Traktor Pro 2 XY Pad mapping
Traktor Pro 2 XY Pad mapping Posted on: 16.05.2012 by Logan Bimonte Ok, So I managed to set uop the cue points on my Korg Nanopad Original (Like a lot of folks, mine arrived dead, so I had to rip it apart and separate the pads), that was easy.I am so frustrated at not being able to get the XY pad to sound though! I say sound, because when I run my finger over it, I see the FX unit engaging, however, it doesn't alter the sound of the track! I feel like Im so close, but am just missing something! Any help would be much appreciated, even if it's a snap shot of what your mapping looks like. EVEN if it's a NanoPad2 - That would be easy to alter, as I could juts delete the extra hotcues, right? Pleas help! Many thanks, Dan | |
| Kellie Myrum 16.05.2012 |
Originally Posted by Danengland
|
| robin loo 16.05.2012 |
Originally Posted by Stewe
|
| Logan Bimonte 16.05.2012 | Ok, So I managed to set uop the cue points on my Korg Nanopad Original (Like a lot of folks, mine arrived dead, so I had to rip it apart and separate the pads), that was easy. I am so frustrated at not being able to get the XY pad to sound though! I say sound, because when I run my finger over it, I see the FX unit engaging, however, it doesn't alter the sound of the track! I feel like Im so close, but am just missing something! Any help would be much appreciated, even if it's a snap shot of what your mapping looks like. EVEN if it's a NanoPad2 - That would be easy to alter, as I could juts delete the extra hotcues, right? Pleas help! Many thanks, Dan |
| Kellie Myrum 19.05.2012 | Take a look at restoring parameters when switching FX. If it's assigned then remove marker from the box. Open preferences and then find it at effect section. If that doesn't help then it's something with mapping. |
| Logan Bimonte 19.05.2012 | Sorry for the delay there, I had another more pressing issue that had to be taken care of - Turned out Traktor wasn't a big fan of my rubbidh 1g amd athlon netbook! Now the proud owner of a MacBook. Much better The other issue still remains though. Here's a video I took of what it's sounding like right now. As you can see, the dry/wet doesn't engage when I use the XY pad. Also, when I release my finger from the pad, effects 2 and 3 go to 50% instead of 0%. Finally, it doesn't affect the track that's playing, only adds an effect. @LoopBeatz, The original nanopads are a little old now, and the tape has stuck a lot of the pads to each other. Mine arrived next to dead. This video fixed it though Gotta love youtube! haha |
| Lillie Resue 16.05.2012 | Excuse me..new to this...what do you mean when you said you have rip it apart and separate the pads |
| Logan Bimonte 16.05.2012 | It looks like fx amounts. They are the only dials that move. I'll double check when I get back home |
| Kellie Myrum 16.05.2012 |
Originally Posted by Danengland
|
| Logan Bimonte 16.05.2012 | I don't mind the effect happening when the deck is stopped, that could be fun to play around with, I just want it to affect the song when the deck is playing too! Right now, it seems to be working independently of any deck playing. |
| robin loo 16.05.2012 |
Originally Posted by Stewe
|
| Logan Bimonte 16.05.2012 | Not a dumb question at all! I'm very new to mapping, so you're right on to check the basics! When I get home I'll check, and update accordingly. Thanks! |
| Kellie Myrum 16.05.2012 | Maybe this is dumb question but have you engaged /fx unit on/ buttons at mixer section? |
| Logan Bimonte 16.05.2012 | Ah I see what you're saying about the wet/dry. I have since mapped that to the pitch bend so it comes on upon pressing the xy. Only thing is, when I take my finger off, the effect goes to 50% rather than zero! Also, the effect just seems to be a layered sound (gator and drive), eater than affecting the actuall deck playing... |
| robin loo 16.05.2012 | you mapped the pad to control the amount of two effects, i guess? sounds to me like the dry/wet of the FX is set to 0.. |
<< Back to Post and find Controller MappingsReply