QS Novation Twitch Mapping

Home :: Post and find Controller Mappings :: QS Novation Twitch MappingReply
QS Novation Twitch Mapping
Posted on: 20.07.2012 by Latrice Atcherson
v0.5.1 -- Corrective Release
Fixed the LED on Cue button of Deck B (it wasn't lighting up properly)
Inverted the Touch strip "swipe" action to reflect expected behavior

v0.5 -- Initial Release
There are still a few buttons available for mapping.
The last mode (beat grid) is empty right now, will probably be IG mapping.

I'm hoping to make a walk-through video, I just have to figure out the software(s) to use.

How to use this mapping
Import using the Add button in TP's Controller Manager.

This mapping uses Twitch's Advanced mode for complete control.

To switch to Advanced mode:
1. Press down the close and open button where the Browser knob is.
2. While those two are held down, press down on the Browser knob.
3. All the lights should turn off.
4. Open TP.

* It's recommended to switch to Advanced mode BEFORE opening TP.
* TP 2.5.0 minimum
* This is a TWO deck mapping

Credits:

* Thanks to Bread for the controller picture and inspiration.

MAPPING REFERENCE PICTURE

DOWNLOAD FROM DJTT (SIGNUP REQUIRED)

DOWNLOAD FROM MY DROPBOX (NO SIGNUP)
Latrice Atcherson
02.09.2012
Originally Posted by azmanian_devil
How do you switch between single/group mode in effects? I had this question for Viper's mapping as well as I wasn't able to use his cool combo effects.
Shift + Button under D/W .. that should change from group to single (and vice-versa).
Tillie Schnurbusch
30.08.2012
Originally Posted by quirkysilva
Glad to hear you got it working!

1) No, right now there isn't a mapping to assign effects to decks. I "designed" the mapping effect 1/3 to be for Deck A and 2/4 to be for Deck B.. I'll have to believe of a clever way to support such feature..

2) Plooping mode is based on this video:

3) To change effects in group mode, it's Shift + Knob 1/2/3.. in single mode, it's Shift + D/W
Thanks for your help in explaining this. I have a quick question, which might be a stupid question too.

How do you switch between single/group mode in effects? I had this question for Viper's mapping as well as I wasn't able to use his cool combo effects.

Liking the mapping so far, I'll try out P-looping and see if I can use those last pad banks as Grat. Will update you if I manage to get that working well.
Tillie Schnurbusch
29.08.2012
Originally Posted by quirkysilva
Did you get the latest version? v0.5.1 should have fixed the bugs..

What TP version are you using? And the best way is to simply use the import option in the controller editor, not the big "import" button.
I was able to get this working after re-installing my drivers. Seems like I was getting issues with all mappings. I am able to import the files individually using the controller editor import button. Just a few points and questions:

1) Love the S4-esque ability to adjust effects settings and turn on/off. Is there a mapping to turn effect decks ON/OFF for each deck? that would be handy to prevent effects from bleeding to the other track.

2) Could you explain the P-Loop pads?

3) How do you change effects? SHIFT + DRY/WET is not working for me.

Thanks for your help!
Tillie Schnurbusch
20.07.2012
Sweet! Will give it a spin toevening when I get home and give some feedback when I can.

Thanks for the hard work Silva.

Originally Posted by quirkysilva
v0.5 -- Initial Release
There are still a few buttons available for mapping.
The last mode (beat grid) is empty right now, will probably be IG mapping.

I'm hoping to make a walk-through video, I just have to figure out the software(s) to use.

How to use this mapping
Import using the Add button in TP's Controller Manager.

This mapping uses Twitch's Advanced mode for complete control.

To switch to Advanced mode:
1. Press down the close and open button where the Browser knob is.
2. While those two are held down, press down on the Browser knob.
3. All the lights should turn off.
4. Open TP.

* It's recommended to switch to Advanced mode BEFORE opening TP.
* TP 2.5.0 minimum

Credits:

* Thanks to Bread for the controller picture.

MAPPING REFERENCE PICTURE

DOWNLOAD FROM DJTT
Latrice Atcherson
20.07.2012
v0.5.1 -- Corrective Release
Fixed the LED on Cue button of Deck B (it wasn't lighting up properly)
Inverted the Touch strip "swipe" action to reflect expected behavior

v0.5 -- Initial Release
There are still a few buttons available for mapping.
The last mode (beat grid) is empty right now, will probably be IG mapping.

I'm hoping to make a walk-through video, I just have to figure out the software(s) to use.

How to use this mapping
Import using the Add button in TP's Controller Manager.

This mapping uses Twitch's Advanced mode for complete control.

To switch to Advanced mode:
1. Press down the close and open button where the Browser knob is.
2. While those two are held down, press down on the Browser knob.
3. All the lights should turn off.
4. Open TP.

* It's recommended to switch to Advanced mode BEFORE opening TP.
* TP 2.5.0 minimum
* This is a TWO deck mapping

Credits:

* Thanks to Bread for the controller picture and inspiration.

