Remix Deck mapping for Kontrol X1 (OS X)

Home :: Post and find Controller Mappings :: Remix Deck mapping for Kontrol X1 (OS X)Reply
Remix Deck mapping for Kontrol X1 (OS X)
Posted on: 05.06.2012 by Somer Vanstraten
Finally, i managed to get my x1 working with remix decks, mbp 13 with Lion, using BOME'S midi translator PRO (i'm using the demo version if you wanna try)(I CANT FIND A FREE MIDI TO MOUSE TRANSLATOR FOR MAC!! if you have one, tell me.) and native midi mapping in tractor.

here is a video of all the functions.

sorry for the poor quality, and no, i was not believeing about the music but only to show the mapping, so sorry another time.



16 samples, 4 pages, controls over filters, eqs, fx unit 3 and volumes.
play stop deck, sync, pith bend, enable fx and key lock in single slot, loops and load set from list.
I believe all the necessary functions are mapped.

cheers, Cionni.

(video should be up in minutes, and i repeat, if you know any free translator, i'll edit this and make it with the free app)
Raymond Toquinto
28.09.2012
Originally Posted by CionniAsDj
Midi mapping for controlling only volumes, filter and loops.
For launching clips i was using Bomes pro
any way you can upload your mapping on the site cant seem to get it to work
Somer Vanstraten
27.06.2012
Originally Posted by royal5555
hmm sorry have you a short instruction?

i open the "remix.bmtp" file in traktor. But it doesn't work.
this file is the bome pro preset!
that convert the midi note to the mouse movements
Somer Vanstraten
15.06.2012
Originally Posted by GabriElMidiSmasher
grande!!!!

scusami... ma questo programma da quanto ho capito simula i movimenti del mouse
Leeanna Ayla
15.06.2012
Originally Posted by GabriElMidiSmasher

sorry but this program as i understand simulates mouse's movements, is that correct?
Yes
Deirdre Quaschnick
15.06.2012		grande!!!!

scusami... ma questo programma da quanto ho capito simula i movimenti del mouse
Wenona Murro
07.06.2012
Originally Posted by CionniAsDj
mouse clicks, working good because i assign a mini delay in every column, like first column 0 ms, second 1 ms, third 2ms, forth 3 ms.
in that way i'm sure it will not go in conflict.
I can post the bome preset if you want, anyway, i assign the movement and click to the down press of the button, not on the release, if you do it when releasing it doesn't work good.

have a look at the bome's project if you want
remix.bmtp.zip
Cool man, I will take a look later today.
Somer Vanstraten
07.06.2012
Originally Posted by jhyphinwill
Is this working with midi clicks or keystrokes? If key strokes, how did you get the clips below the first row to launch? Would you mind posting your tsi?

I was able to use Bomes Translater Pro to launch the clips using mouse clicks. It's not really working that great as I was using two commands; one command to find the x, y co-ordinates of the mouse, the second command to left click the mouse on the sample slot. Is there a better way that works like a direct and not a toggle?
mouse clicks, working good because i assign a mini delay in every column, like first column 0 ms, second 1 ms, third 2ms, forth 3 ms.
in that way i'm sure it will not go in conflict.
I can post the bome preset if you want, anyway, i assign the movement and click to the down press of the button, not on the release, if you do it when releasing it doesn't work good.

have a look at the bome's project if you want
remix.bmtp.zip
Leeanna Ayla
06.06.2012
Originally Posted by oliosky
For now.
Johnetta Olewine
06.06.2012
Originally Posted by photojojo
Not knocking it at all. I've got it working on my MBP with the Lemur app, but would much rather have actual clicky buttons. I just believe it's important that we don't forget that the F1 does more than these workarounds.
For now.
Leeanna Ayla
06.06.2012
Originally Posted by CionniAsDj
Like everyonelse around the community that have done the "hack".
With lemur machine and osc, in Windows.

This is another workaround, noone made it for OSX, and i believe is like the more complete.

Obviously i'm waiting for the driver hack myself

When i saw the enthusiasm for the other hacks i decided to put online mine also.
Not knocking it at all. I've got it working on my MBP with the Lemur app, but would much rather have actual clicky buttons. I just believe it's important that we don't forget that the F1 does more than these workarounds.
Somer Vanstraten
06.06.2012
Originally Posted by photojojo
Not trying to be negative, but if it's just mouse movements it's not complete. There's things the F1 will do that can't be done with mouse clicks.
Like everyonelse around the community that have done the "hack".
With lemur machine and osc, in Windows.

This is another workaround, noone made it for OSX, and i believe is like the more complete.

Obviously i'm waiting for the driver hack myself

When i saw the enthusiasm for the other hacks i decided to put online mine also.

Originally Posted by Deejaesnafu
i dont have mac , but good work!
It works also for Windows.
Bome's is multiplatform.
Somer Vanstraten
05.06.2012		Finally, i managed to get my x1 working with remix decks, mbp 13 with Lion, using BOME'S midi translator PRO (i'm using the demo version if you wanna try)(I CANT FIND A FREE MIDI TO MOUSE TRANSLATOR FOR MAC!! if you have one, tell me.) and native midi mapping in tractor.

here is a video of all the functions.

sorry for the poor quality, and no, i was not believeing about the music but only to show the mapping, so sorry another time.



16 samples, 4 pages, controls over filters, eqs, fx unit 3 and volumes.
play stop deck, sync, pith bend, enable fx and key lock in single slot, loops and load set from list.
I believe all the necessary functions are mapped.

cheers, Cionni.

