My interpretation of the VCI-400
My interpretation of the VCI-400 Posted on: 08.03.2012 by Clarinda Petrow Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. | |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 22.04.2012 | Another update today with loads of new visuals UPDATE TO VERSION 1.4! GENERALS: major visual improvements to deck control modes: -you will now see CLEARLY DEFINED DECK PRESETS -embedded new visual details: -NORMAL DECK VIEW A&B (no fx), SAMPLE DECKS (fx), CUEPOINT JUGGLE (fx) -access to FX CONTROL VISUALS upon pushing any button in fx mode -access to BROADCAST & RECORD SECTION visualized (broadcast function now on former "advanced panel mode" button) -returning back to DECK A&B will hide the effect section -FX ADJUSTMENTS: -echo support will now reset state to zero if pushed twice -in the BEATSLICE ROW (effect will now grow tension from one button to another in the destination from left to right) -FX BUTTONS (the ones below the filter knobs) on section c & d now: -ensure an easy way to enter or leave SNAP & QUANT MODE (section c) -show or hide control values and advanced panel mode (section d) VCI-400 Mapping by LittleFranky (Version. 1.4).zip |
| Clarinda Petrow 18.04.2012 | Hey folks, today i am glad to show you my new version of the vci mapping (1.3). Full description below GENERALS IN 1.0: -NORMAL DECK CONTROL on deck A&B -KILL FUNCTION on high-mid-low as well as filter below CUE DECKS -BROWSE through tracks and folders by holding down the shift button and moving jogwheel or the browse encoder -mapped the main headphone button to FULLSCREEN MODE -adapted the cool ECHO SUPPORT from "Tonal Desire" ->press leftern encoder to activate the freeze mode then you can adjust the lenght by moving -embedded LED SUPPORT for most buttons -added beatjumps "MODE 1"(8 counts) on each bottom row (glowing red on the edge of the controller) -added sample deck support on "MODE 2" -added loop jumps on "MODE 3" (4 buttons) managed to get FULL 4-FX SUPPORT on traktor pro 2 switch to Decks C&D to enter the EFFECT SECTION: -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of the FOUR PREMAPPED EFFECT COMBINATIONS choose from one of the (glowing) "cue" buttons on each side -activate the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue" buttons below the ones of the group section UPDATE TO VERSION 1.1! GENERALS: improved LED SUPPORT -now "play", and both "back & forth" buttons indicate BEAT PHASE MONITOR (kinda liked this to beatmatch without the sync button ;D) -TRACK-END WARNING embedded (buttons between cue and "forth" now light up if a track is going to end soon) -RECORD BUTTOn in the upper left (the one above the pitch fader) will also light up on recording (press again to end record) -equal button on deck b will now show the ADVANCED PANEL -the one above the record button still affects the "LOOP ACTIVATION MODE" on each deck FX MODE CHANGES IN 1.1: -recalibrated the acceleration/rotation value on the upper group effects (you will now have a longer range of the basic 4 presets to really be able to dig into some values) -embedded some BEATSLICER BUTTONS (idea from "MRBedroomDJ") to cue points 5-8 (really fun to play with just try ) -REMOVED THE VINYL "FX-PANEL MODE BUTTON"(effects will now themselfes change to the right fx-panel mode) NOTE HERE: the first push will SET the fx-panel, the second will ACTIVATE the effect -REMOVED THE PITCH BEND FX CAPABILITY and changed it to the NORMAL TEMPO BEND(instead you now have access to the deck "c-&d volume faders" to ADJUST FX) -embedded the LOOP CONTROL ENCODER to "fx mode" -added new features to the small buttons below the cue's to control TTFX (leftern buttons here load presets, rightern ones activate the "fx buttons 1 & 2" I really like to play around with the 75% TTFX (you can easily chop-up the beat by using the "c&d fx-faders" and right away pull it back to crush into the mix) UPDATE TO VERSION 1.2! GENERALS: -e.g. some LED ADJUSTMENTS -some PROBLEMS WITH HOTCUE BUTTONS -& further things i am too lazy to mention here VCI-400 now fully supports SAMPLE DECKS: -mid "mode" of the 6 buttons at the bottom now SWITCHES VISUAL DECK CONTROL to sample decks c&d -deck c & d "gain,hi-,mid-" and "low" knobs now ADJUST THE VOLUME of the belonging SAMPLE DECKS to fade-in or out UPDATE TO VERSION 1.3! GENERALS: -UPDATET 3 PARAMETERS of GROUP-JOG-FX & DRY/WET: ->now parameters switch back to 0-STATE if tension to the wheel is released (to embedd another of Ean's brilliant ideas ;D) -introducing the NEW WAY TO LOAD SAMPLES ->toggle deck C&D HEADPHONE BUTTON (LED will light up) it will light up as you're now in LOAD MODE -press one of the sample deck buttons to load a sample -push HP-BUTTON again to LEAVE LOAD MODE VCI-400 Mapping by LittleFranky (vers 1.3).zip |