MAPPING REFERENCE PICTURE

DOWNLOAD FROM DJTT (SIGNUP REQUIRED)

DOWNLOAD FROM MY DROPBOX (NO SIGNUP)
Latrice Atcherson
02.09.2012
I can select any of the four effects to change using the knobs, he wants to assign FX unit to a specific deck.. so he could have 4 effects on Deck A for example.

I believe it makes the mapping pretty complex. May be easier to have some sort of flexible mapping that doesn't have as many effect combos that require specific bank assignments.. will have to believe about it.. suggestions?
Latrice Atcherson
02.09.2012
Originally Posted by azmanian_devil
How do you switch between single/group mode in effects? I had this question for Viper's mapping as well as I wasn't able to use his cool combo effects.
Shift + Button under D/W .. that should change from group to single (and vice-versa).
Tillie Schnurbusch
30.08.2012
Originally Posted by quirkysilva
Glad to hear you got it working!

1) No, right now there isn't a mapping to assign effects to decks. I "designed" the mapping effect 1/3 to be for Deck A and 2/4 to be for Deck B.. I'll have to believe of a clever way to support such feature..

2) Plooping mode is based on this video:

3) To change effects in group mode, it's Shift + Knob 1/2/3.. in single mode, it's Shift + D/W
Thanks for your help in explaining this. I have a quick question, which might be a stupid question too.

How do you switch between single/group mode in effects? I had this question for Viper's mapping as well as I wasn't able to use his cool combo effects.

Liking the mapping so far, I'll try out P-looping and see if I can use those last pad banks as Grat. Will update you if I manage to get that working well.
Latrice Atcherson
30.08.2012
Glad to hear you got it working!

1) No, right now there isn't a mapping to assign effects to decks. I "designed" the mapping effect 1/3 to be for Deck A and 2/4 to be for Deck B.. I'll have to believe of a clever way to support such feature..

2) Plooping mode is based on this video:

3) To change effects in group mode, it's Shift + Knob 1/2/3.. in single mode, it's Shift + D/W
Tillie Schnurbusch
29.08.2012
Originally Posted by quirkysilva
Did you get the latest version? v0.5.1 should have fixed the bugs..

What TP version are you using? And the best way is to simply use the import option in the controller editor, not the big "import" button.
I was able to get this working after re-installing my drivers. Seems like I was getting issues with all mappings. I am able to import the files individually using the controller editor import button. Just a few points and questions:

1) Love the S4-esque ability to adjust effects settings and turn on/off. Is there a mapping to turn effect decks ON/OFF for each deck? that would be handy to prevent effects from bleeding to the other track.

2) Could you explain the P-Loop pads?

3) How do you change effects? SHIFT + DRY/WET is not working for me.

Thanks for your help!
Latrice Atcherson
28.08.2012
Did you get the latest version? v0.5.1 should have fixed the bugs..

What TP version are you using? And the best way is to simply use the import option in the controller editor, not the big "import" button.
Tillie Schnurbusch
27.08.2012
Hey QS,

I'd been away for a while so I didn't get to try this out. A couple of things. First, I wasn't able to get it to run properly the first time I tried it, I re-imported each file individually again and it gave me the functionality. But I still wasn't able to get all the controls running properly. the Cue/Play on the left deck wasn't working and the touch strips were kinda wack. I tried switching to advanced mode before launching traktor too.

Any help? Also, what's the best way to import this mapping?
Fausto Silberstein
17.08.2012
Overall, this is a pretty interesting mapping design for the Twitch. I really do enjoy playing with this one. Only wish I had more mapping experience for I would add the instant gratification myself. Looking forward to future updates, great work bro.
Latrice Atcherson
13.08.2012
Bumping it up just to know if anyone played with the mapping or has any suggestions? Reasons on why you HAVEN'T tried it yet?
Latrice Atcherson
22.07.2012
New corrective release, v0.5.1 ..
Latrice Atcherson
19.07.2012
Yeah, just noticed the touch strip "swipe" when the decks aren't playing isn't up to par, I'll work on that.

Also forgot to mention this is strictly a two deck mapping.
Tillie Schnurbusch
20.07.2012
Thanks for this QS! Looking forward to giving this a spin later toevening when I get back home.
Tillie Schnurbusch
20.07.2012
Sweet! Will give it a spin toevening when I get home and give some feedback when I can.

Thanks for the hard work Silva.

Originally Posted by quirkysilva
v0.5 -- Initial Release
There are still a few buttons available for mapping.
The last mode (beat grid) is empty right now, will probably be IG mapping.

I'm hoping to make a walk-through video, I just have to figure out the software(s) to use.

How to use this mapping
Import using the Add button in TP's Controller Manager.

This mapping uses Twitch's Advanced mode for complete control.

To switch to Advanced mode:
1. Press down the close and open button where the Browser knob is.
2. While those two are held down, press down on the Browser knob.
3. All the lights should turn off.
4. Open TP.

* It's recommended to switch to Advanced mode BEFORE opening TP.
* TP 2.5.0 minimum

Credits:

* Thanks to Bread for the controller picture.

MAPPING REFERENCE PICTURE

DOWNLOAD FROM DJTT
Latrice Atcherson
20.07.2012
Reserved for future use.

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy