINI Mapping Posted on: 17.05.2011 by Nannie Preve still a work in progressbut I thought I'd share, even though mine has issues w/ pads acting on there own, others do not, and its pretty awesome still for only $75 + s/h believeing of eliminating filter knob (definitely eliminating vol. knob hah) and the hi/mid/lo and adding more effects controls. anyone know or can point me in the right direction to setting up the knobs so that they contol any effect I select in traktor instead of a pre-defined effect? here's the mpk mini midi presets u need to upload to the controller http://www.4shared.com/file/60Y9SAsI...presetccs.html please let me know how you believe I could better this setup. edit: known issues: to play track you need to press shift.2 + play, shift.2 is also nudge -, so the track moves when u do so, causing to go out of sync, just tap the sync button again for now til i work around that. filter knob: like the image says you need to rotate ful left then right ... back to middle prior to activating filter for it to work correctly, otherwise you will jump in at a random rotation. effects: drama sweep / echo frz works fine (drama sweep is alway on w/ the knob) but beatmasher will start near the middle after drama sweep has been initiated on the track, need to to a full rotation right then left to clear this. anyone know of a way to get around that issue plz let me know. ---- this last issue is more of a software one than a mapping one, once you have blending and gone on to the next track I would recommend un-syncing that track, if you do not u run the risk of the track slowing down or speeding up to the original tempo once you stop the previous track, I believe this has to do w/ having the clock set to auto. ---- EDIT EDIT image is labeled wrong for the effects DECK A = 1 & 3 DECK B = 2 & 4 Sorry for the confusion | |
| Nannie Preve 17.05.2011 |
Originally Posted by photojojo
I understand this, however what I'm trying to figure out if there's a way to say assign the first knob to browse through effects(maybe a set of chained presets?) and have the other three adjust there paramters respectively. maybe Im just dreaming heh |
| Nannie Preve 17.05.2011 | still a work in progress but I thought I'd share, even though mine has issues w/ pads acting on there own, others do not, and its pretty awesome still for only $75 + s/h believeing of eliminating filter knob (definitely eliminating vol. knob hah) and the hi/mid/lo and adding more effects controls. anyone know or can point me in the right direction to setting up the knobs so that they contol any effect I select in traktor instead of a pre-defined effect? here's the mpk mini midi presets u need to upload to the controller http://www.4shared.com/file/60Y9SAsI...presetccs.html please let me know how you believe I could better this setup. edit: known issues: to play track you need to press shift.2 + play, shift.2 is also nudge -, so the track moves when u do so, causing to go out of sync, just tap the sync button again for now til i work around that. filter knob: like the image says you need to rotate ful left then right ... back to middle prior to activating filter for it to work correctly, otherwise you will jump in at a random rotation. effects: drama sweep / echo frz works fine (drama sweep is alway on w/ the knob) but beatmasher will start near the middle after drama sweep has been initiated on the track, need to to a full rotation right then left to clear this. anyone know of a way to get around that issue plz let me know. ---- this last issue is more of a software one than a mapping one, once you have blending and gone on to the next track I would recommend un-syncing that track, if you do not u run the risk of the track slowing down or speeding up to the original tempo once you stop the previous track, I believe this has to do w/ having the clock set to auto. ---- EDIT EDIT image is labeled wrong for the effects DECK A = 1 & 3 DECK B = 2 & 4 Sorry for the confusion |
| Nannie Preve 18.09.2011 | so I've changed a few things, dont have a visual representation yet. got rid of filter. knobs from the left(top row Deck A bottom Deck B) are 1.beat slicer preset chop, not sure of the actual chop setting. 2.white noise build up, still set up to echo off w/ the same key on the keyboard +shift...note this is no longer the last key on the right for DeCK B, it is the one just to the let of it) //other shift + knob function = hi-kill 3.beatmasher from 0-127 (u have to go to max then back to min before it will go all the way from 0-127 for some reason, never worked that out) //other shift + knob function = mid-kill 4.flanger //other shift + knob function = low-kill ... start/stop track no longer use's shift. also if you hit first 2 black keys(from the left) in each deck's key section, that switches specified deck to MASTER. -- ALSO THE PADS ARE SET-UP TO MATCH THE NUMBERS ON THE ACTUAL MINI, I.E. TOP ROW = CUES 5/6/7/8 BOTTOM ROW = 1/2/3/4 I hop that comes across ok.. when i get some time I'll up a new image explaining everything. --- here's the aka file you'll need to upoad to the mpkmini in order for it to match up to the attach .TSI file. http://www.filesonic.com/file/2055269974 |
| Brain Ferrito 30.07.2011 | please help me, im new to this, ive tried about 3 different mappings off this community and couldnt get any of them to work for FX with knobs, the knobs just dont do anything, am i doing something wrong or what? please help |
| Raisa Monceaux 08.07.2011 | thank you for going to the time to make this map and post it, i was looking around and trying to figure things out myself, becoming increasingly frustrated. it pretty much works for me, except that pad 3 is turning the main volume down in addition to its hotcue function. also i cant seem to get the filters to work. i am trying to use my mpk mini in conjunction with my reloop dj2. thanks |
| Nannie Preve 17.05.2011 |
Originally Posted by photojojo
I understand this, however what I'm trying to figure out if there's a way to say assign the first knob to browse through effects(maybe a set of chained presets?) and have the other three adjust there paramters respectively. maybe Im just dreaming heh |
| Leeanna Ayla 17.05.2011 | Nice! When you map the FX you have an FX select that tells it what effect to load. |
<< Back to Post and find Controller MappingsReply