TSP2 "Scratch" + "Pitchbend" mode on jogwheels? (Xone:4D)
Home :: Post and find Controller Mappings :: TSP2 "Scratch" + "Pitchbend" mode on jogwheels? (Xone:4D)Reply
TSP2 "Scratch" + "Pitchbend" mode on jogwheels? (Xone:4D) Posted on: 07.09.2012 by Isabell Deveau I just got a Xone:4D and of course i found several mappings on the net. However they`re too overloaded for me since i would love to use the jogs in "Scratch" (i know they aren`t good for that) and "Pitchbend" mode only.I understood that i most probably need to configure some modifier to switch between modes pressing a button but i couldn`t get it working. Maybe someone can help me out here and tell me what i have to map a) to activate the "Scratch Mode" for the jogs b) to activate the "Pitchbend" Mode for the jogs c) to switch between modes pressing a button TIA! | |
| Isabell Deveau 07.09.2012 | I just got a Xone:4D and of course i found several mappings on the net. However they`re too overloaded for me since i would love to use the jogs in "Scratch" (i know they aren`t good for that) and "Pitchbend" mode only. I understood that i most probably need to configure some modifier to switch between modes pressing a button but i couldn`t get it working. Maybe someone can help me out here and tell me what i have to map a) to activate the "Scratch Mode" for the jogs b) to activate the "Pitchbend" Mode for the jogs c) to switch between modes pressing a button TIA! |
| Kellie Myrum 07.09.2012 | Yes, same button it is. As for banding and scratching you can use "jog turn" command to both functions, only with different sensitivity settings. Encoder / relative |
| Isabell Deveau 07.09.2012 | Okay got that modifier toggling button working i believe (need to add-in this two times with the same button, right?) However i don`t know about the modes @ Deck Common. Is it Tempo Bend, Tempo Bend (stepless) or Jog turn? I know that the jog is an encoder for sure but i don`t know what to select to seek, bend and scratch. Wahhh. |
| Kellie Myrum 07.09.2012 | It really is that easy Let me know how it goes! |
| Isabell Deveau 07.09.2012 | Thats sounds pretty easy, Stewe Thanks a lot in advance. I will check it out and give feedback! |
| Kellie Myrum 07.09.2012 | First set one button to be toggling modifier. This will be your pitchband/scratch activator. Add in Modifier 1 Modifier conditions / M1=0 Type of controller-button Interaction mode-direct Set to value-1 Add in Modifier 1 Modifier conditions / M1=1 Type of controller-button Interaction mode-direct Set to value-0 Map pitchband to jogwheel and give it modifier condition of M1=0 Map scratch to jogwheel and give it modifier condition of M1=1 |
<< Back to Post and find Controller MappingsReply