| Clarinda Petrow 31.03.2012 | Ah thank you a lot MrBedroomDJ I really appreciate your work all around traktor! keep going Now to my newest updates! VERSION 1.2 includes: some general bugfixes: -e.g. some led adjustments -some problems with hotcue buttons -& further things not to mention here general workover vci 400 now fully supports SAMPLE DECKS: -mid "mode" of the 6 buttons at the bottom now switches visual deck control to sample decks c&d -deck c & d "gain,hi-,mid-" and "low" knobs now adjust the volume of the belonging sample decks ("1,2,3,4") -rightern "mode" now activates cues 2,3,4,5 instead of the loop jumps (led support) -updated rightern group fx preset to "peakfilter, delay, n/a" because the old preset was kind of unfortunately chosen VCI-400 Mapping by LittleFranky (vers 1.2).zip |
| Clarinda Petrow 15.03.2012 | Hey guys after some time I nearly finished my new version of the mapping - improved a lot and changed some basics. VCI-400 Mapping by LittleFranky (vers 1.1).zip I'd be really glad to hear what you believe about my mapping. criticism is always a way to improve. seriously my mapping can't face ean's one on his version of the vci-400 but it works fine for me so far. |
| Clarinda Petrow 08.03.2012 | Hey out there, recently I managed to finish my first traktor mapping for the VCI-400. Did it because i wasn't happy with the decent mappings I found. I got a lot of expressions from Ean Golden and his VCI-400 Special Edition. Furthermore I added ideas from a guy called "MRBedroomDJ" on Youtube. His Videos really inspired my work. Generals: -normal deck control on deck a&b (kind of self-explanatory) -mapped the main headphone button to fullsceen mode -adapted the cool echo support from "Tonal Desire" (if u need help check out his description on traktorbible.com) -added led support for most buttons -added beatjumps "mode 1"(8 counts) on each bottom row (glowing redon the edge of the controller) -added sample deck support on "mode 2" -added loop jumps on "mode 3" (4 buttons) -managed to get full 4fx support on traktor pro 2 -you can switch to Decks C&D to enter the EFFECT SECTION -here you can either select the SINGLE FX unit up top or the GROUP FX by clicking the VINYL BUTTON -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of four premapped effect combinations choose from one of the (glowing) "cue"buttons on each side -activation of the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue"buttons below the ones of the group section -here i premapped some effects to the bottom row -the pitch fader acts as "3 in one module". it manages both the amount of the first parameter as well as the dry/wet encoder and on top of that switches the effect on I will add the full description as soon as i can to share my points with you. |
| Clarinda Petrow 29.04.2012 | Of course i'd do that but for any reason i don't recieve the automatic confirmation email oO |
| Leeanna Ayla 22.04.2012 | Please add your mapping here http://maps.djranking s.com/ |
| Clarinda Petrow 22.04.2012 | Another update today with loads of new visuals UPDATE TO VERSION 1.4! GENERALS: major visual improvements to deck control modes: -you will now see CLEARLY DEFINED DECK PRESETS -embedded new visual details: -NORMAL DECK VIEW A&B (no fx), SAMPLE DECKS (fx), CUEPOINT JUGGLE (fx) -access to FX CONTROL VISUALS upon pushing any button in fx mode -access to BROADCAST & RECORD SECTION visualized (broadcast function now on former "advanced panel mode" button) -returning back to DECK A&B will hide the effect section -FX ADJUSTMENTS: -echo support will now reset state to zero if pushed twice -in the BEATSLICE ROW (effect will now grow tension from one button to another in the destination from left to right) -FX BUTTONS (the ones below the filter knobs) on section c & d now: -ensure an easy way to enter or leave SNAP & QUANT MODE (section c) -show or hide control values and advanced panel mode (section d) VCI-400 Mapping by LittleFranky (Version. 1.4).zip |
| Clarinda Petrow 18.04.2012 | Hey folks, today i am glad to show you my new version of the vci mapping (1.3). Full description below GENERALS IN 1.0: -NORMAL DECK CONTROL on deck A&B -KILL FUNCTION on high-mid-low as well as filter below CUE DECKS -BROWSE through tracks and folders by holding down the shift button and moving jogwheel or the browse encoder -mapped the main headphone button to FULLSCREEN MODE -adapted the cool ECHO SUPPORT from "Tonal Desire" ->press leftern encoder to activate the freeze mode then you can adjust the lenght by moving -embedded LED SUPPORT for most buttons -added beatjumps "MODE 1"(8 counts) on each bottom row (glowing red on the edge of the controller) -added sample deck support on "MODE 2" -added loop jumps on "MODE 3" (4 buttons) managed to get FULL 4-FX SUPPORT on traktor pro 2 switch to Decks C&D to enter the EFFECT SECTION: -the GROUP SECTION is being controlled by the belonging jogwheel (try out you will see the connection of the three parameters just like in some of ean goldens mappings) -to select one of the FOUR PREMAPPED EFFECT COMBINATIONS choose from one of the (glowing) "cue" buttons on each side -activate the effects by putting pressure onto the jogwheel (make sure to have at least a decent amount of sensitivity set to the wheel upon pushing down) -the SINGLE SECTION is being controlled by the "cue" buttons below the ones of the group section UPDATE TO VERSION 1.1! GENERALS: improved LED SUPPORT -now "play", and both "back & forth" buttons indicate BEAT PHASE MONITOR (kinda liked this to beatmatch without the sync button ;D) -TRACK-END WARNING embedded (buttons between cue and "forth" now light up if a track is going to end soon) -RECORD BUTTOn in the upper left (the one above the pitch fader) will also light up on recording (press again to end record) -equal button on deck b will now show the ADVANCED PANEL -the one above the record button still affects the "LOOP ACTIVATION MODE" on each deck FX MODE CHANGES IN 1.1: -recalibrated the acceleration/rotation value on the upper group effects (you will now have a longer range of the basic 4 presets to really be able to dig into some values) -embedded some BEATSLICER BUTTONS (idea from "MRBedroomDJ") to cue points 5-8 (really fun to play with just try ) -REMOVED THE VINYL "FX-PANEL MODE BUTTON"(effects will now themselfes change to the right fx-panel mode) NOTE HERE: the first push will SET the fx-panel, the second will ACTIVATE the effect -REMOVED THE PITCH BEND FX CAPABILITY and changed it to the NORMAL TEMPO BEND(instead you now have access to the deck "c-&d volume faders" to ADJUST FX) -embedded the LOOP CONTROL ENCODER to "fx mode" -added new features to the small buttons below the cue's to control TTFX (leftern buttons here load presets, rightern ones activate the "fx buttons 1 & 2" I really like to play around with the 75% TTFX (you can easily chop-up the beat by using the "c&d fx-faders" and right away pull it back to crush into the mix) UPDATE TO VERSION 1.2! GENERALS: -e.g. some LED ADJUSTMENTS -some PROBLEMS WITH HOTCUE BUTTONS -& further things i am too lazy to mention here VCI-400 now fully supports SAMPLE DECKS: -mid "mode" of the 6 buttons at the bottom now SWITCHES VISUAL DECK CONTROL to sample decks c&d -deck c & d "gain,hi-,mid-" and "low" knobs now ADJUST THE VOLUME of the belonging SAMPLE DECKS to fade-in or out UPDATE TO VERSION 1.3! GENERALS: -UPDATET 3 PARAMETERS of GROUP-JOG-FX & DRY/WET: ->now parameters switch back to 0-STATE if tension to the wheel is released (to embedd another of Ean's brilliant ideas ;D) -introducing the NEW WAY TO LOAD SAMPLES ->toggle deck C&D HEADPHONE BUTTON (LED will light up) it will light up as you're now in LOAD MODE -press one of the sample deck buttons to load a sample -push HP-BUTTON again to LEAVE LOAD MODE VCI-400 Mapping by LittleFranky (vers 1.3).zip |
| Clarinda Petrow 31.03.2012 | Ah thank you a lot MrBedroomDJ I really appreciate your work all around traktor! keep going Now to my newest updates! VERSION 1.2 includes: some general bugfixes: -e.g. some led adjustments -some problems with hotcue buttons -& further things not to mention here general workover vci 400 now fully supports SAMPLE DECKS: -mid "mode" of the 6 buttons at the bottom now switches visual deck control to sample decks c&d -deck c & d "gain,hi-,mid-" and "low" knobs now adjust the volume of the belonging sample decks ("1,2,3,4") -rightern "mode" now activates cues 2,3,4,5 instead of the loop jumps (led support) -updated rightern group fx preset to "peakfilter, delay, n/a" because the old preset was kind of unfortunately chosen VCI-400 Mapping by LittleFranky (vers 1.2).zip |
| Charline Dye 15.03.2012 | Welcome to DJTT community
s LittleFranky! I'm MrBedroomDJ on YouTube. Happy to see some one getting something from my little videos!!! Mapping is tedious, but rewarding. I believe you will find that you will always be revising and changing parts of your mapping over time. Cheers |
| Leeanna Ayla 15.03.2012 | MRBedroomDJ is a member here. I'm sure he'll pop in shortly. |
| Clarinda Petrow 15.03.2012 | Hey guys after some time I nearly finished my new version of the mapping - improved a lot and changed some basics. VCI-400 Mapping by LittleFranky (vers 1.1).zip I'd be really glad to hear what you believe about my mapping. criticism is always a way to improve. seriously my mapping can't face ean's one on his version of the vci-400 but it works fine for me so far. |
<< Back to Post and find Controller MappingsReply