(video should be up in minutes, and i repeat, if you know any free translator, i'll edit this and make it with the free app)
Britney Cressley
20.12.2012		Quick dumb question

I am using extreme Mappings and the only thing I couldn't get it done was to set the cue buttons to play individual slots. The only option a I have when I am mapping, is to set whatever button to slot 1,2,3 or 4 of the desired RMX deck.

To simplify, I want the CUE buttons 1,2,3 and 4 on Kontrol X1 to play 4 single shots on the slot 1, just the way you did on the video. How do I that?

Thanks
Dee
Raymond Toquinto
28.09.2012
Originally Posted by CionniAsDj
Midi mapping for controlling only volumes, filter and loops.
For launching clips i was using Bomes pro
any way you can upload your mapping on the site cant seem to get it to work
Somer Vanstraten
28.09.2012		Midi mapping for controlling only volumes, filter and loops.
For launching clips i was using Bomes pro
Raymond Toquinto
26.09.2012		hey what midi mapping did you use for it to work really want to try this
Jacquelyne Krawetz
11.07.2012		Its not free but controllermate is a cheaper ($25) alternative to bome.

Im working on a mapping now but it has a steep learning curve
Somer Vanstraten
27.06.2012
Originally Posted by royal5555
hmm sorry have you a short instruction?

i open the "remix.bmtp" file in traktor. But it doesn't work.
this file is the bome pro preset!
that convert the midi note to the mouse movements
Bryce Gramaglia
27.06.2012		hmm sorry have you a short instruction?

i open the "remix.bmtp" file in traktor. But it doesn't work.
Somer Vanstraten
15.06.2012
Originally Posted by GabriElMidiSmasher
grande!!!!

scusami... ma questo programma da quanto ho capito simula i movimenti del mouse
Leeanna Ayla
15.06.2012
Originally Posted by GabriElMidiSmasher

sorry but this program as i understand simulates mouse's movements, is that correct?
Yes
Deirdre Quaschnick
15.06.2012		grande!!!!

scusami... ma questo programma da quanto ho capito simula i movimenti del mouse
Wenona Murro
07.06.2012
Originally Posted by CionniAsDj
mouse clicks, working good because i assign a mini delay in every column, like first column 0 ms, second 1 ms, third 2ms, forth 3 ms.
in that way i'm sure it will not go in conflict.
I can post the bome preset if you want, anyway, i assign the movement and click to the down press of the button, not on the release, if you do it when releasing it doesn't work good.

have a look at the bome's project if you want
remix.bmtp.zip
Cool man, I will take a look later today.
Somer Vanstraten
07.06.2012
Originally Posted by jhyphinwill
Is this working with midi clicks or keystrokes? If key strokes, how did you get the clips below the first row to launch? Would you mind posting your tsi?

I was able to use Bomes Translater Pro to launch the clips using mouse clicks. It's not really working that great as I was using two commands; one command to find the x, y co-ordinates of the mouse, the second command to left click the mouse on the sample slot. Is there a better way that works like a direct and not a toggle?
mouse clicks, working good because i assign a mini delay in every column, like first column 0 ms, second 1 ms, third 2ms, forth 3 ms.
in that way i'm sure it will not go in conflict.
I can post the bome preset if you want, anyway, i assign the movement and click to the down press of the button, not on the release, if you do it when releasing it doesn't work good.

have a look at the bome's project if you want
remix.bmtp.zip
Wenona Murro
06.06.2012		Is this working with midi clicks or keystrokes? If key strokes, how did you get the clips below the first row to launch? Would you mind posting your tsi?

I was able to use Bomes Translater Pro to launch the clips using mouse clicks. It's not really working that great as I was using two commands; one command to find the x, y co-ordinates of the mouse, the second command to left click the mouse on the sample slot. Is there a better way that works like a direct and not a toggle?
Leeanna Ayla
06.06.2012
Originally Posted by oliosky
For now.
Johnetta Olewine
06.06.2012
Originally Posted by photojojo
Not knocking it at all. I've got it working on my MBP with the Lemur app, but would much rather have actual clicky buttons. I just believe it's important that we don't forget that the F1 does more than these workarounds.
For now.
Leeanna Ayla
06.06.2012
Originally Posted by CionniAsDj
Like everyonelse around the community that have done the "hack".
With lemur machine and osc, in Windows.

This is another workaround, noone made it for OSX, and i believe is like the more complete.

Obviously i'm waiting for the driver hack myself

When i saw the enthusiasm for the other hacks i decided to put online mine also.
Not knocking it at all. I've got it working on my MBP with the Lemur app, but would much rather have actual clicky buttons. I just believe it's important that we don't forget that the F1 does more than these workarounds.
Somer Vanstraten
06.06.2012
Originally Posted by photojojo
Not trying to be negative, but if it's just mouse movements it's not complete. There's things the F1 will do that can't be done with mouse clicks.
Like everyonelse around the community that have done the "hack".
With lemur machine and osc, in Windows.

This is another workaround, noone made it for OSX, and i believe is like the more complete.

Obviously i'm waiting for the driver hack myself

When i saw the enthusiasm for the other hacks i decided to put online mine also.

Originally Posted by Deejaesnafu
i dont have mac , but good work!
It works also for Windows.
Bome's is multiplatform.
Leeanna Ayla
05.06.2012		Not trying to be negative, but if it's just mouse movements it's not complete. There's things the F1 will do that can't be done with mouse clicks.
Ada Matzkin
05.06.2012		i dont have mac , but good work!

<< Back to Post and find Controller MappingsReply

Copyright 2012-2023
DJRANKINGS.ORG n.g.o.
Chuo-ku, Osaka, Japan

Created by Ajaxel CMS

Terms & Privacy