Korg Nanopad2 - How to map XY Pad
Korg Nanopad2 - How to map XY Pad Posted on: 15.02.2012 by Carolyne Mccottry Hey guys, first post here. I bought a nanopad2 a couple months ago, and have been using it along for my sets on traktor, but I can't for the life of me figure out how to map the XY pad. Any help guys? | |
| Christinia Wagher 11.07.2013 |
Originally Posted by djtempo7
So, in the Control Editor window it defaults to the Scene 1 screen, but I guess the xy pad doesn't change with with the Scenes (it's 'Global' on the controller) so you need to open the Global settings by clicking the top-right 'Global' button. This opens the 'Global' window, where you can navigate to the 'xy' tab to adjust the settings of the xy-pad. Attachment 18813 Attachment 18814 |
| Chasidy Heckenbach 16.02.2012 |
Originally Posted by willywongka
if not you'll have to use something like midi-ox to dump out what midi it is sending and then manually add it in traktor. a quick google for the user guide says u can specify what CCs u want it to send out using the nano editor |
| Carolyne Mccottry 15.02.2012 | Hey guys, first post here. I bought a nanopad2 a couple months ago, and have been using it along for my sets on traktor, but I can't for the life of me figure out how to map the XY pad. Any help guys? |
| Christinia Wagher 11.07.2013 |
Originally Posted by djtempo7
So, in the Control Editor window it defaults to the Scene 1 screen, but I guess the xy pad doesn't change with with the Scenes (it's 'Global' on the controller) so you need to open the Global settings by clicking the top-right 'Global' button. This opens the 'Global' window, where you can navigate to the 'xy' tab to adjust the settings of the xy-pad. Attachment 18813 Attachment 18814 |
| Janell Jaworowski 05.05.2013 | Can someone help me here? I've got the Nanopad2 connected, drivers installed, the "pads" can be assigned in the Editor... but... I can't seem to figure out how to assign continuous controller numbers to the X/Y Trackpad. In the editor, I can click on a "pad" and it pulls up a window that allows the entry of all the particular information related to what it is I'm trying to control (i.e. CC number, note number...). But... the "click-and-enter-info" method that works with the drum pads does not work with the XY pad. How do I get the CC numbers programmed to the X and Y directions of the pad? Chip |
| Tory Edkins 15.12.2012 | I hope this is helpful. When you open up the Korg editor you can adjust the send for x-y, but if you didn't adjust anything(at least in my case -mac) they were set to: (x) Ch1->CC->001 And (y) Ch1->CC->002 You could also set the editor to "learn" mode to see what they are set to if you don't want to lose other portions of your mapping by fiddling around to much. As @Zestoi said. |
| Chasidy Heckenbach 16.02.2012 |
Originally Posted by willywongka
if not you'll have to use something like midi-ox to dump out what midi it is sending and then manually add it in traktor. a quick google for the user guide says u can specify what CCs u want it to send out using the nano editor |
<< Back to Post and find Controller MappingsReply